Reversing camera help
 

I have a jdm hatch which came with a pioneer ND BC100 reversing camera fitted. I am looking to hook this up to my pioneer sph da120 head unit. I have traced out the end of the camera wiring and found the plugs are incompatible. Can anyone help point me in the right direction for adaptor/power supply needed to run this. Or will I have to bite the bullet and swap the camera out for the ND BC6

http://i1026.photobucket.com/albums/...psb1olmjdq.jpg

http://i1026.photobucket.com/albums/...pslmpbbr0i.jpg

http://i1026.photobucket.com/albums/...psxk6r9pm1.jpg

http://i1026.photobucket.com/albums/...psfxiywqzl.png

Thanks Chris

If the 2 red wires are identical then I'm confused...

But if one of the reds has a coloured stripe in the insulation, then I'd guess red is + volts, black is ground to power the camera and then the red with a stripe? and the brown are the camera output. One will be the video signal and the other will be the screen/ground for it.

Managed to translate the jap instructions for the camera and it requires a 8v feed instead of a simple 12v from head unit( that would make too much sense) have ordered a power supply so will see how it goes