Where's my dash sweep ?
Hey yall
I have a 2002 sti prodrive and noticed the other day there's no dash sweep on ignition !! Could it somehow be turned off or a fuse blown ? Any help will be appreciated |
are they meant too on a bug?my jdm bug did not have that feature.
|
nope, thats why you dont have it.
|
Try this it couldn't hurt:
Originally Posted by Suberman
(Post 9809655)
Ok fellas, the verdict is out. Spec Cs do not come with the sweep function from the factory, only the JDM STIs do. I managed to get the information on the 'sequential startup function' from the JDM owners' manual translated. :)
http://i1022.photobucket.com/albums/...nersmanual.jpg Heres what it says: Initializing the Indicating needle For red luminescent and white luminescent, upon turning the engine switch to "On", all 4 meter indicating needles will indicate the maximum and then immediately return. (excluding STI spec C) Setting Method STI indicating needle can be set or deactivated using the method below. 1. When the engine switch is at "ON", and REV Indicator Setting Knob is turned either to the right or left, setting or deactivating can be done by pushing the Trip Switch/Trip Meter Reset Knob. When this is done, the buzzer will sound and the external temperature display will change to the initial start-up display. The initial start-up mark and "ON", or "--" will be displayed. Although the above information is taken from the owners' manual for the MY06-07 hawkeye JDM GDB STI. I believe the sweep function was not included in the earlier Spec Cs as well (MY03-05) :wonder: as confirmed by CannonFodder and TX. So i guess the Spec Cs that have the sweep function were programmed in from new by the supplier (as confirmed possible by Robocop and Shaun) or was done by a previous owner. :) |
Isn't the prodrive version just a body mod version sti? wont have dash sweep
|
https://www.scoobynet.com/private-fo...-prodrive.html
the dash in that one doesnt sweep so yours wont either, |
Originally Posted by Tidgy
(Post 11788449)
Isn't the prodrive version just a body mod version sti? wont have dash sweep
|
Cheers everyone for your help , just going to have to bare with no sweep , best looking model by far anyway
|
There was a japanese prodrive version and then there is uk cars with prodrive packs which are sometimes mistakenly advertised as prodrive versions.
|
you can fit the sweep clocks from a newer model, its plug and play i believe.
|
Originally Posted by wrxmargy
(Post 11788525)
Cheers everyone for your help , just going to have to bare with no sweep , best looking model by far anyway
http://www.type-ra.com/impreza-timeline-gd-gg/ Any pictures of your car? |
Originally Posted by wrxmargy
(Post 11788525)
Cheers everyone for your help , just going to have to bare with no sweep ���� , best looking model by far anyway ��
|
Originally Posted by The Trooper 1815
(Post 11788607)
The JDM Prodrive Style STI as an Applied Model code - GDBB4KH and came with a roof vent and rear wiper. The UK STi Prodrive did not.
http://www.type-ra.com/impreza-timeline-gd-gg/ Any pictures of your car? https://cimg4.ibsrv.net/gimg/www.sco...499d6f3510.jpg https://cimg8.ibsrv.net/gimg/www.sco...0d4ece1a78.jpg Not the greatest pics but haven't had a nice day since u got it for polish and photos ☺ |
Uk car, wont have it.
As for the newer JDM Spec C, both my 17 inch (owned from new) and Spec C ltd (both my03) had sweeping dials from the factory :) |
Originally Posted by TonyBurns
(Post 11790867)
Uk car, wont have it.
As for the newer JDM Spec C, both my 17 inch (owned from new) and Spec C ltd (both my03) had sweeping dials from the factory :) |
http://www.type-ra.com/subaru-forum/...el-code.13265/
http://www.spec-c.com/what-model-is-my-impreza/ Confused......................you will be :thumb: |
All times are GMT +1. The time now is 02:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands