ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   Litchfield type 25 (https://www.scoobynet.com/scoobynet-general-1/1046230-litchfield-type-25-a.html)

XRS 02 April 2017 11:21 AM

I have leather seats in mine but a different colour. I recall Mog also had leather in his blue Spec C-based T25.

stantd04 03 April 2017 09:11 AM

I like the look of those. Does anyone know where Iain got them done?

Are the door cards trimmed in leather as well?

Buzzer2017 03 April 2017 09:13 AM

Door cards and rears etc all leather. Not to everybodies taste. Didn't like them at 1st myself...... growing on me like a wart.

XRS 03 April 2017 12:02 PM

The seats were done by Terry Reynolds at Concept Vehicle Interiors, Wickford Essex. 07703328611. That was 12 years ago of course, but they were competitively priced.

stantd04 03 April 2017 02:14 PM

Thanks, that's not far from me, I'll get in touch.

It's beginning to feel like dealing with a classic car - Turbo Dynamics referred me to Litchfield to get the turbo serviced, who referred me back to TD, saying they don't do Subaru's any more. I still had to go through Litchfield, who sent it to TD; then they sent it back to Tewkesbury after the work was done before shipping it back to me.

God help me if I need a new Milltek exhaust.
​​​​​​

T5NYW 03 April 2017 11:57 PM


Originally Posted by stantd04 (Post 11929959)
Yes, it started life as a daily driver by someone who used it as a rally rec car on the continent. Big spotlights on the front bumper (since replaced to get rid of the screws left after removal of the lights).


Does anyone know if Jenny Litchfield kept the list of what Type-25s are still in existence?
​​​​​

they did have some details of T25 but validifing them threw different personal plate changes is uber difficult :o regular customers are no problem

people were asking Iain for t20 and t25 badges on a regular basis.:Suspiciou

so a rough idea 2005 uk=£7k std JDM=£10k T20=£14k and T25=£18k. it doesnt take long to workout why peeps want a badge.

tony. T25 no34 :thumb:

T5NYW 04 April 2017 12:28 AM


Originally Posted by Buzzer2017 (Post 11928874)
VIN with GDB is confirmed as JDM
It has a rear wiper and is not a spec C, water bottles under the bonnet
I have the original receipt from litchfield for the car wirh a mk1 2.5 and for the mk2 rebuilt in 2012, American spec 2.5 block.

does the paperwork from iain match completely engine number with the chassis plate?

on the V5 form what dates does it say on 4B first registered and 4B1 first registered in uk?

theres a few fakes out there. servce history is key. T25 99/100 it will have it. imho

tony

XRS 04 April 2017 09:29 AM


Originally Posted by T5NYW (Post 11930690)
they did have some details of T25 but validifing them threw different personal plate changes is uber difficult :o regular customers are no problem

people were asking Iain for t20 and t25 badges on a regular basis.:Suspiciou

so a rough idea 2005 uk=£7k std JDM=£10k T20=£14k and T25=£18k. it doesnt take long to workout why peeps want a badge.

tony. T25 no34 :thumb:

£18k for a T25? Haven't seen them at that sort of money for a decade or so. Many will have paid less than half of that for theirs.

Not that I'm objecting of course :)

Also, engine number won't help identify a genuine T25. On my V5 it's listed as "EJ25" and is 1998cc :Whatever_

Buzzer2017 04 April 2017 10:15 AM


Originally Posted by T5NYW (Post 11930696)
does the paperwork from iain match completely engine number with the chassis plate?

on the V5 form what dates does it say on 4B first registered and 4B1 first registered in uk?

theres a few fakes out there. servce history is key. T25 99/100 it will have it. imho

tony


I'm in Ireland and only have the old UK number plate of VX54OMG.
Block has EJ25 and turbo dynamics plate on the turbo.
Build no14.
All the numbers etc match up.

scoobyraj 04 April 2017 11:28 AM

I remember seeing some Mk2 T25's go for around £20k past couple of years.
Don't know how realistic that is now...I'd be interested to know....considering/almost having to sell my hawkeye Aline T25.....any thoughts?

T5NYW 04 April 2017 11:14 PM


Originally Posted by XRS (Post 11930711)
£18k for a T25? Haven't seen them at that sort of money for a decade or so. Many will have paid less than half of that for theirs.

Not that I'm objecting of course :)

Also, engine number won't help identify a genuine T25. On my V5 it's listed as "EJ25" and is 1998cc :Whatever_

Ok take 25% off all those prices but I was trying to show why fake type 20's and T25's are quite common.

provenance seemed a bit sketchy hence why I asked when first registered in the U.K. IMHO

Tony

T5NYW 05 April 2017 12:24 AM


Originally Posted by Buzzer2017 (Post 11930723)
I'm in Ireland and only have the old UK number plate of VX54OMG.
Block has EJ25 and turbo dynamics plate on the turbo.
Build no14.
All the numbers etc match up.

Ok but you don't have the UK V5 form

Sorry something seems a bit odd but that doesn't make it wrong.

1) No. 14 seems too low a number being a widebody on a 54plate. it would be registered after 1st Sept 2014. Mine is No 34 registered 7th December. 20x T25's later

2) it also doesn't look to have AST suspension

3) that 2.5sti badge!!!

4) Does it have the oval inside badge and boot badge?



Many JDMs STi's even T20's & even UK's had T25 engines or suspension or both later in life . This was done by POWERSTATION But doesn't make them a LITCHFIELD T25.

. I'm booked into LITCHFIELD's Friday 7th & 21st I can ask him or Jenny . 👍

Regards

Tony

Buzzer2017 05 April 2017 01:01 AM

Hi
It has got the AST4100 suspension.
Plaque under the bonnet with no14
Oval plaque in front of the gearstick with no14.
Litchfield badge on the boot
Type25 also on the boot.
Numerous litchfield original booklets and receipts, 1 of which give a run down of parts in the engine.
Litchfield rebuilt the engine again in 2012 with the LM500 turbo etc.
If you can find out any additionalinfo that would be great.
As.above, VX54OMG was the original registration.

T5NYW 05 April 2017 10:42 AM

👍 as said provenance is key.

Looking at your GDB-23455667 number above the Model code GDB4XXX4X it's about 1,000 before mine. So must be one of the very first widebody versions.

does look like AST knobs. I've had on both my T20 or T25. But maybe earlier versions!!

XRS 05 April 2017 01:11 PM

Not sure how much you can rely on the build numbers. Mine was registered on 5th March 2005 and is build no. 27, so I have no idea why yours is no. 34 and registered three months earlier.
Also, at least one older car was converted by Iain as a T-25, so date of first registration isn't a foolproof method of verification either. From the documentation of this car I've seen it does look genuine, though I thought the VX54OMG car was owned by a member of the nobility and later had the Cosworth motor fitted.
Mine never had the T25 badge on the boot.

scoobiepaul 05 April 2017 02:13 PM

1 Attachment(s)
Attachment 25516
Rear badge on mine.

T5NYW 11 April 2017 12:25 AM


Originally Posted by XRS (Post 11930962)
Not sure how much you can rely on the build numbers. Mine was registered on 5th March 2005 and is build no. 27, so I have no idea why yours is no. 34 and registered three months earlier.
Also, at least one older car was converted by Iain as a T-25, so date of first registration isn't a foolproof method of verification either. From the documentation of this car I've seen it does look genuine, though I thought the VX54OMG car was owned by a member of the nobility and later had the Cosworth motor fitted.
Mine never had the T25 badge on the boot.

Discovered Mine wasn't converted to a T25 Till it was nearly 10 month old

Tony

Buzzer2017 27 April 2017 07:41 PM

Next question guys, anybody know what ECU would be on my car.
Hopefully a Ecutek because of the converted 2.5.
I think the original was a EasyEcu, with is not a drive by wire and unlike the Ecutek, is not compatible with racerom for auto blip , LC and antilag.

scoobiepaul 07 May 2017 06:13 PM

I am interested in what boost pressure the mark 1 T25 were originally set up to run, my one peaks at 1.26bar. Thanks in advance for any replies.

Buzzer2017 18 July 2017 01:06 AM

Anybody able to tell me how I get my clocks back to kph? Original JDM clocks in it. Based in Ireland and need miles to kph

scoobiepaul 19 July 2017 11:51 AM


Originally Posted by Buzzer2017 (Post 11954011)
Anybody able to tell me how I get my clocks back to kph? Original JDM clocks in it. Based in Ireland and need miles to kph

Could try here.

http://www.svaspeedos.co.uk/buy_spee...rs_online.html

T5NYW 22 July 2017 04:12 PM


Originally Posted by Buzzer2017 (Post 11954011)
Anybody able to tell me how I get my clocks back to kph? Original JDM clocks in it. Based in Ireland and need miles to kph

IIRC

When Iain Litchfield Mapped the JDM's, he did two corrections. JDM & UK Dash aren't compatible. UK used OBD and JDM was SSM Protocols


1)if original JDM had low speed Dash 0-180kmph he blanked the K over to show MPH.

2) if original JDM dash high speed 300KPH then he must have purchase 0-180kmph cover then again blanked of the K

3) Mapped ECU clocks pulse speed output.

4) Mapped ECU the DCCD speed correction

Tony

T5NYW 23 July 2017 10:58 AM


Originally Posted by Buzzer2017 (Post 11954011)
Anybody able to tell me how I get my clocks back to kph? Original JDM clocks in it. Based in Ireland and need miles to kph

Sorry you can buy the Japanese dash 180kmph clock inlay. In all sorts of colours and formats etc. You may even get one that converts/Scales it right for MPh. So no remapping required.

Mine definitely has black plastic square over the "K" of the Kmph. When light shine through It looks like mph but indicated speed wrong.
.

Tony

paulT25 29 August 2017 10:52 PM

Hi,
Late reply here number 51 here.


Crystal grey A line , now with a forged alan Jeffery 530 hp motor and tien suspension,.
see theres a A line for sale for over £20,000 on piston heads .

johned 30 August 2017 11:04 AM


Originally Posted by paulT25 (Post 11962776)
Hi,
Late reply here number 51 here.


Crystal grey A line , now with a forged alan Jeffery 530 hp motor and tien suspension,.
see theres a A line for sale for over £20,000 on piston heads .

Is the one on pistonheads in cambridge.

paulT25 30 August 2017 09:07 PM

Hi ,
yes mate that is the one up for sale .
exactly like mine , with less power.


suspension is now Tien , far better than the ast in my opion, as its more adjustable .


more power , front mount intercooler, etc.


and large alacon front brakes .
think its top money though but would be chuffed to that sort of monies for mine when I sell lol.

T5NYW 01 September 2017 12:50 AM

The issue is sometimes people try to create "history l" or "provenance" on this site for a non genuine T25 for financial gain.

Tony

XRS 01 September 2017 10:02 AM

Yes, I've seen a few fake T-25s. But that raises the question of when a T-25 is a T-25. Does it have to be as it left Litchfield's? I guess it must have a build number, but when the car is substantially changed is it still a T-25?

johned 01 September 2017 11:00 AM


Originally Posted by paulT25 (Post 11962938)
Hi ,
yes mate that is the one up for sale .
exactly like mine , with less power.


suspension is now Tien , far better than the ast in my opion, as its more adjustable .


more power , front mount intercooler, etc.


and large alacon front brakes .
think its top money though but would be chuffed to that sort of monies for mine when I sell lol.

I wonder if anyone has seen it in the flesh as it does not seem to be selling so is there something wrong with it other than the high price.

Buzzer2017 29 September 2017 07:20 PM

https://cimg7.ibsrv.net/gimg/www.sco...5ad1aaa034.jpg
https://cimg0.ibsrv.net/gimg/www.sco...6d8243bc4a.jpg
https://cimg2.ibsrv.net/gimg/www.sco...e1e5b704ba.jpg


All times are GMT +1. The time now is 11:47 AM.


© 2024 MH Sub I, LLC dba Internet Brands