Cool bug, miss mine tbh!

Heres the new wheels

Attachment 39174

Need new centre caps, but drives so much better on thinner wheels,

Just need to get the brake pedal better and im fairly happy

Ps flocked dashes are so hard to keep clean

Looks so much better Jake :thumb:

Martin

much better, and yes if you hoover the dash you will loose bits of it. I used either a damp cloth or a soft brush just to go over it

Great choice of wheel mate looks grate

I would like a splitter, but i cant find anything

Got one here Jake off my old prodrive bumper, has a small crack though not sure if it's noticeable come and collect it for free if you want

Martin

Really, thats ace bud. Ill take you up on that offer.

Cheers pal

Well picked the splitter up off martin tonight, top bloke with a stunning car

Thanks Jake :thumb:

Hopefully it's ok let us know when you've checked and fitted it mate :thumb:

Martin

Yeah deffo

On the hunt for a roof flap

http://www.ebay.co.uk/ulk/itm/281632772285

Martin

Well bit of an update over Christmas.

Ive sold the plate off the car to the original owner, this has allowed me to buy a roof flap,

Next up i found out that the discs are now warped on the d2's so they have gone and been replaced with brembo calipers and discs,

With it being my birthday 1st of jan, i asked for money.

With that i got a jdm grille, some hella horns and a pink badge haha

nice mate cant wait to see it in the flesh again. I'm sure the original owner will be very happy to get his plate back ;)

And my other white scoobs

Attachment 39007
Attachment 39008
Attachment 39009

Jake

My revolution milleniums would look nice on it if you want swap xxrs

Bit late there bud, already gone

Always same lol

I want revs for my blob sti.

Norton send me a pm.

Pm sent mate lol

Very nice bug that :thumb:

Well the car is back on the xxr.

Turns out the rota gra i swapped for were inovit tarmacs, got back in touch with the guy a d swapped back.

Having to run a small 3mm spacer to clear the new brembos, as these wheels are a smaller offset.

Plus side the brembo are now black

Preferred the XXRs tbh, think they suit the car better. Now stop messing with your car and get my grills painted ;)

need to try them on first lol

Maybe you should re-spray the XXR's a different colour. If only you knew a sprayer! :)

Got a shed load done on the car today.

Fitting of a spec c roof flap

Now alot of people use frayz guide, which is great. But there is one piece of miss information.

Once your lining is down, he says to remove this part.

*Attachment 38935

But infact the bracket for the roof vent uses this for centring and strength.

*http://i5.photobucket.com/albums/y19...psq4bec83d.jpg

See how the screws that held the map lights in, now hold the frame, after this you can bolt the other two holes

*Attachment 38936

Then you cam centre punch all your holes and get the drill out.

*Attachment 38937


*Attachment 38938

Dopily i forgot pics for the hole!!!

But the rest is per guide,

The inside

*Attachment 38939

And out.

*Attachment 38940

Next thing was to remove the old grille to fit my hella horns, and jdm grille.

Also took the bit kf dash our were then flock had flacked amd blacked that.

After that i took the gear knob off, cut the leaver down by about an inch and installed a new knob

*Attachment 38941

Final pics

*Attachment 38942

*http://i5.photobucket.com/albums/y19...psazdv5lxc.jpg

Jake

Look loads better now mate :thumb: forgot the update on the splitter or have I missed that :wonder: :lol1:

Martin

Looks perfect

Spot on is that


Mick