2004 sti type uk 600bhp sti breaking
 

will start breaking full car at the weekend all parts available

https://cimg3.ibsrv.net/gimg/www.sco...ce30737d66.jpg




Part description
Syvecs S6 PNP + Cal switch sold

ID 1000 injectors and fuel rails (Injectors flow checked and filters fitted 200miles) sold

RCM return to sump catch can with pipework - powercoated black sold

RCM rotated kit £800

Tial 44mm waste gate sold
Tial 44mm waste gate £150

RCM headers sold

RCM 3" Race exhaust with centre box £350

Non DCCD gear box +reardiff + gear linkage + shafts + hubs(40000miles) £1800

Excedy Hyper twin plate clutch with new plates (200miles) £750

F & R Brembo 4 pot brakes (needs front discs) £450

EXC-TC coilover with spring assisters (4000 miles) £600

EXC-TC pillow ball top mounts (4000 miles) £300

4 bar map sensor sold

Wide band Lambda with loom for syvecs s6 PnP £130

Garret GT3582R Turbo (4000 miles)no play £1000

Sti rear diff £200

newly refurbed OZ 18" wheels fitted with Toyo R1R 225/18 tyres (200miles) £1000

Sti interior seats and door cards £300

APS DR725 intercooler and powder coated pipework sold

5 x Greddy gauges 60mm + controller + gauge Pod + modified heater
vents+ looms + Sensors ( exhaust sensor missing but loom available)Oil P + T, Fuel P, Boost, Exh temp £500

Greddy turbo timer + loom £40

Hyper flow in tank anti surge system(like spec C) and walbro 255 pump complete £150

detangoed head lights £150

drivers wing £150

sti front bumper cut for front mount sold

v limited splitter £80

prodrive flaps £80

bonnet with scoop and bonnet pins sold

side skirts £80

rear lights £80

rear bumper £80

rear spoiler sold

Paul Finch - EJ2.5 closed deck,14mm studs, Modified oil pump,crower 1000 bhp rods,Mahle pistons,acl,cossy cams, cossy heads, solid lifters- Running in miles only

Bottom end:
EJ257 ReBuilt by Paul Finch (Finch Motorsport)with below – 300 miles only
Engine was soda blasted and is built, as all of Paul’s work, to a high standard
STD Ej257 Crank – Polished by Paul
New ACL race bearings
New Lateral/Crower 1000bhp rods – Mark at lateral
Closed deck block conversion – Ayln As performance
14mm Studs – Ayln As performance
New Mahle 2618 99.75mm – Bores honed to suit by Paul Finch
New Cosworth 1.1mm Gaskets
New 11mm Oil pump with modded PRV – Paul Finch
RCM Baffled sump (300miles)
Heads:
Ej257 Cosworth CNC ported Big Valve cylinder heads – rev rating (max 10,500rpm)
http://shop.tdi-plc.com/catalog/cosw...5-p-11692.html
Cosworth CNC ported cylinder heads feature dyno tested and flow bench proven ports, engineered for maximum usable power.
Intake 14.63% (average) 22% (max) increased flow (Cosworth figures)
Exhaust 30.56%(average) 41% (max) increased flow (Cosworth figures)
+1mm Stainless Steel Intake Valves (1800 degrees max.)
+1mm Inconel Exhaust Valves (2400 degrees max.)
4-angle Inlet Valve job
3-angle & radius Exhaust Valve job
Cosworth valve springs with titanium retainers
Hardened spring steel platforms
Cosworth solid lifters.
Cosworth billet cam sensor bracket
Cams:
Cosworth EJ25 Part No 3930
http://www.cosworth.com/products/per...rts/camshafts/
Int."278" deg. 10.7mm lift / Exh. "274" deg. 10.mm lift
Complete long assembly soda blasted, cleaned , inspected, detailed and rebuild by Paul Finch 300 miles ago.
Ancillaries and all new timing gear fitted by me.
£7800


https://cimg4.ibsrv.net/gimg/www.sco...d8f2e9c779.jpg


https://cimg5.ibsrv.net/gimg/www.sco...103d7b44a2.jpg


https://cimg6.ibsrv.net/gimg/www.sco...73fb67cc3c.jpg

Pm'd

Pm'd

PM sent

Pmd

Hi,
have you still got the plastic under panels? I'm after the long under panel on the passenger side.
Thanks!

How much for the whole car?:P

Hi mate I've pmd you could I have the syvecs ecu please

ECU is sold to me :)

What size is that overflow tank, and how much for it,

You have pm regarding front bumper. Steve.

No price on the heads?

Might be a silly question but :wonder:Would they fit a ej20 bottom end??

Yes they would fit, £3500 for the heads and cams

Danny
 

Hi can you tell me if the s6syvecs will go on my bug eye and what else I would need to fit it cheers if it fits and still available I'll have it

still have the gearbox????

Yes gearbox is still available

Is the rotated kit sold if so would you give me a shout please

Hi mate could you pm back please. Thanks

They'd fit but wouldn't work very well;)

the rcm headers, are they equal length or un equal?

You still got the winglets mate?

can i have rcm oil catch can please

there sold sorry

there sold

its sold

there sold

Turbo timer still available?

yes turbo timer is still available

Ecu received today top man :thumb:

3port solenoid & Map sensor arrived today

Top Guy