Modded bugeye bumper, STI8 rear arches, splitter and more...
Bugeye bumper that has Orcari vents fitted and blended. The apertures have been opened and meshed. It will need a respray as the colour is DBM with a twist so the colour won't match any other car and under the grill is marked were the grill has rubbed - looking for £120 collected. Does not include the splitter.
http://img.photobucket.com/albums/v5...psz1jnrpqo.jpg http://img.photobucket.com/albums/v5...psd56upz2f.jpg HT Autos splitter - painted in black plasti-dip but does have some blemishes - I'll get some better pics up shortly - £60 collected. 12mm spacers - dual PCD, not sure what the second is but they are 5x100 for sure. These have been painted satin black. £15 plus delivery SOLD AND SHIPPED.. http://img.photobucket.com/albums/v5...psrmsiqqho.jpg 3 port oil catch can. 12mm pipes and has both a seperate drain and return to sump feeds. It is not baffled but you can fix that with some wire wool. £40 plus delivery SOLD AND SHIPPED. http://img.photobucket.com/albums/v5...psnytzcmx8.jpg http://img.photobucket.com/albums/v5...pslthucmba.jpg http://img.photobucket.com/albums/v5...psbqjswlzr.jpg http://img.photobucket.com/albums/v5...psletoorii.jpg Catch can vent - 25mm. WIll fit the above catch can - £5 plus delivery SOLD AND SHIPPED http://img.photobucket.com/albums/v5...ps2ypidvmr.jpg http://img.photobucket.com/albums/v5...pseazhpoxv.jpg AN10 (I think) blank. Will fit the return to sump thread on the catch can. £5 plus delivery SOLD AND SHIPPED. http://img.photobucket.com/albums/v5...psdnhi4cbe.jpg Anodised Red CDF Racing oil filler cap. Like new including the rubber seal. £30 plus delivery http://img.photobucket.com/albums/v5...ps8a15k1ap.jpg http://img.photobucket.com/albums/v5...ps18reedyn.jpg Genuine locking aerocatches - these are white but have been resprayed to matchg my car. The paint is coming off so they need stripping and repainting. They are also mnissing the bolts that they lock in to - these stripped a thread whilst eing removed but replacements can be bought cheap on ebay. These include the EPR under-bonnet mounts that are an optional extra although the bolts will need replacing - the ones in the picture have been used on my new catches and the old ones are too short to reach the nyloc in the supplied nuts. Includes all four keys. £25 plus delivery http://img.photobucket.com/albums/v5...ps205hxvqv.jpg http://img.photobucket.com/albums/v5...pspilxar2b.jpg http://img.photobucket.com/albums/v5...pscqygvzvo.jpg OE Brake proportioning valve - only removed to fit an adjustable one when I removed the ABS. £15 plus delivery http://img.photobucket.com/albums/v5...psc2ec1418.jpg 63mm humnp red silicon joiner hose - fits most common FMIC pipeworks (japspeed, Hybrid etc). £5 plus delivery. http://img.photobucket.com/albums/v5...psrhm3hax9.jpg 32mm (plain) and 25mm (ribbed) bungs. £5 each plus delivery 32mm bung SOLD AND SHIPPED http://img.photobucket.com/albums/v5...psx6fhyprr.jpg http://img.photobucket.com/albums/v5...psfmzgynij.jpg http://img.photobucket.com/albums/v5...pswicszgdz.jpg http://img.photobucket.com/albums/v5...psohlhv4f8.jpg Carbon centre vent cover - suits bugeyes and early blobs. This was a prototype so the fit is pretty poor iirc. £10 plus delivery. http://img.photobucket.com/albums/v5...psclzmdaap.jpg Metal header gaskets - multi-layered same as the OE ones (may even be OE). Used but in good condition - £10 plus delivery http://img.photobucket.com/albums/v5...psoofpfcua.jpg http://img.photobucket.com/albums/v5...pseddhitcy.jpg Carbon door panel trims - suit bugeye and early blobs - need to be glued in place but quite a good fit - £20 plus delivery http://img.photobucket.com/albums/v5...psfzgfjquh.jpg http://img.photobucket.com/albums/v5...ps0pkgibxx.jpg Oil filler neck - supposed to be a bugeye one but does not fit my new rocker covers - £10 plus delivery http://img.photobucket.com/albums/v5...psx2t93vyb.jpg http://img.photobucket.com/albums/v5...pskvaxge61.jpg Revotec 63mm duct - fitted but removed before use as I've gone larger. It will need some silkflex or double sided stickies to fit. £5 plus delivery. http://img.photobucket.com/albums/v5...psmdhhyp2j.jpg http://img.photobucket.com/albums/v5...psan5ji0st.jpg Bugeye (any maybe other newage) passenger airbags. No airbag lightrs one when these where fitted. £30 each - collection only. http://img.photobucket.com/albums/v5...pswozvvazc.jpg Bonnet release and cable, also inlcudes the catch for the bonnet which has some surface rust. Worked fine but longer required as I have aerocatches. £20 plus delivery http://img.photobucket.com/albums/v5...psk03e8agu.jpg Pair of new PU Rim STI8 style rear arches. These are unpainted and unused. They are a copy of the genuine items but are not GRP so have the same flexibility as the OE ones. A change of plan means these are no longer required - £50 plus delivery http://img.photobucket.com/albums/v5...psasrtcaa4.jpg http://img.photobucket.com/albums/v5...ps2btllrd7.jpg More to follow as I sort through the garage. If paying by paypal please expect to cover any fees. You can work those out here - http://finalfeecalculator.co.uk/ I'm open to SENSIBLE offers on all of these. |
Hi jon,
I'll take the catch tank with the blank and ash filter please |
Originally Posted by sunnyjones003
(Post 11736350)
Hi jon,
I'll take the catch tank with the blank and ash filter please |
Might be interested in that intake duct Jon, I'll see what size mine is and come back to you ASAP :thumb:
|
List updated:thumb:
|
BTTT:D
|
BTTT
|
Thread updated:thumb:
|
List updated:thumb:
|
Splitter
PM'd about the splitter buddy!
|
Replied...
|
BTTT
|
Isnt the window switches carbon covers missing a hole for the "door lock" buttons?
|
Originally Posted by south_scoob
(Post 11744389)
Isnt the window switches carbon covers missing a hole for the "door lock" buttons?
|
List updated and more to follow:thumb:
|
BTTT
|
Bump...
|
BTTT
|
Up
|
BTTT
|
BTTT
|
Black trim outside driver's side window
Hi, I have 2001 WRX in blue and need replacement for black trim outside driver's side window, mine looks like de-icer damaged, do you have one for sale ?
|
Originally Posted by Hammo
(Post 11793087)
Hi, I have 2001 WRX in blue and need replacement for black trim outside driver's side window, mine looks like de-icer damaged, do you have one for sale ?
|
All times are GMT +1. The time now is 04:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands