hawkeye sti clocks into wr1 sti
 

ive been trying to fit the clocks into my wr1 , th e2 problems i had was the block that didnt fit just shaved it down the problem i have is the constant buzzing from the clocks from start up there are numerous reads and all stating cut the c9 wire well that i have done and also the orange wire and also a black green with no effect so help needed if anybody as any or done this swap over
https://cimg2.ibsrv.net/gimg/www.sco...b0f08e2122.jpg


https://cimg3.ibsrv.net/gimg/www.sco...70d5226c8a.jpg

also here is a pic of the inside of the clocks the beige dome is i think is the siren for the buzzer wondering if this can be removed

I did this into an 05' STI and I cut C9 to sort it.

You sure you've got the right wire? I can't remember what colour mine was, but could possibly pop the cluster out at the weekend to check if you're still stuck.

sti clocks
 

all sorted with the info given off a scooby member the wire to cut was the yellow one on the plug nearest the drivers door :thumb:

I was going to guess Yellow!!!