330mm x 28mm AP copy discs £250 a pair
 

We can supply our own rotors to replace AP ones , 330mm x 28mm , 12 bolts on a PCD of 203.2mm , we have 2 style grooves , either 6 curved grooves or our new J hook groove.

They are direct replacements to AP's

£250 a pair inc vat , can ship anywhere , next day UK delivery is £15

01656 723060
ian@godspeedbrakes.co.uk
www.godspeedbrakes.co.uk

Many other sizes available

I have the prodrive alcon front brake set up on my P1 but have 2 piece discs so how do i identify the bells so as to just replace the discs.

Are these a piece or a set of 2?

Email me a photo of them and I can tell if they are ours , we can supply you them to fit at the same price

Yes 2 discs for £250 , a left and right

Ok are the Jhooks disk for use on track also.

yes suitable for road and track

these floating or one piece.

Neither , they are bolted , and 2 piece

And good for track use.

yes , been selling them for years with very little problems , as with all our discs you get a 12 month guarantee against warping even if you do track days

Ok thanks

Picture plz

any pics? also do they come pre assembled? or as a kit with bolts etc

This is only the rotors for £250 , you assemble them yourself with your existing bells.
If we supply 2 piece discs and bells , like our Alcon prodrive replacement discs and bells , they are assembled ready to fit straight on
Cheers Ian

prob my crap wording but thats what i ment by floating :thumb:

so by floating you meant fixed :luxhello:


I made up some brackets to space the calipers further out on my 330mm setup, can you do a 356mm disk to fit on a 330 bell?

Yes our discs and bells are bolted , not on bobbins.

No we cannot offer you a 355mm disc to fit 330mm bells , the centre hole on our 355mm castings is too big , could go to 348mm with a 12 x 203.2mm PCD
Cheers Ian

floating meaning disc is a ring and bolted to the bell

https://cimg9.ibsrv.net/gimg/www.sco...1f1054416b.jpg

Hello mate would you be able to do a set of front discs for a r32 355mm × 32mm 5/100pcd thanks

Can you do some 365mm version to suit Alcon 6pots ian?

Floating discs are on bobbins not bolts, look at a sports bikes front discs next time you see one.:thumb:

Yes we could make you some discs and bells , email your requirements to ian@godspeedbrakes.co.uk

We don't make a disc that size , but can supply Alcon discs

Cheers Ian
01656 723060

I have emailed you thanks