6 speed prop to diff flange bolts size
Just fitting my 6 speed into classic
Long story short iv had bits for a while and only just started fitting Had a set of 10mm bolts in prop but diff bolt size is only 8mm??? I have 3 r180 diffs and they are all 8mm holes but 6 speed prop is 10mm Anyone had anything like this before Thinking of drilling diff to accept larger bolts as i dont like the idea of slop at flange but surely they were removed from same car so whats going on 😂😂 Properly comfused 😳 |
|
|
|
School boy error
I changed centre bearing Had second half of prop bolted the wrong way round Ftr Uj at centre is 10mm bolts Uj to diff is 8mm 🙄😳😂 |
Ding dong lol
|
Ordered some stub axles for fromt to make life easier to
The cv joints on the original stuff felt a bit **** so sticking with my type r fronts |
All times are GMT +1. The time now is 11:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands