ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Lighting and Other Electrical (https://www.scoobynet.com/lighting-and-other-electrical-14/)
-   -   cat 1 alarm activate with no cause (https://www.scoobynet.com/lighting-and-other-electrical-14/1045400-cat-1-alarm-activate-with-no-cause.html)

minguela 15 February 2017 06:29 PM

cat 1 alarm activate with no cause
 
Hi i'' diego from Spain,i have a uk spec rhd bugeye with category 1 alarm sistem and in the las month activate with no apparent cause
all doors,bonnet,boot and sunroof are closed,there isn't any moving items in vehicle,all air vents are closed

i see in the manual that could be damaged trigger swicth but they are all ok

Where are the alarm ECU in this vehicle?

Smithys STI 15 February 2017 07:08 PM

On a bug eye the alarm ECU is above the steering column in a gold security box.

minguela 15 February 2017 11:06 PM


Originally Posted by Smithys STI (Post 11919730)
On a bug eye the alarm ECU is above the steering column in a gold security box.

Thanks a lot mate

JDM_Stig 15 February 2017 11:16 PM

What make alarm is it, a lot of alarm tell you what has caused the alarm to trigger, this is can be shown either via the amount of flashes of the indicators when you next disarm the system, or the LED in the car can can flash the same information.

minguela 16 February 2017 01:14 PM

1 Attachment(s)
I don't know what make is it.
When i disarming led in the car light up about 30 seconds,and whe inarm the sistem the led flash all time

I think that could be volumetric sensor because i can desactivate with numeric keyboard and there isn't any problem but i'm not sure

JDM_Stig 16 February 2017 01:37 PM


Originally Posted by minguela (Post 11919967)
I don't know what make is it.
When i disarming led in the car light up about 30 seconds,and whe inarm the sistem the led flash all time

I think that could be volumetric sensor because i can desactivate with numeric keyboard and there isn't any problem but i'm not sure

That is a M series Fob.
http://www.scoobypedia.co.uk/uploads..._m30_codes.pdf

Page 5

minguela 16 February 2017 02:01 PM

Thanks!!

I'll try know what is the trigger that is cause this problem

I have covered ultrasonic with cel and not sound right now,but it's not the solution

Perdon for my english,it's very poor :(


All times are GMT +1. The time now is 06:27 PM.


© 2024 MH Sub I, LLC dba Internet Brands