checking blades on a td05
Hey, with the td05 being top entry is there anyway of checking if the blades are fine and play in the shaft, I'm a noob at this so If its a silly question feel free to giggle before helping me
I don't have the turbo looking at sellers pictures its obviously tough to check |
Take the compressor housing off. It's held on with a big circlip at the rear of it. Needle nose pliers will get it off.
|
Originally Posted by ScottyPPP
(Post 11726789)
Take the compressor housing off. It's held on with a big circlip at the rear of it. Needle nose pliers will get it off.
|
Yes, on a TD05 there will be some side to side play as its a journal bearing turbo and this is the clearance for the oil. The blades shouldn't touch the housing though. And there should be no in and out play.
|
Originally Posted by ScottyPPP
(Post 11726983)
Yes, on a TD05 there will be some side to side play as its a journal bearing turbo and this is the clearance for the oil. The blades shouldn't touch the housing though. And there should be no in and out play.
|
All times are GMT +1. The time now is 04:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands