Whiteline roll bars and other bits (Milton Keynes)
 

Hi all,

I have for sale some whiteline bits. Roll bars and roll bar mounts have been on the car for a little over a year but are still in good condition and have plenty of life left in them.
I would much rather collection (or meet if not too far) due to the size and weight of these items. I will post the smaller/lighter items if buyer covers cost of postage. I am open to offers but in no rush to sell so please no silly offers. TBH if the don't go for the prices I want I will just put them back on the car.

All these items fit many models but please check fitments for your car.

http://www.whiteline.com.au/product_...21-24&sq=23758
First up is the Whiteline KBR21-24 rear roll bar mounts. These have the 24mm bush but you can get other bushes to suit whatever bar size you have. They are very heavy duty much stronger than the stock mount.
Looking on whitelines website they fit most of the Subaru range from about 1989 to 2007 but please check to be sure.
RRP £104.66 I will take £70


http://www.whiteline.com.au/product_...SB751&sq=23699
Next we have Whiteline KSB751 Diff locking kit (never fitted). This fits on the outrigger greatly reducing the diff moving when you accelerate. These have never been used because my diff mounts were totally gone so I went full poly bush. This will give the same effect through. A very good but cheap upgrade as you really notice it.
Again these fit many cars. Most classics and newage but please check website to be sure.
RRP £31.36 - I will take £20




http://www.whiteline.com.au/product_...R36XZ&sq=23687
Next is the BSR36XZ 24mm rear roll bar. No rust and only paint that has flaked off is where the bolts go. I had it set to the middle hole.
I will admit I do miss this bar... The stock 16mm has made the rear feel very soft now. The supplied bushings have never been used on the bar because it was mounted with the roll bar mount listed above. I would also be willing to do a direct swap for the thinner BSR36Z 22mm bar if this is of any interest to anyone?
I used some old silicone hose cut and held in place to stop the bar moving around. Has not marked the bar and can be removed if you wish.
Fits most newage WRX and STi's but please check their website to be sure.
RRP £177.47 but I would take £120



http://www.whiteline.com.au/product_...SF12Z&sq=23684
Next up is the BSF12Z 22mm Front roll bar.
No rust and only paint that has flaked off is where the bolts go. I had it set to the firmest setting. Looking on the whiteline website this fits the newage WRX wagons and not much else.. Please check this to be sure.
I used some old silicone hose cut and held in place to stop the bar moving around. Has not marked the bar and can be removed if you wish.
RRP £156.79 I will take £110

Many thanks,
Rob

I'm very interested in the rear arb mounts I already have a whiteline arb 22mm.
Will it fit my arb ?

Oh and the rear diff lock bushes

Hi, the bushes in the mounts are 24mm to suit the 24mm bar I had on the car. You can get 22mm bushes to fit in the mounts from whiteline. according to whitelines website the part number for the 22mm bushes is W21047G but please check this out to ensure it is correct.

Many thanks,
Rob

I have whiteline bushes with my arb but I want to know is my bushes fit inside your u clamps or will I need to get Differant bushes?

I'll take the arb mounts if you throw in the postage. If okay, message me your paypal details. Cheers.

The mounts require different bushes. The ones in the mounts are about a centimetre wider.

My offer still stands

pm sent earlier today.

Diff lock kit and roll bar mounts sold. Roll bars still for sale. Thanks