Got the blob put for a bit of wash and shine today
4 Attachment(s)
Just finishing off my rotated set up for my Blob sti..
Mapping booked in for 3 weeks so towed it out the garage today and gave it bit of a wash and wax.. Can't wait to have it back on the road soon Attachment 31230 Attachment 31231 Attachment 31232 Attachment 31233 |
Very nice mate, did u fit the bonnet catches yourself ?? any tips as i will be fitting some myself soon.
Dubzy |
Originally Posted by Dubzy
(Post 11866977)
Very nice mate, did u fit the bonnet catches yourself ?? any tips as i will be fitting some myself soon.
Dubzy Got a mate of mine to do it for me who's a metal worker. Neatest job I've actually seen doing them. Not really got any tips but could take some pictures one night this week if that helps? |
Yeh that would be good buddy, a few pics of the underside of the bonnet and where the pins are located on the slam panel would be a help :thumb:
Are they Abw arches you have fitted ?? |
Any pics of your new rotated setup ?? im now at 150 miles of the 1000 mile run in , gonna take a while :freak3:
|
looks great :thumb:
What turbo are you running? GT30? what bhp are you hoping for? |
Ditto, looks fantastic
I do love those arches (when done well) |
Monstrously sickkkk:thumb:
|
Originally Posted by Dubzy
(Post 11866988)
Yeh that would be good buddy, a few pics of the underside of the bonnet and where the pins are located on the slam panel would be a help :thumb:
Are they Abw arches you have fitted ?? Yeah mate ABW |
Originally Posted by BoozyDave
(Post 11866996)
looks great :thumb:
What turbo are you running? GT30? what bhp are you hoping for? Set up came of a mates car he had 475/525 at 1.7bar on a 2.5 Quick Spec sheet of it EJ22 block block bored and faces skimmed Rear thrust conversion acl main bearings (race series) Mahle motorsport big end bearings ej257 heat treated crank 11 oil pump Crower rods Crower bolts Ceramic omega pistons New crank seals 14mm head stud conversion AS Performance twinscroll baffled sump* SPEC C Big port heads ported and polished Syvecs ecu Race technology dash ACT lightened Flywheel and paddle clutch Bosche 1000cc injectors CdF fuel rails Braided fuel lines 3 port boost solenoid* Spec c inlet manifold HDI GT2 FMIC with reverse inlet custom pipework* Electric power steering conversion* Full Custom manifold and Rotated Downpipe TOMEI Titanium 3 inch cat back statement* Borg Warner EFR 7064 twinscroll turbo K&N large cone filter Custom Nissan pulsar molded radiator Large 19row oil cooler Battery to boot relocation* Suspension and handling* Full space frame front end custom made D2 8Pots at the front Rear Brembos* 24mm Whiteline front adjustable arb* 24mm Whiteline rear adjustable arb Front Whiteline adjustable droplinks* Rear Whiteline adjustable droplinks* Spec c front arms custom caster mod and poly bushed Spec c rear arms poly bushed BC Coilovers with camber and caster plates Beatrush front strut brace Beatrush rear strut brace Beatrush rear boot H frame Beatrush rear passenger well braces Beatrush rear different support* Beatrush solid engine mounts Beatrush gearbox bushes and mounts Beatrush Dog bone* Braided fuel lines* Sparco Pro 2000 seats Takata harnesses Spec c carpet Spec c door cards Black rear seats Prodrive steering wheel boss kit Sparco suede detachable steering wheel Very Rare Prodrive boss kit XXR 530 18x9.75* AD08R 265/35/18 tyres |
Originally Posted by ZANY
(Post 11867025)
Monstrously sickkkk:thumb:
Cheers pal |
i despise the rear spoiler but the rest of the car is stunning good luck with remap bud
|
Originally Posted by RAGGY DOO
(Post 11867106)
i despise the rear spoiler but the rest of the car is stunning good luck with remap bud
Yeah think it's marmite.. looks alot better in person tbh goes well with the arches etc.. |
Do you have a side pic?
|
Originally Posted by AWG
(Post 11867342)
Do you have a side pic?
No mate sorry there cars were on the drive so couldn't get a side on |
If thats a quick spec sheet, what else is there????? :eek:
Originally Posted by Rbon91
(Post 11867089)
Quick Spec sheet of it EJ22 block block bored and faces skimmed Rear thrust conversion acl main bearings (race series) Mahle motorsport big end bearings ej257 heat treated crank 11 oil pump Crower rods Crower bolts Ceramic omega pistons New crank seals 14mm head stud conversion AS Performance twinscroll baffled sump* SPEC C Big port heads ported and polished Syvecs ecu Race technology dash ACT lightened Flywheel and paddle clutch Bosche 1000cc injectors CdF fuel rails Braided fuel lines 3 port boost solenoid* Spec c inlet manifold HDI GT2 FMIC with reverse inlet custom pipework* Electric power steering conversion* Full Custom manifold and Rotated Downpipe TOMEI Titanium 3 inch cat back statement* Borg Warner EFR 7064 twinscroll turbo K&N large cone filter Custom Nissan pulsar molded radiator Large 19row oil cooler Battery to boot relocation* Suspension and handling* Full space frame front end custom made D2 8Pots at the front Rear Brembos* 24mm Whiteline front adjustable arb* 24mm Whiteline rear adjustable arb Front Whiteline adjustable droplinks* Rear Whiteline adjustable droplinks* Spec c front arms custom caster mod and poly bushed Spec c rear arms poly bushed BC Coilovers with camber and caster plates Beatrush front strut brace Beatrush rear strut brace Beatrush rear boot H frame Beatrush rear passenger well braces Beatrush rear different support* Beatrush solid engine mounts Beatrush gearbox bushes and mounts Beatrush Dog bone* Braided fuel lines* Sparco Pro 2000 seats Takata harnesses Spec c carpet Spec c door cards Black rear seats Prodrive steering wheel boss kit Sparco suede detachable steering wheel Very Rare Prodrive boss kit XXR 530 18x9.75* AD08R 265/35/18 tyres |
Originally Posted by BoozyDave
(Post 11867889)
If thats a quick spec sheet, what else is there????? :eek:
Always something I miss lol |
Originally Posted by Rbon91
(Post 11867891)
Always something I miss lol
|
Originally Posted by BoozyDave
(Post 11867901)
lol :lol1:
|
Yeah really don't like rear spoiler. To mental doesn't fit with the car.
|
Originally Posted by hardcoreimpreza
(Post 11867904)
Yeah really don't like rear spoiler. To mental doesn't fit with the car.
Going to keep it on for a while see what I think of it go from there |
All times are GMT +1. The time now is 05:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands