Hawkeye bumper(slits)
 

Subaru guru's help required, what are the 2 slits either side of the number plate? Some hawks have it and some don't. Any ideas? 2 friends have hawk spec C's one blue one white and the blue one has the slits.:confused:

https://cimg9.ibsrv.net/gimg/www.sco...f65916ef2d.jpg

thought it was for brake cooling diverting some air over the front discs. :wonder:

Impossible to vent brakes from that location
If anything , extra flow for air con & pas cooler /

But more than likely just a cosmetic re- touch

They make it go much faster!

It could be UK spec thing to cool the hg

Is one an MY06 and the other an 07, as there are a couple of subtle differences between the two, rear lights being one and steering wheel being another

My MY06 has them.

Pretty sure all Hawks are MY06 regardless , the latter ones having a few re- touches but still
Chassis MY06-/ MY07 are the first Hatches
Quote me if I'm mistaken chaps !!

My Hawk is a 55 plate, does that make it a MY05 car?

UK car and has the slits

could be :thumb: Unfortunately dont have my MY06 anymore and for some reason didn't take a picture under there :D

However, for homologation may have been necessary to fit to road car .

https://cimg9.ibsrv.net/gimg/www.sco...9a08ada257.png

what is it doing in this application?

http://www.s22b.net/impreza/wrc/06/foto/max/4.jpg

In that application it's induction wich channels ( kind of like a hood extractor ) direct into the front mount intercooler wich sits on top of the engine at the tip of the bonnet .

No captain jack , your car is MY06, , first Hawks came in on 55's

In reply to both MY (Model Year) is determined by the 10th character of the VIN and has NOTHING to do with the year of registration.

The Hawk comes in MY06 and MY07,(and MY08 for the Middle East - destination code KS and Israel E2)

http://clarkdh.net23.net/NTL/G11%20model%20year.JPG

the Hatch arrived in late 2007 as MY08.

Thanks for that Don
Yea I know it has nothing to do with first registration date as my Hawk is first registered in Feb 2009 / as that would make it MY09

Mine is a MY06 and has the slits, I dont believe they go anywhere, that said its a spec D

My MY06 Spec C has them

Also anyone know what the bottom side vents are for on the hawk, brake cooling ??

My 2007 non turbo hawk that was imported from south malta originally has them too. Could it not just be a prefacelift - facelift differance?

This might sound daft , but I'm swaying more now on the thinking its to limit number plate vibration ( reverb ) against the bumper itself causing chatter noise at speed / stock number plates are quiet long & def flex right at those points .. This would cause the trapped air to filter on through reducing the reverb :)

I suspect you're over-thinking it somewhat. :D

Lol