Sold
 

Hi,

Driving through Belgium yesterday and I had big end failure.

Car is currently in Calais and I will be recovering it tomorrow.

I will update with parts and photos soon, but if there is anything your after let me know.

Based in Purfleet, so Essex side of QE2 Bridge.

Hi, how much for the front and rear seats and door cards please?

would be great if they could be quickly packaged as i will ship them to Malta. Shipping company is also in Purfleet (RM15 4YE)

Hi mate, front seats are buddy club recliners. I have the rear seats in the garage but none of the brackets or bolts.

I have the the front door cards but not the rear. The car has been stripped out for a while.

Is that lot any good to you?

Hello mate, what colour is the car. Cheers.

Red, but it has a silver wing on the drivers side and a white one that is a little out of shape on the passenger side. Front passenger door has light damage also.

In general body work isn't great

Cheers anyway mate, I'm after a silver nearside rear door.

Sorry to hear :(

Let's have some pics
Might be intrested in the buddy club seat if my fat arse can fit in :)


https://cimg2.ibsrv.net/gimg/www.sco...346dc37904.png

Not sure if you got one on mate but First dibs on the wrx splitter please if you have one on :thumb:

Afternoon, is it 22G red? What condition is the bonnet in?

It is a shame but I have had plenty of fun out of it.

Ok so Seats, I am 36" waist and 6ft2 and I feel like the seats fit me just right, have used them with a harness and with the seatbelt and are great either way.

There is a slight problem with the passenger rail which I will send pics through and explain if you are still interested. It still fits in the car fine and is secure.


They are on buddy club super low rails and I have the side mounts you can put on them if you want to switch to buckets later.

Here is a link to the seats, the pics on the site are from when I first fitted them, I have carelessly got a bit of grease on the passenger seat so it will need a clean. And they are over a year old so not mint but still decent.

http://www.sportseats4u.co.uk/index.php?_a=viewProd&productId=2275

and the rails...

http://www.sportseats4u.co.uk/index.php?_a=viewProd&productId=1415

I would like to see £400 from them, Ill sort some pictures out tomorrow

The lip is pretty rough after being caught / folded on a few kerbs and I used tiger seal and used multiple self taping screws to attach it so I might struggle to remove it.

It is 22g red the paint does have swirl marks and the bonnet does have stone chips. Could do with a thorough detail. It has a black wrx bonnet scoop fitted.
It will have to be one of the last things off the car though so you might have to wait a couple of months if you want it. Unfortunately I live in a flat so I am stripping parts off outside.

If you need a bonnet, mine is undamaged, it just has quite severe lacquer peel. I'm just seeing if its cheaper to get a replacement bonnet rather than getting it sprayed again.

If your local your welcome to come and have a look at it, I wouldn't want a lot for it.

You have a PM

I won't be able to let everything go from the car right away, the plan is to strip and sell as much as possible and then I need to trailer it to a friends garage to remove the gearbox and anything else. Anything you are interested in or want more pictures off please let me know.


Most standard parts are available.

1 litre washer bottle and pump to fit under windscreen cowling

Battery relocation kit including bus bar to mount where washer bottle was, 150amp circuit breaker, cables and a new odyssey pc680 battery cage. no battery included.

5 x OZ Ultraleggera 17”x7.5” 5x100pcd

4 of them with AD08’s could do with replacing soon, the other 1 has centre cap missing and no tyre.

Tein s.tech lowering springs.

Megan racing civic C Pillar brace used as boot brace.

Carbon Fibre fuel pump covers

Buddy Club seat rails and racing spec Reclining Seats Black.

Defi triple gauge pod (Replaces dash top clock)

Defi oil temp, oil pressure, boost pressure, green back with red needles.

Defi advance controller

Perrin Hand brake button. Black.

STI centre console (STI alloy trim around shift boot)

STI Group N Engine, and dogbone mounts.

New water pump in box.

PPP ECU and chips out of keys





https://cimg1.ibsrv.net/gimg/www.sco...67e9a6c632.jpghttps://cimg2.ibsrv.net/gimg/www.sco...e5aa3570d5.jpg
https://cimg6.ibsrv.net/gimg/www.sco...ae56ec5858.jpg
https://cimg9.ibsrv.net/gimg/www.sco...af61ad13d0.jpg
https://cimg0.ibsrv.net/gimg/www.sco...ed71b20f8e.jpg
https://cimg3.ibsrv.net/gimg/www.sco...bde901b85c.jpg
https://cimg4.ibsrv.net/gimg/www.sco...0fd8e11169.jpg
https://cimg5.ibsrv.net/gimg/www.sco...473bf5d299.jpg
https://cimg9.ibsrv.net/gimg/www.sco...bf3cef9c5b.jpg
https://cimg0.ibsrv.net/gimg/www.sco...b37e88bb45.jpg
https://cimg3.ibsrv.net/gimg/www.sco...4e0ce8fe27.jpg
https://cimg4.ibsrv.net/gimg/www.sco...b69502dfbd.jpg
https://cimg6.ibsrv.net/gimg/www.sco...9b45e095fc.jpg
https://cimg8.ibsrv.net/gimg/www.sco...a8411c82aa.jpg
https://cimg0.ibsrv.net/gimg/www.sco...aa019e8418.jpg
https://cimg1.ibsrv.net/gimg/www.sco...85eb378810.jpg

Pics for Turbotog

https://cimg9.ibsrv.net/gimg/www.sco...83d8a328d3.jpg
https://cimg0.ibsrv.net/gimg/www.sco...9a62ad1c2c.jpg
https://cimg1.ibsrv.net/gimg/www.sco...2cab5e0e91.jpg
https://cimg2.ibsrv.net/gimg/www.sco...91123e002b.jpg

price on defi with all links and sensors?

also could you post a pic of them with lights on

https://cimg1.ibsrv.net/gimg/www.sco...bbf3ff0f7e.jpg
https://cimg2.ibsrv.net/gimg/www.sco...cddf2d05a.jpeg
Would like £450 for the complete set, wiring / sensors etc, just to note the 2 front clips on the pod are damaged so it sits up at the front slightly. It never bothered me and it still fits securely but it is worth mentioning.

Battery is dead on the car so these are older photos.

BUMP ..
Hi are the back lights all good no cracks etc how much inc p&p please

Yep back lights are good, no cracks or damage, £100 delivered for the pair.

How much for the header tank?

What are you looking for on the wheels? What sort of condition are they in?

Thanks
 

Thanks Logan all bits landed today superbly packaged :D :notworthy

How much for the washer nozzles bud? One of mine has gone rusty so would be interested if yours aren't!

Sorry Jay, already sold.

pm sent

:) Cool, glad your happy with everything.

Made me think of gladiators when I finished wrapping it all up.

https://cimg5.ibsrv.net/gimg/www.sco...346fdb6738.jpg

Mine are working fine, I'll check them up close later on for any sign of rust. PM me an offer and I'll add postage.

:lol1::lol1: felt like one when I'd finished taking it all off
but very appreciated all the time and effort :thumb: