Turbo for 2.5l / ver4 Heads
 

Hi,

I need a stock location Turbo, inlet pipe should fit under ver4 intake manifold.
Looking for around 450hp on 98oct.
Block is Closed deck, forged Pistons/Rods and 14mm Head studs.
Would like to stay on stock Headers but uppipe can be changed.

Best regards from Germany
:thumb:

SC46 from scoobyclinic

+1 for sc46

I've got a stock location owen developments GT30R made 440 bhp @1.6bar bearing cartridge

Thank you for your fast response :thumb:

Or precision turbo 450-500 comfortably

46 is a good option, tried and tested