ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Subaru Parts (https://www.scoobynet.com/subaru-parts-451/)
-   -   2.1 stroker engine, AVCS heads, cosworth (https://www.scoobynet.com/subaru-parts-451/1039803-2-1-stroker-engine-avcs-heads-cosworth.html)

dannyeg 01 July 2016 05:22 PM

2.1 stroker engine, AVCS heads, cosworth
 
2.1 stroker long engine with rcm headers built by slowboy racing a few years ago covered 15000k since build. Brought off here very recently but a chance has come up to buy a 2.35 from a friend so need this gone link to thread where I got it from so u can see it running £sold

https://www.scoobynet.com/full-cars-...ease-read.html

Have two sets of AVCS heads brought from same guy. I have since brought a set of Jdm heads so no longer needed. first set are version 8 guy said they would need an overhaul £sold plus paypal fees
Second set version 7 had £768 spent on them at engine tuner guy used them once for a track day had piston failure so said they would need a skim £sold

Brand new cosworth inlet manifold no longer needed http://www.cosworth.com/products/per...lds/manifolds/ £sold plus PayPal fees

2004 standard ecu £30 plus PayPal fees

Pro drive fuel rails for newage again no longer needed brought rcm ones
£100 plus PayPal fees

I have pictures of all of the above I can send on request unfortunately I still have no clue how to add photos to thread

Most items I would prefer pick up due to size and weight but could arrange delivery as I do work around a bit or courier at extra cost
thanks for looking

tweaks 01 July 2016 06:31 PM

I'll take the cossie inlet please pal.

Tim

bustaMOVEs 01 July 2016 06:58 PM


Originally Posted by tweaks (Post 11853629)
I'll take the cossie inlet please pal.

Tim

:D:thumb:

SmurfyBhoy 01 July 2016 08:46 PM


Originally Posted by dannyeg (Post 11853603)
2.1 stroker long engine with rcm headers built by slowboy racing a few years ago covered 15000k since build. Brought off here very recently but a chance has come up to buy a 2.35 from a friend so need this gone link to thread where I got it from so u can see it running £2500 plus paypal fees

https://www.scoobynet.com/full-cars-...ease-read.html

Have two sets of AVCS heads brought from same guy. I have since brought a set of Jdm heads so no longer needed. first set are version 8 guy said they would need an overhaul £100 plus paypal fees
Second set version 7 had £768 spent on the at engine tuner guy used them once for a track day had piston failure so said they would need a skim £400 plus PayPal fees

Brand new cosworth inlet manifold no longer needed http://www.cosworth.com/products/per...lds/manifolds/ £sold plus PayPal fees

2004 standard ecu £30 plus PayPal fees

Pro drive fuel rails for newage again no longer needed brought rcm ones
£100 plus PayPal fees

I have pictures of all of the above I can send on request unfortunately I still have no clue how to add photos to thread

Most items I would prefer pick up due to size and weight but could arrange delivery as I do work around a bit or courier at extra cost
thanks for looking

Will take ecu if its a uk car
Also does it have factory prodrive map ?

dannyeg 01 July 2016 09:00 PM


Originally Posted by SmurfyBhoy (Post 11853700)
Will take ecu if its a uk car
Also does it have factory prodrive map ?

It's come off a 2004/5 blob sti uk car don't know about pro drive map bud

TypeR99 01 July 2016 09:59 PM

will have IP and a 4 digit number written in black pen on the ecu if it has PPP

dannyeg 01 July 2016 10:35 PM


Originally Posted by TypeR99 (Post 11853778)
will have IP and a 4 digit number written in black pen on the ecu if it has PPP

Thank you. So no it's not ppp

A1AXX 04 July 2016 12:55 PM

110% vouch for this engine being a cracker. No noises, doesn't use or leak oil or fill coolant expansion tank, oil changed every few k with Titan pro s 10w50 with rcm filters. Actually only done about 100 mile since the last change. Holds really strong oil pressure

dannyeg 04 July 2016 07:35 PM


Originally Posted by A1AXX (Post 11854771)
110% vouch for this engine being a cracker. No noises, doesn't use or leak oil or fill coolant expansion tank, oil changed every few k with Titan pro s 10w50 with rcm filters. Actually only done about 100 mile since the last change. Holds really strong oil pressure

Thanks mate. This other engine would have to come up after I brought this off u

popeye540 09 July 2016 05:55 AM


Originally Posted by dannyeg (Post 11855007)
Thanks mate. This other engine would have to come up after I brought this off u

Top chap can't wait to get it fitted thanks again

dannyeg 16 July 2016 08:14 PM

Up

SmurfyBhoy 25 July 2016 10:30 PM


Originally Posted by dannyeg (Post 11853603)
2.1 stroker long engine with rcm headers built by slowboy racing a few years ago covered 15000k since build. Brought off here very recently but a chance has come up to buy a 2.35 from a friend so need this gone link to thread where I got it from so u can see it running £sold

https://www.scoobynet.com/full-cars-...ease-read.html

Have two sets of AVCS heads brought from same guy. I have since brought a set of Jdm heads so no longer needed. first set are version 8 guy said they would need an overhaul £100 plus paypal fees
Second set version 7 had £768 spent on them at engine tuner guy used them once for a track day had piston failure so said they would need a skim £400 plus PayPal

What work got done to the heads at engine tuner ?

dannyeg 29 July 2016 07:25 PM


Originally Posted by SmurfyBhoy (Post 11861758)
What work got done to the heads at engine tuner ?

Unfortunately I've no receipt of works guy said they've had new everything I can send u pictures they look brand new


All times are GMT +1. The time now is 04:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands