|
jdm blobeye sti auction, worth it?
apologies in advance, ill be honest I joined just to give you guys the sad news that its time to part with my pride and joy #sob
I advertised it privately and just had dreamers and test pilots which I couldn't put up with so too it off the road for winter. ive put it on fleabay never sold anything on there before.. if you want to join in feel free, or make me an offer. http://rover.ebay.com/rover/0/e12000...,ext=ext,bu=bu thanks in advance, |
I sent you questions regarding the car 2 days ago.
Not had a response ? |
No Reserve.......:confused:.SJ.
|
It as had a plate change since the PS Remap as well.
|
Originally Posted by The Trooper 1815
(Post 11924220)
It as had a plate change since the PS Remap as well.
If the OP reads this, this is what I asked via Ebay. New message to: paugues6 Hi mate Few questions if that's ok. Who at Powerstation mapped it? Have the clocks been changed from KMH to MPH and has the restrictor been removed? Any rust around the arches or around the bottom of the spoiler? Has it been under sealed? Any under bonnet pictures? You say It's mapped to run at 2 Bar? Is that on standard internals? The OEM ECU will only run up to 1.55 Bar unless the map sensor has been changed. Has this been done and if so by who? Any known faults? Knocking suspension, slipping clutch etc? Thanks Boyd. |
Looks like another chancer.
|
Maxxis tyres with 400bhp lol
|
I didn't realise that we can now advertise without being a member?
|
Originally Posted by banny sti
(Post 11924231)
Maxxis tyres with 400bhp lol
|
Originally Posted by joe v3sti
(Post 11924233)
I didn't realise that we can now advertise without being a member?
|
400hp hahaha
|
Originally Posted by B0DSKI
(Post 11924227)
Yep the plate listed on the graph doesn't come up on the DVLA website.
If the OP reads this, this is what I asked via Ebay. New message to: paugues6 Hi mate Few questions if that's ok. Who at Powerstation mapped it? Have the clocks been changed from KMH to MPH and has the restrictor been removed? Any rust around the arches or around the bottom of the spoiler? Has it been under sealed? U Any under bonnet pictures? You say It's mapped to run at 2 Bar? Is that on standard internals? The OEM ECU will only run up to 1.55 Bar unless the map sensor has been changed. Has this been done and if so by who? Any known faults? Knocking suspension, slipping clutch etc? Thanks Boyd. That's enough questions to make any dodgy bugger switch his phone off never mind emailing you back :lol1::lol1::lol1: :thumb: You should make a proper thread advising on how to buy a scoob the proper wAy boss honestly sikkk questions indeed and then rest of the crew can chip in also with anything else to add to the advice :thumb: |
Originally Posted by ZANY
(Post 11924261)
q
That's enough questions to make any dodgy bugger switch his phone off never mind emailing you back :lol1::lol1::lol1: :thumb: You should make a proper thread advising on how to buy a scoob the proper wAy boss honestly sikkk questions indeed and then rest of the crew can chip in also with anything else to add to the advice :thumb: |
sorry I have been away for the weekend and have just got back, I guess there is no need to answer your questions via here or ebay.
Didn't realise there was so much hate in the community, I mean you don't actually now my story. business, kids, divorce.. I delt with Dirk mostly, they did most of the upgrades to get it to this power and it was progressively, I have the emails from him with invoices etc. for the record I have removed the plate for retention before sale. |
just got back from a weekend away. oh wow...so much hate!
|
Nothing to hate on its a JDM with bolt on mods, nothing wow :)
|
Still no answer to my questions?
|
Originally Posted by jayallen
(Post 11924240)
We can't but this guy is obviously doing us a favour by inviting us to buy his car...
|
| All times are GMT +1. The time now is 11:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands