Rough Idle, Stalls with throttle
Just built an EJ257.
First start-ups went very well. Oil pressure was good. Had good throttle response. Was very happy and couldn't wait to test drive it. But next day I wanted to look at it more closely by logging it, and then it started doing strange things :( First thoughts were fuel pressure and fuel filter, but fuel pressure is good and after I replace the fuel filter with a new on nothing changed. Got compression on all cylinderes. g/s, coolant temp are normal g/s go higher when stepping on the throttle, so throttle works. Final fueling base (estimated afr) is quite strange, jumps around, like the rpms do. Sometimes timing also jumps around a bit. Also swapped to my old (stock) injectors and flashed an old map. http://img5.fotos-hochladen.net/uplo...7igq9pfj1o.png http://img5.fotos-hochladen.net/uplo...zo9yqkivs0.jpg Hopefully someone has an idea, what it could be either mechanical or electrical. Thanks in advance |
All times are GMT +1. The time now is 08:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands