2.5 engine failure
Hi guys looking for some advise on what to do next. My car is currently with api and after 12 weeks of it being there ive finally got a quote for the work that needs doing, cutting a long story short, it a 2.5 wrx hawk, dredded Ringland failure and crack, also needs replacement block and been quoted £6300!! I'm sure it's worth doing but to be frank ive only got 4k set aside. I paid 3900 for the wrx with 90k on the clock which with limited knowledge at the time wasn't aware of the unreliable 2.5 engine. I'm really not sure which way to go weather to try and see what can be sorted with api or get a second hand lump and put in? Locally ive seen a spec d lump from a hawk for 2k (not sure of milage) so not sure if this is an option or will a 2l sti lump go in? Sorry for multiple questions but my knowledge is slowly building of impreza's but having only owned my first one for a few months to have this issue is a bit of a kick in the balls lol!!
|
If the block is scrap it's not gonna be a cheap build mate so about the right sort of figure :( (just had my type r 2.5'd so know the costs)
you had some prices for other options? |
Second hand engine.
6 k on a wrx is madness. I'd go for a 2.0 sti engine if it's going to be second hand The spec d had the same poo.5 as the wrx |
What you first need to think of is, what will the car be used for, what power goal to do have in mind then budget. then work with that
|
£6300? Are they taking the piss?
|
Spend the 4K on a new car then try and recoup some money from your broken wrx,
I couldn't spend over 6k on a car that worth nearly half that... |
Originally Posted by jayallen
(Post 11746823)
£6300? Are they taking the piss?
when most of the engine is junk it soon adds up |
I would Drop a 2nd hand 2.0 sti engine in it, I'm sure mattyb has one for sale
|
It's something to do with a 2.0l oil sump has been fitted which has stuffed the crank and damaged the block. But yeah I don't agree with spending that money on a wrx lol!! Was tempted with a 2.0 sti lump but wasn't too sure if it will fit the 5 speed box and other parts as it's a 2.5 coming out (sorry for lack of knowledge) lol
|
2.0 lump will bolt up to your gearbox fine.
|
Think I'll be having a word with api and see what they suggest as the engine is in bits weather they can source a 2l sti lump
|
There a couple engines for sale in the breakers section mate
|
I'd speak to these guys...
http://pages.ebay.com/link/?nav=item.view&id=370798260799&alt=web Good luck |
As above I'd go for a 2.0L STI engine, £6k on a wrx is most definitely madness, speak to mattyb in the breakers section, sure he'll have a couple of engines to chose from, also ask him what else you'll need as I think you may need an ECU avcs loom (if you want that to work) and possibly an STI inlet manifold, as above gearbox is no problem.
|
I've pmd mattyb in regards to sti lump and anything else needed, I assume these are a much stronger engine than most of the impreza range and I'm not going to be wasting my time?
|
Originally Posted by mudsplat2000
(Post 11746904)
I've pmd mattyb in regards to sti lump and anything else needed, I assume these are a much stronger engine than most of the impreza range and I'm not going to be wasting my time?
Would putting a different type engine in have a big impact on the cost of insurance? |
6k+ seems a bit steep :(
Don't know what Japspeeds rep is like but have a look here :thumb: http://m.ebay.co.uk/itm/COSWORTH-SUB...592?nav=SEARCH You'll need to factor in head gaskets, bolts, seals, oils etc etc and labour probably going to be well north of £5.5k. If the quote is for a none forged repair the above maybe an option?? |
Originally Posted by Steve001
(Post 11746922)
6k+ seems a bit steep :(
Don't know what Japspeeds rep is like but have a look here :thumb: http://m.ebay.co.uk/itm/COSWORTH-SUB...592?nav=SEARCH 6k for a forge 2.5 with block etc supplied isn't bad. |
Originally Posted by Tidgy
(Post 11746925)
+ heads + fitting.
6k for a forge 2.5 with block etc supplied isn't bad. |
Originally Posted by Steve001
(Post 11746934)
You typed a little quicker than me :lol1:
|
To be honest, and I don't think the OP wants to hear this but he really wants to think like an insurance company, the repairs are almost double the cars worth 'it's a write off' time to cut losses and look for something else :(
|
to be fair you could argue that for most engine rebuilds, depends on if you want to keep the car or not.
|
Also depends on if you can do a lot of the work yourself. With mine I bought a brand new WMS built 2.1 bare short block, then did the rest myself. Still came in just over 3K though.
|
Originally Posted by ScottyPPP
(Post 11746954)
Also depends on if you can do a lot of the work yourself. With mine I bought a brand new WMS built 2.1 bare short block, then did the rest myself. Still came in just over 3K though.
depends how competant you are with spanners, seen some right dodgy jobs though has to be said lol |
Originally Posted by Tidgy
(Post 11746956)
yeah thats can make a big difference as well.
depends how competant you are with spanners, seen some right dodgy jobs though has to be said lol |
Originally Posted by ScottyPPP
(Post 11746959)
Yeah, if you're not confident in your own ability leave it to someone who knows what they're doing!
|
All times are GMT +1. The time now is 02:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands