V3 Rotated inlet manifold
 

V3 Rotated inlet manifold (crinkle red, could do with touch up), excellent condition.

It has been cut and welded to clear the bonnet.

Comes with throttle body, iacv, and centre coil, all in working condition and supported over 500hp.

£275 buyer to cover fees and arrange their own courier.

take it this won't fit a V4?

Yes it will as far as I am aware. It is phase 1.5 same as v4. Ph2 is v5 on.

Yes fit V3 or V4

Has this been modified or just rotated

Modified how Arch?

Well when we mean modified cut the centre of the inlet rotate and weld back in place . When you mean rotated have you just lifted it rotated it put it back down or is there more to it .

To me the location of the ICV suggests it's a standard phase 1.5 manifold that has been turned round.

The Inlet has been cut and welded to angle the throttle body level to clear the bonnet etc....

:thumb:

If it was left at the original angle it would foul the bonnet, so you can see when looking inside where the cut and weld was made on the throttle body flanges.

Obviously it is pointless supplying pipework with it as unless running the sam eintercooler and turbo set up as me it wont fit anyway.

BUMP

Bump this up!

This has been cut and welded to make sure no fouling of pipework on the bonnet etc!

Injectors included are perfect for 500+ builds or can be split if I find a buyer for the manifold....

Would possibly be interested in the throttle body to intercooler pipe, J. Might help me get my arse in gear and get my spare PH1 manifold converted.

No pipework included as my intercooler is rotated and flipped too so it wouldn't fit with anyone else's core etc!

It is only 70quod or so to get the pipe made up, stop been so stingy and get it sorted 😃

:D I'm Northern, it's my birthright to be tight. :thumb: :lol1:

No bother mate. :)

You're not Northen u less you are a fellow Leeds united follower and have gravy on your chips.....

I could include it as I'm currently running the regular manifold off a v5 and have no need for it but to be honest it's no use to anyone else!

Leeds is South of me! :D Also I'm of a Black and White persuasion.

It's ok mate, I might have a plan. :norty:

Gravy on chips and a pint is not a plan.....

Id jump ship and start supporting the mighty Leeds they are having better fortunes than those bunch! Just.

No chance, mate. I'm on a lifetime sentence of sufference. :)

Need to speak to one of my friends, he'll be able to weld something for me. If I ask nicely and supply him beer by the gallon afterwards most likely.

Well get on it then ☺let me know how you get on....

Would swap for some 5x114 alloys with some track compound ns2r or similar? Standard or after market are fine

Also need a 4 door shell low milage, jdm only in black.

Be a while before I see him, he lives in Leeds. :lol1:

Best city on earth that...

Anyone for swap or splitting? Offers accepted.

As discussed in pm's with you a few days ago I'd like the injectors, but only if its not too much hassle to split and they'd bolt on to a v4.

Would be fine on a v4.

If i am going to split I'd like a buyer for both first but that's no issue...

Hmmm I'm not northern , don't have t'gravy on chips but the mighty LEEDS are my passion ;) .
Ooops sorry for the hijack but had to be said .

that's fine with me. if you get a buyer for the whole thing sell it by all means, but if you get it for separate parts pm me and I'll take the injectors.
cheers,


Ash

Well I will allow the gravy on the chips to slide this time.... :thumb: