ScoobyNet.com - Subaru Enthusiast Forum - Classic scooby boost gauge location

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)

- General Technical (https://www.scoobynet.com/general-technical-10/)

- - Classic scooby boost gauge location (https://www.scoobynet.com/general-technical-10/1047262-classic-scooby-boost-gauge-location.html)

paulroun

09 May 2017 09:25 PM

Classic scooby boost gauge location

Hi guys I know this possible been asked before
But were would you t into for boost gauge

I have t into top pipe comming from boost controller and seems to be working apart from when I accelerate the needle starts jumping around
Thanks

alcazar

10 May 2017 09:36 AM

What make of gauge? some cheap ones do that.

Mine feeds off an unused nipple on the inlet manifold, it was blanked off before.

johned

10 May 2017 11:43 AM

Mine fitted as above.

jaygsi

10 May 2017 12:48 PM

Pictures? My mates trying to fit a boost gauge at mo.

paulroun

10 May 2017 09:27 PM

https://cimg2.ibsrv.net/gimg/www.sco...e743638771.jpgMine connected via t red pipe going into top of boost controller
Boost gauge unbranded but flickering when accelerating

johned

10 May 2017 09:27 PM

Just look behind the alternator on the inlet manifold and there is a rubber cover on an outlet on the manifold take that off and connect the boost gauge pipe to it.(classic impreza).

paulroun

10 May 2017 10:20 PM

https://cimg4.ibsrv.net/gimg/www.sco...33c6d83445.jpgWas connected to middle blue pipe
But that gave me -30 vac and didn't got into boost until flat out then only hit 11 psi

All times are GMT +1. The time now is 03:20 AM.