Widetrack spec c breaking
2004 spec c in 51E white
Covered 69,000 with some kms Sensible offers considered �� Start if list for now pics to follow over the weekend. Spec c long motor semi closed block big port heads etc SOLD Spec c gearbox prop and diff £2500 Spec c inlet manifold throttle body fuel rails loom injectors £450 Twinscroll headers Roger Clarke 3" decat exhaust complete SOLD Oem twin scroll Downpipe £150 Oem centre pipe and back box £60 5 x114 hubs excellent condition Spec c front alloy arms SOLD Front and rear subframes top mount intercooler with one piece y pipe £250 Electric folding mirrors £125 Spec c ltd blue seats SOLD Door cards SOLD Face lift centre console SOLD Sweeping clocks £225 Facelift steering wheel very good condition £220 Carpet £60 In boot intercooler spray £250 Roof flap and roof lining £400 Brembos Quick rack Anti fuel surge assembly SOLD Drive shafts very good condition Oem dump valve £35 Front bumper £300 Rear bumper needs pair £80 Spec c alloys and tyres £600 Rear alloy lateral arms £100 set Spec c rear Brace £60 Titanium strut Brace £125 Headlights £250 Rearlights £125 Clutch and flywheel good con plenth of life Vf36 turbo £550 |
How much for the anti surge assy
|
Pm sent
|
Pics of both braces please
RC exhaust too please |
Pm sent
|
Aluminum bootlid?
|
Originally Posted by KB_S1
(Post 11939849)
Aluminum bootlid?
Cheers Paul |
Wing
Hi Paul, do you have the drivers side wing for sale ? Thanks jimmy
|
Originally Posted by Top mount scooby
(Post 11940627)
Hi Paul, do you have the drivers side wing for sale ? Thanks jimmy
Cheers Paul |
6 speed still available? DCCD version?
Also what alloys are they? BBS? |
Yes 6 speed dccd TY856WB6JA
Enkei spec c wheels Cheers Paul |
Any pics of the headlights? Factory hid correct..
|
Paul I will take the front alloy arms and prob the front and rear subframes
|
Originally Posted by bobbyd182
(Post 11940652)
Any pics of the headlights? Factory hid correct..
Cheers Paul |
Originally Posted by Arch
(Post 11940671)
Paul I will take the front alloy arms and prob the front and rear subframes
|
PM sent
|
Pm sent
|
PM send
|
All pm replied
|
Hi Paul, Im after the O/S/F Arch Liner and the 2 rear rubber Trims that protect the rear wheel arches
|
Can I have pics of the full RCM system
|
Originally Posted by Craig1982
(Post 11941349)
Hi Paul, Im after the O/S/F Arch Liner and the 2 rear rubber Trims that protect the rear wheel arches
Cheers Paul
Originally Posted by Wmscooby
(Post 11941357)
Can I have pics of the full RCM system
Cheer Paul |
Originally Posted by Paul C
(Post 11941894)
Hi mate I'll have an arch liner I'll check rear arch trims.
Cheers Paul Hi mate I'll get you that tomorrow needs a bit of a clean. Cheer Paul did you manage to check them ifso do you have pics please ,thanks |
Hi have you got the rear 2 pot brembo calipers only for sale?
Also I'm after the adapter on the top of the steering pump to hose (to res) Thanks |
Originally Posted by Craig1982
(Post 11942956)
did you manage to check them ifso do you have pics please
,thanks
Originally Posted by turbotog
(Post 11943076)
Hi have you got the rear 2 pot brembo calipers only for sale?
Also I'm after the adapter on the top of the steering pump to hose (to res) Thanks |
You wouldn't happen to have a jdm rear number plate bracket on a shell you are willing to drill out the spot welds, for some reason mine was removed by a previous owner to fit full size plates and I would like to put it back to standard.
Also I could do with a central bracket on rear bumper that secures lower part of bumper to rear panel along with the fixings Thanks |
I'd rather keep on the shell tbh mate
|
Up
|
Are you willing to split the RCM exhaust?
|
What's the Spec C rear brace look like?
|
All times are GMT +1. The time now is 02:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands