ABS delete kits.
2 Attachment(s)
Full abs delete kits available for all makes and models.
These kits replace all the standard hard lines throughout the car which are liable to corrosion, replacing them for high performance braided brake lines as well as removing the factory abs units. Kit will include: Line from BMC to front tee piece 2x lines from front tee piece to inner wings Line from BMC to rear tee piece 2x Lines from rear tee piece to inner wings 2x Tee pieces 40x Nylon P clips 40x Self tapping screws 2x New banjo bolts 4x Copper washers Half kit also available, which is consists of: Line from BMC to front tee piece 2x lines from front tee piece to inner wings Line from BMC to tee piece 2x Lines from tee piece to existing divider block in engine bay. 2x Tee pieces 20x Nylon P clips 20x Self tapping screws 2x New banjo bolts 4x Copper washers Full bulkhead kit also available, see below. We can also supply custom kits to your requirements, through car bulkhead fittings/hydros etc etc. All of our brake lines are professionally assembled in house using Hel performance fittings. Full kit £165 Half kit £125 Full kit with bulkhead fittings £195.....this kit is designed for cars with stripped interiors where no rear seats are in place etc as the lines run the centre of the car and split across the rear in place of the bench, includes lines with bulkhead fittings for a more proffesional, neater install. Attachment 42445 Attachment 42446 Available in many colours, please ask!! |
Exactly what I'm after!
I have a 1997 Impreza Turbo 2000 with ABS. I want to remove the ABS completely as its downright dangerous. What do I need and how much? |
Originally Posted by piehole1983
(Post 11742233)
Exactly what I'm after!
I have a 1997 Impreza Turbo 2000 with ABS. I want to remove the ABS completely as its downright dangerous. What do I need and how much? No its not the greatest of systems is it. Abs delete kit should see you right, a full kit for the impreza is priced at £165 plus £5.99 postage. The kit will replace all existing hard lines except calliper lines, these are available seperately if you do not already have some. |
Cool, I already have new braided caliper lines to go on sitting here so I'm ok that way. Do your lines follow the same route as the old hard lines?
|
Originally Posted by piehole1983
(Post 11742399)
Cool, I already have new braided caliper lines to go on sitting here so I'm ok that way. Do your lines follow the same route as the old hard lines?
|
Originally Posted by Pro-Line Motorsport
(Post 11742400)
Yes they do, although you can have a custom kit, routing a different way if you wish?
|
Originally Posted by piehole1983
(Post 11742401)
I happy with the normal routing. Hopefully it's not a torture to install! Is PayPal ok?
What colour kit would you like? |
Sorry, busy day at work! Think I'll go for black like my caliper lines. I'll pop the payment over shortly.
|
Where are you based? And do you do a fitted service?
|
Originally Posted by cookstar
(Post 11742729)
Where are you based? And do you do a fitted service?
|
You got any guides for the new pipework routing etc for when the ABS servo is removed?
|
The lines are labelled for easy install, it'll all make sense when you recive your kit ;)
|
I've already deleted the ABS and used some hardlines; not the best install as we had to route the lines as we went so I just want a tider option. Does this set-up put a t-piece equidistant between the brakes on each side? What.s the scope to include a break for my bias valve which is attached to the drivers seat subframe (fixed buckets).
Cheers |
Originally Posted by JonMc
(Post 11742793)
I've already deleted the ABS and used some hardlines; not the best install as we had to route the lines as we went so I just want a tider option. Does this set-up put a t-piece equidistant between the brakes on each side? What.s the scope to include a break for my bias valve which is attached to the drivers seat subframe (fixed buckets).
Cheers You wont get neater than these kits thats for sure, the spec for kit we make isnt equal no but i can make you one no problem, what with having the break for a bias it would be a good idea to mock it with string to the lengths you require, send me the string and the bias valve (or if you know the thread sizes)and il copy for lines. A method used by many of our customers. That way you have a fully bespoke kit to your lay out. All it will cost you is an extra £10 for the break for your bias.. |
I'll do some measuring once the engine is out and let you know. There's a couple of other tweeks that I need to account for (removing the spare wheel well etc).
Final question for now - how do you manage the connection to the master cylinder - is it a banjo bolt or a threaded end on the line? |
Originally Posted by JonMc
(Post 11742818)
Final question for now - how do you manage the connection to the master cylinder - is it a banjo bolt or a threaded end on the line?
|
Originally Posted by Pro-Line Motorsport
(Post 11742763)
The lines are labelled for easy install, it'll all make sense when you recive your kit ;)
|
Its usually a banjo, if youd prefer a male straight or 90, thats no problem, let me know which or both :)
|
Originally Posted by Pro-Line Motorsport
(Post 11742827)
Its usually a banjo, if youd prefer a male straight or 90, thats no problem, let me know which or both :)
|
1 Attachment(s)
|
Half kits now available also at £125!!! See post #1
|
Originally Posted by Pro-Line Motorsport
(Post 11744313)
Half kits now available also at £125!!! See post #1
|
Very good value for money yes!
Should be fine on bias, masters are always split front and rear and they are never equal pressures, usually carry a residual valve. We sell alot of 200sx kits and actually fitted one recently, the brakes locked up the wheels everytime with the abs (which is equally as bad as the subaru abs) must be a jap thing! removal kit just stopped the car no lock up and the pedal feel was soooo much nicer! |
Kit arrived today, looks very well made with quality stainless fittings. Thanks!
Any guides to identify which pipe is which? |
Glad it turnt up ok :)
Totally forgot to tell you, labelling machine died on me so couldnt label your kit.. I will pm you now. |
No worries! Thanks!
|
1 Attachment(s)
Impreza abs delete kits with bulkhead fittings front and rear also available at £195 delivered!
Non abs model full line replacement kits also available!! Attachment 41636 |
So you do fitting as well ?
Where are you guys based ? |
Based in Redhill, surrey and yes we can offer a fitting service :)
|
Originally Posted by Pro-Line Motorsport
(Post 11748903)
Based in Redhill, surrey and yes we can offer a fitting service :)
|
All times are GMT +1. The time now is 03:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands