Destroyed front splitter ride height or ground level?
Didn't think my coilover ride height was set too low, however the car park I used today had a steepish ramp as I attempted it "crack" front splitter destroyed. Is it just me or is the distance from front wheels to very front of the splitter on a hawkeye quite long? Anyone else have issues? At stance I have as good as an inch over tyre height on the front ?
|
height or ground level?
BOTH |
I'm 3 and counting.... :lol1:
|
2 Attachment(s)
Last year I got through a fair few, it really struggles with multi storey car parks,
These one was from a collision with a rabbit! Attachment 37861 And this one was due to using the self tapping screws provided! They pulled out at high speed and it folded itself under the car! Attachment 37862 New one is safely secured with bolts, washers and nuts!! |
It's the exact reason why I won't put one on mine can't make my mind up but all the horror stories and my own being on coilovers it does do my head in as I know it'll look better with one on very confusing indeed:wonder:
|
Done the same yesterday to my annoyance twice!!! Thinking of taking it off as raising the ride height isn't an option right now..
Martin |
Just sell it to me if there's anything left of it :lol1:
|
Sorry to go a it off topic which suspension set up is better on theses widetrack the coilovers being tein ones on mine or std sti ones?
|
Ohlins but they are about £1800, you can get BC BR's or Meister R's for half the price but you get what you pay for ;)
|
Lol I'll take it off when the weather gets better mate you can have a look
Zany I've got bilstein b14's find them perfect not too harsh at all and the quality is good too... Around £1300 Martin |
I run hks hypermax 4 they are abit harsh on bad roads but epic elsewhere. Maybe time to raise height this splitter killing gets expensive lol
|
Originally Posted by M2RTXhawkeye
(Post 11793608)
Lol I'll take it off when the weather gets better mate you can have a look
Zany I've got bilstein b14's find them perfect not too harsh at all and the quality is good too... Around £1300 Martin SY: let us know how you get on after adjustment of ride height as the splitters do finish the front ends of nicely I reckon I would have had1 on if mine wasn't so low best of luck pal:thumb: |
Originally Posted by The Pink Ninja
(Post 11793475)
I'm 3 and counting.... :lol1:
Current is a Chargespeed Bottomline, so I literally crawl everywhere that I think I may hit something :lol: |
I did 2 on a set of AST's...and done a carbon one on this as its even lower !!
|
My new splitter arrived big difference from the old one. once fitted I will work on the coilover hight and feed back.
http://i926.photobucket.com/albums/a...10782B3CB9.jpg |
Looks a lot more solid is it one off kas?
|
Originally Posted by ZANY
(Post 11799767)
Looks a lot more solid is it one off kas?
|
Dont ever go on Four Ashes pub car park Sy, I couldn't get off the car park in my hawk with splitter, Ripped it clean off there and then. Just thought id pre warn you as there/where plenty of Subaru meets over the years at that pub.:thumb:
|
Originally Posted by The Pink Ninja
(Post 11793598)
Ohlins but they are about £1800, you can get BC BR's or Meister R's for half the price but you get what you pay for ;)
|
Mine has lasted for years now. Just ensure it's flexible plastic and BOLTED on not using the self tappers as mentioned. Use big penny washers too. Been bent, scratched, knocked, etc over and over again. Have resprayed it a few times too with Hellfrauds satin black. Still looks like new~! :)
|
Just to give feed back on ride hight I currently have the car set to the hks test settings which has raised the car by about 10mm and added a tiny amount of front preload. Car feels great and will be better once geo redone I'm sure, only neg is car looks high as running 17" wheels but splitter clearance greatly improved.
|
Originally Posted by nikon-man
(Post 11800532)
so why do you say Ohlins are better than BC BR's or Meister R's ???
Ohlins are far more expensive for a reason.. |
Originally Posted by InTurbo
(Post 11793536)
Last year I got through a fair few, it really struggles with multi storey car parks,
These one was from a collision with a rabbit! http://i1308.photobucket.com/albums/...pswrjxs7md.jpg And this one was due to using the self tapping screws provided! They pulled out at high speed and it folded itself under the car! http://i1308.photobucket.com/albums/...psh1fixoit.jpg New one is safely secured with bolts, washers and nuts!! |
Originally Posted by sy.
(Post 11802768)
Just to give feed back on ride hight I currently have the car set to the hks test settings which has raised the car by about 10mm and added a tiny amount of front preload. Car feels great and will be better once geo redone I'm sure, only neg is car looks high as running 17" wheels but splitter clearance greatly improved.
|
|
That's still low bro nice car:thumb: I might just put it back on list as mines bout as low as yours keep us updated thx
|
Originally Posted by 2pot
(Post 11802790)
Omitting the rabbit, were the splitter incidents with your Bilsteins and rb320 springs?
All the splitters I've had are the flexible ones you can bend in half but the rabbit still shattered it. Was traveling fairly fast tho! :lol1: |
Originally Posted by ZANY
(Post 11803207)
That's still low bro nice car:thumb: I might just put it back on list as mines bout as low as yours keep us updated thx
|
Right I need to brush up on my maths lol as I've edited above as was wrong so 225/45/17 is roughly 238mm from centre of wheel to the ground 225/40/18 is 248mm a difference of 10mm.
|
Not correct according to this calculator below....
This indicates there will only be 1.5mm difference in ride height. https://cimg6.ibsrv.net/gimg/www.sco...6fa5bc5173.jpg |
All times are GMT +1. The time now is 05:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands