ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Full Cars Breaking For Spares (https://www.scoobynet.com/full-cars-breaking-for-spares-438/)
-   -   ++++BREAKING 500BHP JDM STI 7 WAGON,2.35,MDX,SYVECS,RCM,AST,18's,WHITELINE,DEFI' s++++ (https://www.scoobynet.com/full-cars-breaking-for-spares-438/1028781-breaking-500bhp-jdm-sti-7-wagon-2-35-mdx-syvecs-rcm-ast-18s-whiteline-defis.html)

Scott@ScoobySpares 25 August 2015 09:32 PM

++++BREAKING 500BHP JDM STI 7 WAGON,2.35,MDX,SYVECS,RCM,AST,18's,WHITELINE,DEFI' s++++
 
28 Attachment(s)
Here we have another awesome breaker fresh in it’s a 550bhp 2001 JDM STI 7 Wagon which has been extensively modified without a penny spared and is running 550bhp, All the mechanical parts in perfect working order and the engine had just been refreshed back in February and has done 4000 miles since half of these where running in miles at the time of the engine refresh the following was carried out new RCM Cosworth stopper gaskets, ACL Race bearings, cam cover gaskets, the turbo was also fully serviced by Turbodynamics with a new ceramic coated exhaust housing fitted, Also new Exedy Hyper clutch plates/release bearing where fitted. The vehicle has been meticulously maintained by the previous owner for the past 12 years with a full a4 binder containing all service stamps and every single invoice since owning the car the history this car has Is next level and a credit to its previous owner. It’s that good I was going to keep this one my but personal preferences have changed and im keeping my hawkeye. The vehicle has all the usual STI JDM extras such as big port avcs heads, sti wagon spoiler, sti projector headlamps, sti side skirt trims, factory dip tinted glass, jdm wind deflectors, jdm 6 speed short ratio non dccd gearbox, STI grey dash clocks, blue alcantara sti trim, sti 8 steering wheel. The following is the full spec of all the aftermarket parts on the car which are all spot on tried and tested:

+++ Engine and supporting modifications +++

• 2.35L engine: EJ22 2.2L closed deck block machined by SMG (Surrey), Mahle pistons, Carillo rods, 2.5L STI crankshaft, modified oil pump, 14mm ARP head stud conversion, RCM Cosworth stopper gaskets, Cosworth timing belt, S202 STI heads mildly ported/polished, Supertech valves.
• Custom 100mm cold air intake trumpet and ducting
• RCM 80mm induction kit
• RCM/SAMCO 76mm hybrid turbo intake pipe with no breather take offs
• Turbodynamics MDX 555-500 billet turbo with new Zircotec ceramic coated exhaust housing
• APS DR725 front mount intercooler
• RCM inlet manifold spacers with bolts
• RCM Zircotec ceramic coated exhaust manifold & up-pipe - brand new October 2014
• Milltek 3” decat exhaust system
• RCM Power Enterprise 840cc injectors, cleaned and flow tested at RCM
• NGK Racing 8 spark plugs
• RCM parallel fuel rails with Goodridge braided hose & fittings
• RCM 340 Aeromotive fuel pump
• Sytec in-line race fast flow fuel filter
• SX fuel pressure regulator
• Setrab black oil cooler 115mm x 16 row; Mocal in-line oil thermostatic sandwich plate; Goodridge braided hose & fittings
• Millers CFS 10w 50 engine oil; Silkolene SYN5 gearbox oil; Silkolene BOA 90LS diff oil
• Carl Davey tufnol header tank manifold spacers
• Zero/Sports slam panel cover
• Zero/Sports 1.3 bar Radiator Cap
• Zero/Sports CoolThermo (modified)
• RCM WRC blue pulley set
• Zero/Sports VF Effector grounding kit
• Syvecs S6GP Ecu with 8 switchable maps NTK wideband, data lead.

+++ Suspension, running gear and brake modifications +++

• Exedy Hyper Twin-plate clutch kit with new plates 4000 miles ago
• 18” Team Dynamics Pro-Race 1.2 wheels; Goodyear Eagle F1 Asymmetric 225 x 40
• AST coilovers
• RCM Group N engine mounts
• RCM Group N gearbox mount
• Whiteline rear ARB with solid drop-links
• Whiteline front ARB with adjustable drop-links
• Whiteline anti-lift kit
• Whiteline steering rack bushes
• Whiteline rear diff bushes
• STI spec c trailing arms
4 x Whiteline adjustable rear lateral arms
• Porsche 355mm big brake conversion AP Racing grooved/vented discs with custom bells, Pagid Black custom machined pads; Zero/sports braided hoses
• Brembo rear calipers; Brembo HS rear pads; Goodridge braided hoses, Black Diamond grooved/vented discs
• CDF Brake master cylinder stopper

+++ Bodywork & exterior modifications +++

• Rays Engineering 20 piece black locking nut set
• Zero/Sports front grille
• PIAA sports horns 500/600
• STI projector headlights with custom loom for tilt adjust

+++ Interior modifications +++

• Knocklink sensor
• Stack wideband AFR gauge with Bosch LSU sensor
• Defi BF system with Defi Link Control Unit II: Defi triple meter hood (fuel pressure; oil pressure; boost) RCM A pillar pod (water temp; oil temp)
+++ The vehicle has also been supplied with following extra bits +++

• 25L methanol (purchased December 2014)
• Old set of rays wheelnuts
• Original STI ECU with Ecutek license

We have just had the map checked by Andrew carr to ensure all these nice bits are working together as they should and everything is fine, the power all these bits are helping achieve is 500bhp on V Power; 550 bhp on 20% methanol

Attachment 43933

Attachment 43934

Attachment 43935

Attachment 43936

Attachment 43937

Attachment 43938

Attachment 43939

Attachment 43940

Attachment 43941

Attachment 43942

Attachment 43943

Attachment 43944

Attachment 43945

Attachment 43946

Attachment 43947

Attachment 43948

Attachment 43949

Attachment 43950

Attachment 43951

Attachment 43952

Attachment 43953

Attachment 43954

Attachment 43955

Attachment 43956

Attachment 43957

Attachment 43958

Attachment 43959

Attachment 43960










++++++ ENGINE AND ANCILARYS ++++++

Forged 2.35L engine consisting of: EJ22 2.2L closed deck block machined by SMG (Surrey), Mahle pistons, Carillo rods, 2.5L STI crankshaft, modified oil pump, 14mm ARP head stud conversion, RCM Cosworth stopper gaskets, Cosworth timing belt, S202 STI heads mildly ported/polished, Supertech valves. Supplied as a long engine £5000

SYVECS S6 PNP ECU to suit all newage sti’s with cal switch, ntk wideband, data lead, anti lag and launch control enabled £1100

MDX 555-500 billet turbo with near new Zircotec ceramic coated exhaust housing in excellent working order no smoke and pulls well supplied with oil feed pipe, rebuilt and checked and balanced by turbo dynamics 2000miles ago £1100

RCM/SAMCO 76mm hybrid turbo intake pipe with no breather take offs in great condition £150

APS DR725 front mount intercooler complete with all pipe work, silicone joiners and any mounting brackets £650

Setrab black oil cooler 115mm x 16 row; Mocal in-line oil thermostatic sandwich plate; Goodridge braided hose & fittings £150

RCM blue light weight billet pulley set £100

RCM Power Enterprise 840cc injectors, cleaned and flow tested at RCM recently, excellent working order great upgrade £250

RCM parallel fuel rails with Goodridge braided hose & fitting sx fuel regulator £400

RCM 340 Aeromotive intank fuel pump £60

Sytec in-line race fast flow fuel filter £40

RCM inlet manifold spacers with bolts £30

STI inlet manifold in blue with tgv deletes £80

STI avcs engine/inlet manifold wiring loom £40

Newage coilpacks £60 for the set of 4 or £20 each or Set of 4 with wiring plugs £90

Used NGK Racing 8 spark plugs 5000 miles old £80

RCM Group N engine mounts 380

RCM Zircotec ceramic coated exhaust manifold & up-pipe - brand new October 2014, in excellent condition £450

Milltek 3” decat exhaust system: downpipe, mid-section and tail pipe with 4” tip excellent condition £450

RCM Custom 100mm cold air intake trumpet with near new RCM 80mm air filter £100

3 port classic boost solenoid £35

3 Bar MAP sensor excellent working order £50

Throttle body complete with tps and idle control valve perfect working order £40

Crank sensor perfect working order £30

Front cam sensor perfect working order £30

Lambda sensor genuine denso part perfectly working £80

2nd lambda sensor perfectly working £35

Newage metal Header tank good con no leaks £30

2001-2003 Power steering pump in perfect working order £40

PAS pipes with relocation bottle and cooler £30

6 speed starter motor £40

3 Pin alternator perfect working order £30

Radiator with both fans good condition no leaks or broken brackets £70

SAMCO blue Top radiator hose & Bottom radiator hose good condition £40

Zero/Sports slam panel cover £65

Zero/Sports 1.3 bar Radiator Cap £20

Zero/Sports Cool thermostat £40

Zero/Sports VF Effector grounding kit £50

Windscreen washer bottle with pump £10

Battery clamp and threaded bars £15

JDM STI intercooler water spray set up, with bottle switch pipe work and jet £40



++++++ TRANSMISSION / RUNNING GEAR / BRAKES / WHEELS / SUSPENSION ++++++
2001 Non DCCD JDM short ratio 6 speed gearbox that is in perfect working order very nice box smooth goes through all gears with no whines or crunches at all tried and tested works perfectly. Comes Complete with matching prop shaft, gearbox cradle, gear selector/linkage and the matching 3.9 R180 rear diff, gear box code TY856WN4CA. £1550… All hubs and shafts also available 5x100 for a good deal on a conversion pakage pm me or cal us

RCM Group N gearbox mount £60

Exedy Hyper Twin-plate clutch kit with new plates 4000 miles ago £750

Female STI 01-03 front drive shafts £50 per shaft

R180 rear drive shafts, sold as a pair £185

Full set of 5x100 r180 hubs £300

5x100 r180 front hubs with good bearings £70 per hub

5x100 STI R180 rear hubs in good mechanical order some minor corrosion to the backing plates, sold as a pair £200


18” Team Dynamics Pro-Race 1.2 wheels with Goodyear Eagle F1 225/40/18 tires which are all well above 6mm, some very minor marks that have been professionally touched up £500


Porsche 355mm big brake conversion AP Racing grooved/vented discs with custom bells, Pagid Black custom machined pads; Zero/sports braided hoses spare set of pagid yellows also supplied. Awesome stopping power working perfectly all bleed nipples are free moving and mounting threads/bolts are un damaged, 100pcd/114pcd discs. Excellent upgrade £1100


Brembo rear brake calipers with brembo rear pads, Goodridge braided hoses, Black Diamond grooved discs. Working perfectly all bleed nipples are free moving and mounting threads/bolts are un damaged, 100pcd discs. Excellent upgrade for a wrx/classic/forester or legacy all bolts included £250

AST coilovers with camber adjustment top mounts on the front excellent working order no knocks or bangs £450

Whiteline rear ARB with solid alloy drop-links £150

Whiteline front ARB with adjustable drop-links £150

Whiteline anti-lift kit with all spacers and bolts £100

Whiteline rear diff bushes and t bar bushes fitted in place £100

STI spec c trailing arms £80

4 x Whiteline adjustable rear lateral arms freshly painted in silver £200

STI TITANIUM front strut brace £120

ZERO SPORT rear wagon strut brace £60

Front engine subframe good condition no rot £50

Front lower U Frame good condition no rot £100

Rear subframe good con condition no rot £50

Front alloy wishbones £30 each

STI quick steering rack £200

STI stronger brake master cylinder good working order £25

STI clutch master cylinder with relocation reservoir £25

CDF Brake master cylinder stopper £30




++++++ EXTERIOR PANELS AND BODY WORK ++++++

ALL PANELS 02c BLUE

Super rare STI 7 bugeye wagon shell complete fully paneled with all glass, full wiring loom, full dash and all interior plastics, also comes with I.D and paper work, all parts are left on like fuel tank and fuel lines all brake lines and most interior plastics etc ideal projects £2200 very good offers considered

++++++ INTERIOR TRIM / STEERING WHEEL / CENTRE CONSOLE ++++++


STI 8 black steering wheel top with air bag £120

STI 7 blue alcantara wagon trim including front and rear seat and door cards £350

Knocklink £80

Stack wideband AFR gauge with Bosch LSU sensor £100

5x Defi BF system with Defi Link Control Unit: Defi triple meter hood (fuel pressure; oil pressure; boost) RCM A pillar pod (water temp; oil temp)
DEFI GAUGES, 5x smoked with white illumination, gauges include oil pressure / oil temperature / boost / water temp / fuel pressure, including all 5 sensors, wiring, controller, pillar pod and dash top pod £700

Original STI ecu with ecutek map £100

JDM grey STI Dash clocks £65

STI gear stick surrounds £25

Silver Standard double din head unit perfect working order £30

Newage dash top time clock £20

Stereo surround good condition no scratches £20

Top heater vents good condition no scratches £10

Center console with arm rest good condition no major scratches £20

Chrome sti door handles to suit above for 01/02 onward wrx as a great upgrade £20set

Brembo space saver with good tyre £30

OEM jack + handle £20

OEM Tool kit £20


All prices are based on collection, Most items can be shipped uk or worldwide without an issue please contact us for accurate postage prices. All items can be collected in person or by your own arranged courier,

SCOOBY SPARES LTD

Unit 1 siding road
Fleetwood
Lancashire
FY7 6NS
TEL: 01253 871188

Email: sales@scoobyspares.com
Web: www.scoobyspares.com


FEEL FREE TO AS IF I'VE MISSED ANYTHING YOU REQUIRE

Scott@ScoobySpares 25 August 2015 09:41 PM

21 Attachment(s)
Attachment 43912

Attachment 43913

Attachment 43914

Attachment 43915

Attachment 43916

Attachment 43917

Attachment 43918

Attachment 43919

Attachment 43920

Attachment 43921

Attachment 43922

Attachment 43923

http://i1118.photobucket.com/albums/...psig5fstqg.jpg

Attachment 43924

Attachment 43925

Attachment 43926

Attachment 43927

Attachment 43928

Attachment 43929

Attachment 43930

Attachment 43931

Attachment 43932

Scoobynutter33 26 August 2015 06:00 PM

Any picture of engine out and how many miles on refresh ?

Likko 26 August 2015 07:17 PM

Could you PM me a price for the coilovers and the grille.

bro82 26 August 2015 08:26 PM

does the wind deflectors are still for sale if so will they fit saloon?
does 3 port boost solenois comes with harnes, bracket and pipes?

Scott@ScoobySpares 27 August 2015 12:15 PM


Originally Posted by Scoobynutter33 (Post 11728835)
Any picture of engine out and how many miles on refresh ?

sorry the engine has just been sold

+++ ENGINE SOLD +++


Originally Posted by Likko (Post 11728872)
Could you PM me a price for the coilovers and the grille.

coilvers £450, zero sports grill £75


Originally Posted by bro82 (Post 11728890)
does the wind deflectors are still for sale if so will they fit saloon?
does 3 port boost solenois comes with harnes, bracket and pipes?

window deflectors to stay with the shell, 3 port boost solenoid £30 come with plug

Likko 27 August 2015 01:56 PM

I forgot to ask what series the AST coilovers are.

Inviroman 27 August 2015 02:32 PM

Is the price for wheels/tyres delivered?
Thanks.

kaine19 27 August 2015 03:48 PM

Will the fuel pump fit a classic. If so I take it. What colour is the battery clamp

bustaMOVEs 27 August 2015 05:55 PM

You don't fancy selling the other 2 defis on their own do you? Oil/water temp. And you'll still have a set left to sell.

Scott@ScoobySpares 27 August 2015 08:10 PM


Originally Posted by bustaMOVEs (Post 11729160)
You don't fancy selling the other 2 defis on their own do you? Oil/water temp. And you'll still have a set left to sell.

sorry we won't split the defis


Originally Posted by Likko (Post 11729108)
I forgot to ask what series the AST coilovers are.

sorry the ast coilovers are sold


Originally Posted by Inviroman (Post 11729118)
Is the price for wheels/tyres delivered?
Thanks.

No all prices are plus delivery, delivery on a set of wheels to a mainland uk address is £30 if you are not mainland uk pm me your address and i'll quote for delivery.


Originally Posted by kaine19 (Post 11729133)
Will the fuel pump fit a classic. If so I take it. What colour is the battery clamp

yes it will fit a classic no problem pm me or call us to finalize payment, the battery clamp is standard so its black.

kaine19 28 August 2015 11:20 AM

yes it will fit a classic no problem pm me or call us to finalize payment, the battery clamp is standard so its black.[/QUOTE]

Have give you a text mate

s1wrx 28 August 2015 12:52 PM

Interior
 
Do you have pics of interior please?
Cheers

Steve's Sti 28 August 2015 12:57 PM

if I bought the other 3 defi's with the pod hood and controller would you split?

wrxjut 28 August 2015 02:25 PM

hiya, how much for headlights for delivery to Bournemouth.
Thx

Scott@ScoobySpares 28 August 2015 07:09 PM


Originally Posted by Steve's Sti (Post 11729456)
if I bought the other 3 defi's with the pod hood and controller would you split?

sorry we wont split the 5 defis, but we do have a ste of 3 in another same style in another breaker listed on here its a 2004 sti 8 with solaris sc46 forged engine, 3x gauges all sensors pod and controller £450


Originally Posted by wrxjut (Post 11729476)
hiya, how much for headlights for delivery to Bournemouth.
Thx

projector sti headlamps £280 delivered


Originally Posted by s1wrx (Post 11729455)
Do you have pics of interior please?
Cheers

i shall upload some and pm you them :thumb:

Barnesy 01 September 2015 04:27 PM

what condition are the Porsche calipers and discs and pads

JamieR85 02 September 2015 08:33 PM

Will the exhaust manifold and up pipe fit a JDM hawk, also are the injectors a straight fit?

Cheers.

fizzyo 06 September 2015 10:51 AM

Hi do you still have the rays wheel nuts ?

Thanks

bwanaiguana 08 September 2015 06:29 AM

Hi

Do you still have the gearbox mount.

Andy

techdw 11 September 2015 03:48 PM

HI,

How much is the following,

RCM Power Enterprise 840cc injectors, cleaned and flow tested at RCM - Any receipt to backup the clean and flow test?

RCM Group N engine mounts

RCM Group N gearbox mount

Thanks,

Peakie 12 September 2015 08:09 PM

1 Attachment(s)
Attachment 43190 Hi., have you got one of these windscreen interior demister panel, it's for a blobeye but think bug/blob/Hawkeyes are the same. Cheers

Scott@ScoobySpares 16 September 2015 06:33 PM


Originally Posted by Barnesy (Post 11731028)
what condition are the Porsche calipers and discs and pads

sorry they are sold


Originally Posted by JamieR85 (Post 11731598)
Will the exhaust manifold and up pipe fit a JDM hawk, also are the injectors a straight fit?

Cheers.

sorry no the manifold will not fit these are single scroll unlike your jdm hawk which is twin scroll


Originally Posted by fizzyo (Post 11733075)
Hi do you still have the rays wheel nuts ?

Thanks

yes we do drop me a pm or call us to discuss further



Originally Posted by Peakie (Post 11735893)
Hi., have you got one of these windscreen interior demister panel, it's for a blobeye but think bug/blob/Hawkeyes are the same. Cheers

yes we do have this parts £25 delivered


Originally Posted by techdw (Post 11735256)
HI,

How much is the following,

RCM Power Enterprise 840cc injectors, cleaned and flow tested at RCM - Any receipt to backup the clean and flow test?

RCM Group N engine mounts

RCM Group N gearbox mount

Thanks,

hi here are prices below:

injectors £250
engine mounts sold
gearbox mount £60


Originally Posted by bwanaiguana (Post 11733863)
Hi

Do you still have the gearbox mount.

Andy

hi andy yes we do still have a solid gearbox mount

scott...

Peakie 16 September 2015 08:16 PM


Originally Posted by Scott@ScoobySpares (Post 11738052)
sorry they are sold



sorry no the manifold will not fit these are single scroll unlike your jdm hawk which is twin scroll



yes we do drop me a pm or call us to discuss further




yes we do have this parts £25 delivered




hi here are prices below:

injectors £250
engine mounts sold
gearbox mount £60



hi andy yes we do still have a solid gearbox mount

scott...

Hi, I'll take the windscreen demister panel then(it's for a blobeye which I'm sure are the same) do you want to pm me the bank details and I'll do a bank transfer or can do paypal if you want.? Cheers

Scott@ScoobySpares 16 September 2015 09:37 PM

PayPal is fine to sales@scoobyspares.com leave a note with address and what payment is for

Thanks

Nick71 19 September 2015 08:56 PM

How much for the front brake set up?

Mister:E 20 September 2015 09:06 PM

How much for the complete bootlid?

paddyscoob 21 September 2015 11:03 AM

Rcm induction kit still available?

richl 26 September 2015 06:40 PM

Is the milltek exhaust still available? Would you split it as I am only after the downpipe?

Cheers Rich

LoganS 30 September 2015 12:34 AM

.....


All times are GMT +1. The time now is 06:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands