ScoobyNet.com - Subaru Enthusiast Forum - 2001 Bugeye Wagon, vf43, lots of performance parts

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)

- Full Cars Breaking For Spares (https://www.scoobynet.com/full-cars-breaking-for-spares-449/)

- - 2001 Bugeye Wagon, vf43, lots of performance parts (https://www.scoobynet.com/full-cars-breaking-for-spares-449/1027975-2001-bugeye-wagon-vf43-lots-of-performance-parts.html)

2001 Bugeye Wagon, vf43, lots of performance parts

It is with regret that i have decided to break my 2001 bugeye wagon, which has developed a slight bottom end knock prior to being remapped.

All parts are still on the car although they will start to be removed in the next couple of days. The spec was quite high and it would have been running approx 375bhp. Any questions tel 07717844767.

Everything is for sale on the car, the main parts are as follows:

VF43 turbo, no smoke, no play in shaft, slight crack on exhaust housing as all the VF series have. Good for 375 easily, front entry turbo, direct replacement for td04 or td05, £360. SOLD
Phase 2 STI pink injectors, 550cc, from 2004 car, fully tested and working £120
Large STI top mount intercooler from hawkeye sti with Prodrive Y pipe £150 SOLD. Matching undertray £60 SOLD.
Larger STI bonnet scoop in WR Blue £50
Genuine HKS SSQV dump valve for newage fitment £110 SOLD
Reconditioned 5 speed gearbox, TY754 casing (much stronger than TY752). No rattles, whines or crunches, perfect condition £450
Exedy Racing stage 1 organic clutch almost as new (2000 miles only) £150
Rear Diff, just had oil change to mobil fully synthetic £200
Driveshafts £45 each
Huge Mishimoto ally race spec radiator, was £280 new, excellent condition £160 SOLD
Toyo Sports 3 inch bellmouth decat down pipe with lambda boss £120
2 sets of stainless headers with matching up pipes. 1 set has ported headers with port matched 2 into 1 up pipe. heatwrapped. £150 per set
STi newage alloy bottom front wishbones with steel tapered inserts £60 each
Billet ally polybushed front arb droplinks £40 SOLD
Billet ally polybushed rear arb droplinks £40 SOLD
Blue anodised cold air intake with MAF boss and filter £75 SOLD
Genuine Sytec adjustable fuel pressure regulator with gauge £50
Refurbished 4 pot front calipers in blue £150
2 pot rear calipers in blue with discs £150
New water pump and cambelt and small idler, done 12 miles only so perfectly fine to refit £100
Full interior including unripped seats with good bolsters etc, rear seat, door cards £150 SOLD
Bugeye headlights £50 each
Bugeye foglights £20 each
STI front lower underbrace (H brace) £45 SOLD
Sti front upper strutbrace for newage £65 SOLD

All sensors, inlet manifold, fuel rails, coolant pipes, turbo intake pipe, coil packs, aircon system, alternator, power steering pump etc etc all available. If you dont see it listed just ask. pictures of all parts available on request and will be added as parts are removed. Shipping will be at a minimal additional cost depending on size and weight of item.

http://i7.photobucket.com/albums/y29...pshmx9yecq.jpg
http://i7.photobucket.com/albums/y29...psxgwmqsjh.jpg

What exhaust is on it?

What colour is this?

What exhaust is on it ?

Will the up pipe fit standard down pipe ?

I might be interested in the clutch if you can confirm the part number? Is it the anti judder one? How much meats on it? Any pics?

Pictures please of the headers and up pipe if possible

Thx in advance

Quote:

Originally Posted by Gurj (Post 11720077)

What wheels?

Standard bugeye 17's. I have 2 sets.

Set 1 are in average condition, some minor kerbing. the tyres are Kumho Ecsta Le Sports, 215, 45, 17's. One pair are brand new, less than 15 miles and the other pair are less than 1500 miles. £250.

Set 2 are same wheels but better condition by far. tyres are a very used set of Yoko A048's, you might get 1 trackday out of them. £100.

Shipping is on top.

Photos can be provided if you are interested, shipping will be on top at approx £60 per set as I will have to pallet them, and thats what my courier charges me.

Quote:

Originally Posted by Kingy_88 (Post 11720383)

What exhaust is on it ?

Will the up pipe fit standard down pipe ?

Up pipes dont fit onto down pipes, they both fit the turbo, so not sure of what you mean by your question??

Quote:

Originally Posted by Ste333 (Post 11720482)

I might be interested in the clutch if you can confirm the part number? Is it the anti judder one? How much meats on it? Any pics?

Part nos - see below. Not sure if its the anti judder one, it certainly has no judder, it feels stock. Ive had several evos and imprezas up to 520bhp with varying types of clutch, so know the judder you can get with a paddle type first hand. This has lots of meat left of the friction plate, When i pop the engine out later ill take more photos. Its done very few miles. was running 275/290 with no slip at all and i was happy to run this at 375 but never got as far as mapping as it developed a slight bottom end knock after i had done the mechanical side of things in the way of the upgrades.

http://i7.photobucket.com/albums/y29...psz5twipyl.jpg
http://i7.photobucket.com/albums/y29...pskol4fm4w.jpg

Quote:

Originally Posted by kyah710 (Post 11720621)

Up pipes dont fit onto down pipes, they both fit the turbo, so not sure of what you mean by your question??

Sorry my bad... How much for the headers and up pipe you've added pics of, down pipe and centre section ?

Thanks

is the clutch still for sale? and how much includeing postage pls?

Will the centre exhaust fit my 2006 2.5 steve?

hi sorry i never got back to you, is the scoop still available?

Quote:

Originally Posted by Kingy_88 (Post 11720827)

Sorry my bad... How much for the headers and up pipe you've added pics of, down pipe and centre section ?

Thanks

Headers £150 with up pipe, downpipe £120, centre section £50. I'll have to check postage tomorrow due to size.

Quote:

Originally Posted by chucky1970 (Post 11720926)

is the clutch still for sale? and how much includeing postage pls?

Still available, £150 posted is best price I can do. Photos below:

http://i7.photobucket.com/albums/y29...psau81cvbs.jpg

http://i7.photobucket.com/albums/y29...pst35edd6r.jpg

http://i7.photobucket.com/albums/y29...ps6fihj6xv.jpg

http://i7.photobucket.com/albums/y29...ps0aqljvmd.jpg

http://i7.photobucket.com/albums/y29...psqchmmkh1.jpg

Quote:

Originally Posted by rsjohn (Post 11721299)

Will the centre exhaust fit my 2006 2.5 steve?

I can't confirm but you are welcome to pop over and take a look, or I can measure for you.

Quote:

Originally Posted by yabbadoo4 (Post 11721406)

hi sorry i never got back to you, is the scoop still available?

Yes still available:

http://i7.photobucket.com/albums/y29...ps4umemye3.jpg

http://i7.photobucket.com/albums/y29...pszsaba4c7.jpg

http://i7.photobucket.com/albums/y29...psve08sbdg.jpg

Thanks Where are you located mate ?

Will down pipe replace the standard one on a wagon or is it different size

Quote:

Originally Posted by Kingy_88 (Post 11722191)

Thanks Where are you located mate ?

Will down pipe replace the standard one on a wagon or is it different size

I'm on the Isle of Wight, but can post. If your current system is 2.5 inch then no. If it's 3 inch, yes.

Quote:

Originally Posted by kyah710 (Post 11722327)

I'm on the Isle of Wight, but can post. If your current system is 2.5 inch then no. If it's 3 inch, yes.

Ok thanks I'll have to check I have a cat back exhaust on atm but not sure what size it is

Quote:

Originally Posted by jaygsi (Post 11722199)

Shocks?

I removed these today and they weren't as I expected/was told when I bought the car, so the description above is incorrect.

They are standard wrx on the front and kyb's on the rear on red apex springs, look like 40mm drop. All in good condition. I'll check part numbers and take photos tomorrow to confirm what they are.

Id be interested in the springs price depending steve

Quote:

Originally Posted by rsjohn (Post 11722887)

Id be interested in the springs price depending steve

The springs are spax SSX SO36010, lowers front 30mm and rear 25mm. It's this set: http://www.demon-tweeks.co.uk/perfor...30mm-rear-25mm

I'd rather sell them with the shocks than disassemble. The fronts are standard Impreza as far as I know. The rears are KYB Excel-G.

http://i7.photobucket.com/albums/y29...psdxqz9e0m.jpg

http://i7.photobucket.com/albums/y29...ps8twugvqm.jpg

http://i7.photobucket.com/albums/y29...psfhrpfain.jpg

http://i7.photobucket.com/albums/y29...psixiw6vvs.jpg

IS the Sytec fpr and gauge still available?

Thanks

Quote:

Originally Posted by just me (Post 11723090)

IS the Sytec fpr and gauge still available?

Thanks

Yes still available

Could you do the fpr and guage for £50 including postage?

hi bud pm me your paypal details again as i def want the scoop if its not sold. cheers