Version 2 STI Type RA
The car belonged to a very good friend of mine who passed away a few years ago, since then it has been used by his elderly uncle who just used to potter about until the bottom end started knocking a couple of months ago.....Since then it was been stood up until it was trailered to my house a few nights ago. The car still runs and still has a current MOT until October but would obviously need to be taken away on a trailer.
There are no serious modifications on the car, just a HKS exhaust with a decat, a DV, a crappy aftermarket air filter and what looks like a set of lowered springs. Inside is stock apart from a Momo race wheel, a couple of gauges, a Kenwood headunit and some parcel shelf speakers.......It does have some Subaru 4 pots upfront which is a nice upgrade over the standard sliding calipers. The body....The O/S rear arch is showing a small scab which looks like its were the paint has been broken yet the N/S looks fine. The rest of the car looks pretty straight but obviously it is 15 years old!.....It is pretty dirty where is't been sat for a while. The car is being sold as a project so please bear this in mind, it's not being a sold as a minter. I've not driven the car because of the engine condition so anyone who views the car can carry out their own full inspection. The price - I'm basing this not only on current prices of Classic Impreza's but sort after Classic Impreza's like the STI RA...For that reason the price is £2.5k firm which makes it probably the cheapest V2 STI RA in the country at present even with the bottom end issue. If it doesn't sell at that price I fully intend to tuck it away and sit on it for while until prices climb even more. These are the only photos I have at present. I did intend to clean it before advertising but the weather doesn't look great over the Easter weekend so I'll go with these for the time being. https://cimg9.ibsrv.net/gimg/www.sco...ecb2ab3c22.jpg https://cimg0.ibsrv.net/gimg/www.sco...f3027751a2.jpg https://cimg1.ibsrv.net/gimg/www.sco...6ba302bc0d.jpg https://cimg3.ibsrv.net/gimg/www.sco...f577676ffc.jpg https://cimg4.ibsrv.net/gimg/www.sco...6182b1b084.jpg https://cimg5.ibsrv.net/gimg/www.sco...c999c02cee.jpg |
Do you know what the mileage is on the car, also what history?
I'm after an sti type ra for a full restoration |
The mileometer is showing 88706 which I believe to be still in KM's, it hasn't been converted. The only paper work I have is the V5 and 5 old MOT's, although I do have here two keys and two alarm fobs.
Looking at the old MOT's, it has covered roughly 18000 km's since 2010 and has had 3 owners in this country. |
Ok thanks, any idea how good/bad the underneath is in regards to rust?
|
I've not been under it but going by the rest of the car and the rear arches I'd say that was a good sign.
There are no advisories on any of the old MOT's for corrosion. The only advisories in the last 5 years have been. Play in front drop links Low front brake pads Front tyre near the legal limit. |
Where are you based, very interested
|
Originally Posted by cookstar
(Post 11813149)
Where are you based, very interested
|
Originally Posted by jayallen
(Post 11813121)
I've not been under it but going by the rest of the car and the rear arches I'd say that was a good sign.
There are no advisories on any of the old MOT's for corrosion. The only advisories in the last 5 years have been. Play in front drop links Low front brake pads Front tyre near the legal limit. |
Originally Posted by The Pink Ninja
(Post 11813154)
Hes down Bournemouth way...too far for me :lol1:
|
Originally Posted by jayallen
(Post 11813172)
There is someone currently on their way down from Nottingham Gaz..:thumb:
|
Originally Posted by chrispy200+
(Post 11813182)
Arse, I'll assume it's sold then
|
Did it sell?
|
Yes it did sell, I didn't update last night because I was waiting for the funds to clear into my account this morning.
It was sold to a retired Policeman who intends to restore it..:thumb: |
Originally Posted by jayallen
(Post 11813172)
There is someone currently on their way down from Nottingham Gaz..:thumb:
Yeah but Nottingham is 3 hours away from me...ill get one one day lol |
If it didn't sell then I'd have been very surprised and there must have been something more up.
Pity, sounded just what I was looking for |
Wish I'd seen this sooner
|
Got one in bits...with lots of special bits.. Offers...
|
Originally Posted by 500
(Post 11813733)
Got one in bits...with lots of special bits.. Offers...
|
Send them to me too
|
1995 STI RA
2.5ODB (and 2.0CDB) 2.5 Crank Wossner Pistons uprated rods acl bolts and bearings reverse inlet and standard lateral intercooler + rad GT3542 .82 headers and wastegate to suit exhaust to suit Prodrive sparco Carbon seats, 1 is Rob Reid's seat Tein and whiteline suspension very light wheels carbon bonnet multiple heads and cams lots of spares gauges pods bolt in 6 point Fuel pump hydro handbrake kill switches and prob more Ive forgotten |
Originally Posted by 500
(Post 11813874)
1995 STI RA
2.5ODB (and 2.0CDB) 2.5 Crank Wossner Pistons uprated rods acl bolts and bearings reverse inlet and standard lateral intercooler + rad GT3542 .82 headers and wastegate to suit exhaust to suit Prodrive sparco Carbon seats, 1 is Rob Reid's seat Tein and whiteline suspension very light wheels carbon bonnet multiple heads and cams lots of spares gauges pods bolt in 6 point Fuel pump hydro handbrake kill switches and prob more Ive forgotten |
Originally Posted by The Pink Ninja
(Post 11813888)
How much for seats? :D
:lol1::lol1: |
Originally Posted by 500
(Post 11813874)
1995 STI RA
2.5ODB (and 2.0CDB) 2.5 Crank Wossner Pistons uprated rods acl bolts and bearings reverse inlet and standard lateral intercooler + rad GT3542 .82 headers and wastegate to suit exhaust to suit Prodrive sparco Carbon seats, 1 is Rob Reid's seat Tein and whiteline suspension very light wheels carbon bonnet multiple heads and cams lots of spares gauges pods bolt in 6 point Fuel pump hydro handbrake kill switches and prob more Ive forgotten |
For those lookinfg for a complete STI RA.... http://www.ebay.co.uk/itm/subaru-Imp...EAAOSwZQxW6FCw
|
Originally Posted by jayallen
(Post 11813893)
|
Originally Posted by 500
(Post 11813874)
1995 STI RA
2.5ODB (and 2.0CDB) 2.5 Crank Wossner Pistons uprated rods acl bolts and bearings reverse inlet and standard lateral intercooler + rad GT3542 .82 headers and wastegate to suit exhaust to suit Prodrive sparco Carbon seats, 1 is Rob Reid's seat Tein and whiteline suspension very light wheels carbon bonnet multiple heads and cams lots of spares gauges pods bolt in 6 point Fuel pump hydro handbrake kill switches and prob more Ive forgotten Has anything irreversible been done to the car to stop it going back to factory? |
Picture a bare shell. Nothing is irriversible. Scooby clinic have put an inner wing in due to it being cut previously, I think the jap rear plate holder is no longer attached to the bodyshell.
It also has 99> bumpers, lights, grill. mileage is about 60k, Has been off the road for 10 years, and I will not split it, if it doesnt all go, it'll get built, maybe in another 10 years :lol1: Edited to say that I don't have much in the way of history |
Price for the car and all the bits then pls
|
Originally Posted by 500
(Post 11813924)
Picture a bare shell. Nothing is irriversible. Scooby clinic have put an inner wing in due to it being cut previously, I think the jap rear plate holder is no longer attached to the bodyshell.
It also has 99> bumpers, lights, grill. mileage is about 60k, Has been off the road for 10 years, and I will not split it, if it doesnt all go, it'll get built, maybe in another 10 years :lol1: Edited to say that I don't have much in the way of history |
Originally Posted by jayallen
(Post 11813910)
For those lookinfg for a complete STI RA.... http://www.ebay.co.uk/itm/subaru-Imp...EAAOSwZQxW6FCw
|
All times are GMT +1. The time now is 05:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands