Manifold removal - Will I need new injector seals?
I'm removing the manifold on my Blob STI to fit a Perrin intake hose. When I do this, do I need to fit new seals to the injectors? They're a bit pricey at £10 per injector! Thought they'd be half that in all honesty.
|
you shouldnt need injector seals if your just removing the manifold as it all comes off together ,, manifold to head seals will need replacing though
|
Aren't the injectors going to be taken out as part of the process? I was under the impression that they would need to come out with the manifold. I've already ordered manifold gaskets and got some Phenolic spacers too. Just 6mm. :thumb:
I was hoping to get away with reusing gaskets on one side of the spacers and new ones on the other side actually. Any reason to worry about that? |
Right, found a guide then realised I am actually swapping my manifold for another one due to a knackered bolt hole on mine so yeah, I guess I will need seals. It's early.....
|
Originally Posted by Jay Cartay
(Post 11949791)
Aren't the injectors going to be taken out as part of the process? I was under the impression that they would need to come out with the manifold. I've already ordered manifold gaskets and got some Phenolic spacers too. Just 6mm. :thumb:
I was hoping to get away with reusing gaskets on one side of the spacers and new ones on the other side actually. Any reason to worry about that? I wouldn't reuse the gaskets , had them leak more times than its been worth so I change them more or less every time the mani is off,, unless I have already done them not long before then I may try the old ones but if there the standard one I change them defo:thumb: |
All times are GMT +1. The time now is 02:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands