Blobeye headlight intake
 

Had a spare headlight so thought I would try the intake mod
I used a 3" duct and 6" trumpet which I trimmed to suit the shape of the blob light.
Pictures speak for themselves

https://cimg2.ibsrv.net/gimg/www.sco...baaf538cc.jpeg


https://cimg3.ibsrv.net/gimg/www.sco...eb46f9ee9.jpeg


https://cimg4.ibsrv.net/gimg/www.sco...4947d0720.jpeg


https://cimg7.ibsrv.net/gimg/www.sco...f4f45d8c7.jpeg


https://cimg8.ibsrv.net/gimg/www.sco...6881f0d95.jpeg


https://cimg9.ibsrv.net/gimg/www.sco...b3074f262.jpeg


https://cimg0.ibsrv.net/gimg/www.sco...ee1e7acfc2.png

By the way if any of you are thinking about doing this mod , small inlet looks wrong see pic
https://cimg4.ibsrv.net/gimg/www.sco...9d7a4d2f5.jpeg

i assume for mot you would have to swap them out in order to pass?

Yeh need to keep original headlight for mot time

What if you had a bi-xenon in where your dipped is? Wouldn't need to swap out then surely?

I guess if u fit bi-xenon there's no reason why it shudnt pass mot as u would have low and high beam

Really long shot on this but where did you find the trumpet? I can't find a 6in one anywhere 😫

Looks like he hasn't been on for a while.

In a different thread I saw people mention they used a subwoofer trumpet. Quick google search and you can get the size you are after. Disclaimer though make sure your lights work so you can see and others can see you. Don't want people thinking you are a motorbike and realise too late.

Nice one thank you. I did have a think about that too, was considering Led bulbs for mine, might look at using the trumpet with a wrx fog trim instead as it's the same size and won't require the loss of my main beam.