Originally Posted by stark
(Post 11972348)
Are these the vents advertised on eBay? What's the quality like? And do they seal well or does the wind whistle through them?
https://cimg8.ibsrv.net/gimg/www.sco...7dcacb71ba.jpg |
engine bay is more or less there now just a bit of tidying to do , its now running again but still need to do one or two more bits of wiring before all the seats and stuff go back in and then it still needs mapping for the alkatec ,, also fitted boost oil pressure and temp gauges
https://cimg7.ibsrv.net/gimg/www.sco...8a49127794.jpg https://cimg8.ibsrv.net/gimg/www.sco...149837abdb.jpg |
seats are now back in and the interior is starting to look like a car again
https://cimg3.ibsrv.net/gimg/www.sco...321694b05a.jpg https://cimg4.ibsrv.net/gimg/www.sco...54f5f89e2e.jpg https://cimg5.ibsrv.net/gimg/www.sco...1ba014d5d5.jpg |
Anymore updates chap ?
|
Originally Posted by Captainfunbags
(Post 11976570)
Anymore updates chap ?
still waiting on the spoiler to be sprayed and iv got another front bumper for it as I'm not happy with the fit of the current one need to fit the mud flaps and check everything is tight and I think thats about it then until mapping and wheel alignment once its out of the garage in the daylight ill get some pics up :thumb: |
still waiting on the new bumper and spoiler to get here but its more or less ready ,oh and need to fit my harnesses, should be ready for a MOT next week and then ill book mapping for the alcatek
:thumb::thumb::thumb: https://cimg5.ibsrv.net/gimg/www.sco...1d6a2b7d34.jpg |
interior is now finished ,, standard ecu is just so it runs, the alcatek is hidden under the dash :thumb:
https://cimg8.ibsrv.net/gimg/www.sco...ec7c55427a.jpg https://cimg0.ibsrv.net/gimg/www.sco...98223530f8.jpg https://cimg1.ibsrv.net/gimg/www.sco...62f821d6ec.jpg |
will be up for sale soon so anyone who is interested please feel free to pm me ,, as far as a px goes I would be willing to px with a newage sti and money my way
|
still doing a few bits to it as I'm not completely happy with the spec so upgrading some stuff,,, but got it out in the daylight for the first time the other day and got to say it looks very nice ,, since the pics the new bumper is fitted and spoiler is on but still not happy with the spoiler so will be getting a different one done I think lol
https://cimg8.ibsrv.net/gimg/www.sco...d600ef55e4.jpg https://cimg0.ibsrv.net/gimg/www.sco...a40ce5e86e.jpg https://cimg1.ibsrv.net/gimg/www.sco...51e020f0df.jpg |
this is now complete and ready for sale , will be going up for sale properly in mid jan once I'm back from holiday,, but happy to talk to anyone interested in it now and go over any details
|
Shame to see your selling it Dom after all the work you have put into it.
|
Originally Posted by gussy
(Post 11985381)
Shame to see your selling it Dom after all the work you have put into it.
iv got another cashmere yellow STI I'm sorting out to sell next year some time aswell but thats staying as a standard car this time lol |
here is the current spec in case anyone doesn't want to look though the posts
Shell prep shell has been fully stripped bare and all sound deadening removed extra plating added to the front turrets for more strength front panel was cut off and made stronger and lighter tunnels welded into the front of the chassis legs to allow for the front mount piping to have a shorter and safer run under the headlights full weld in roll cage ,including dash bar and though to the turrets roof bars and seat bars sill stand holes welded in fully welded in place parcel shelf lots of tags have also been added around the car to allow the loom and other bits to be secured safely and neatly rear arches have been rolled and flared for extra room interior sprayed silver outside and engine bay sprayed Skoda dynamic blue underside fully undersealed for extra protection Chassis-front newage front end used Newage front subframe (white) Newage front arms (highly polished) white line adjustable 24mm ajustable anti roll bar (red) CDF front drop links (race bushes) Newage steering rack with modified universal joint Chassis-rear R180 hubs R180 DIFF R180 shafts Rear WRC design tubular subframe (white) Solid mount rear T brace (bushes replaced with solid mounts) Rose jointed fully adjustable lateral arms (new) Rose jointed adjustable trailing arms (new) whiteline 24mm ajustable rear ARB (sprayed red) CDF rear drop links (to be fitted) Chassis protection - general exterior fully undersealed alloy sump/gearbox/rear diff guards (powder coated gold) Kevlar sill guards (new) Kevlar tank guard (new) MSA mud flaps (new) sill stands in gold Carbon WRC type teardrop mirrors (new) Bonnet pins (new) Rear window polycarbonate (new) side windows covered in msa window film (car comes with poly side windows unfitted) Group A twin roof vents (new) STI rear lights High level spoiler Headlamp protectors (new) light bar (new) Clear side repeaters (new) Brakes - suspension tein curciut master coilovers front brembo 4 pot brakes (repainted) rear brembo 2 pot brakes (repainted) new bleed nipples new vented and groved disc front and rear new minted pads all round Braided brake lines front to back (inside the car) Brake bias valve (new) hydraulic handbrake (new) Brake servo delete Wheels -tyres 17" Subaru STI alloys , just been refurbed 17" speedline ST2's (waiting to be fitted ) just been refurbed toyo T1R tyres all round , brand new RCM light weight wheel nuts (new £300) STI dust caps (new) full size spare Interior - safety Two matching bimarco front seats (Fia approved) (new) TRS harnesses (new) Flocked dash Omg steering wheel (new) Carbon passengers foot rest (new) GRP door cards (very light) , pockets added (new) Carbon dash center console (new) Race battery behind driver (New) Window washer behind passenger (new) driver and passengers seat mounted drinking system (both new) Brants rally timer OMP intercom system with matching helmets (brand new never worn) OMP helmet net (new) Map light All heaters removed and small electrical heater put in to clear screen Carbon fuel covers (new) OMP spare tyre strap (new) wiring loom stripped and all unneeded wires removed ignition and starter on buttons (new) new fuse board added for the in car extras defi gauges x 3 , boost , oil pressure , oil temp defi 80mm rev counter and shift light (new) Electrical plumbed in extinguisher (just serviced) OMP hand held extinguisher (new) cartek electric cut off (new) OMP seatbelt cutters (new) First aid kits Engine - gearbox alkatec ECU antilag and launch control enabled (to be mapped) Braided fuel lines front to back (inside car ) parrlell fuel rails braided lines with an6 fittings under the bonnet SX FPR with pressure gauge inlet manifold spacers 044 in tank pump swirl pot with built in fuel pump (sytec pump) bell mouth 3"-2.5" down pipe cobra RACE exhaust (very loud) Front mount intercooler , runs under headlights TD05 turbo Induction kit Oil cooler kit (disconnected at sandwich plate) inlet manifold redone in crinkle red alternator done in chrome and red newage power steering relocation MSA fuel sampling kit anodised bolt dress up kit cam belt covers dipped with Union Jack gearbox JDM 6 speed gearbox with matching hubs , shafts and diff Perrin short shift kit brand new gear knob |
|
bit of a walk around on my mates youtube channel
|
quick update for anyone who might be interested ,,, been in the garage a while over the winter not doing much ,, but iv now fitted the 6 speed box and rear end ,, and have done some engine bay bits to tidy things up (not to everyones taste but I like it ), added fuel rails and swirl pot ,, slowly getting there and hopefully won't change my mind about spec this time lol
https://cimg4.ibsrv.net/gimg/www.sco...d62dd3052e.jpg |
Originally Posted by domino46
(Post 12045609)
quick update for anyone who might be interested ,,, been in the garage a while over the winter not doing much ,, but iv now fitted the 6 speed box and rear end ,, and have done some engine bay bits to tidy things up (not to everyones taste but I like it ), added fuel rails and swirl pot ,, slowly getting there and hopefully won't change my mind about spec this time lol
https://cimg4.ibsrv.net/gimg/www.sco...d62dd3052e.jpg Any pictures of the fuel rails installed? =) |
Originally Posted by Itamar_M
(Post 12045632)
Any pictures of the fuel rails installed?
=) |
Well it’s passed it’s MOT , alignment next week then book mapping https://cimg5.ibsrv.net/gimg/www.sco...34c3588fd.jpeg https://cimg7.ibsrv.net/gimg/www.sco...d98ae410d.jpeg https://cimg8.ibsrv.net/gimg/www.sco...6561595ca.jpeg https://cimg9.ibsrv.net/gimg/www.sco...42cf8d754.jpeg |
thought id give a bit of a update on the rally car build ,,,, well its sold now ,,, brought by a rally driver all the way on the other side of the world in OZ ,,, so its been on a ship at sea for the last few months but its just arrived over there ,,, very proud to have a car being used properly over there
https://cimg0.ibsrv.net/gimg/www.sco...87386b5ad8.jpg https://cimg3.ibsrv.net/gimg/www.sco...e5ff3b0821.jpg |
=(
|
Good to see you got it moved on Dom sure i saw it down at rally day last year on one of the stands as i drove past
|
shes gone to a good home dom , have you bought something to replace the hatch and this yet ?
|
Originally Posted by RAGGY DOO
(Post 12061611)
shes gone to a good home dom , have you bought something to replace the hatch and this yet ?
iv got a blob sti that I brought to fly around in while I make my mind up but I think iv chosen the next motor lol ,there was a few on the list but iv got it down to one or two now lol,, im after a Bentley GT SPEED if I can get one that I like ,,, or possibly a Supersports but I prefer the speed really ,,, or possibly a M5 |
Originally Posted by gussy
(Post 12061539)
Good to see you got it moved on Dom sure i saw it down at rally day last year on one of the stands as i drove past
|
All times are GMT +1. The time now is 12:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands