2.35 build cost
How much would I need to be looking at for a full 2.35 build including cdb. Sorry if this has been discussed before but I have searched and can't find an answer for a complete start to finish build. If someone has the time a shopping list would also be much appreciated. Cheers dave
|
How long is a piece of string, a decent block on standard bores is 1000-1200
Plus machining, plus components. Depends on what your building it for. What are you building it for? How much power would you like to run |
got to a tuner and ask, expect 10k +
|
As above, it's a how long is a piece of string question. The engine is only the beginning, the ancillaries and turbo,ECU will also cost a small fortune.
You really need to speak to a few tuners so they can get an idea of what it is you want and come up with a spec and price it all up for you. The three I'd be talking to are; Scooby Clinic Engine Tuner API In no particular order, but as above expect to be at the very,very least £10k lighter and more realistically £15k by the time you have a car that runs stops and goes around corners as you'd want it to. And if you want the best of everything probably double that. |
I priced one up about 2 years ago, nothing mad, just a nice 500hp... £17k+
|
|
Originally Posted by ditchmyster
(Post 11719828)
As above, it's a how long is a piece of string question. The engine is only the beginning, the ancillaries and turbo,ECU will also cost a small fortune.
You really need to speak to a few tuners so they can get an idea of what it is you want and come up with a spec and price it all up for you. The three I'd be talking to are; Scooby Clinic Engine Tuner API In no particular order, but as above expect to be at the very,very least £10k lighter and more realistically £15k by the time you have a car that runs stops and goes around corners as you'd want it to. And if you want the best of everything probably double that. |
I helped fud source parts for his 2.35 on his race RA, the full long engine inc worked avcs heads cost him £12k
|
Originally Posted by banny sti
(Post 11719853)
I helped fud source parts for his 2.35 on his race RA, the full long engine inc worked avcs heads cost him £12k
|
Originally Posted by Tidgy
(Post 11719858)
guessing thats not inc ecu, turbo setup etc etc?
|
£10-£15K on the engine itself (that's the long engine, no ancillaries) depending on overall spec, then up to £20-£30K by the time you add all the supporting mods to make full use of it, depending on the spec of the donor or project car it is all being fitted to.
|
Did that include it built Banny? :)
|
Originally Posted by ronjeramy
(Post 11719862)
Did that include it built Banny? :)
|
Depends on starting point, but from standard car near 20k to get someone else to do it.
|
What are you using the car for
|
Originally Posted by Tidgy
(Post 11719852)
Personally i wouldn't use API now Davids moved on
|
Originally Posted by JDM_Stig
(Post 11719896)
Why is that ?
|
We are building four of these right now, all welcome to call me on 01752 345880 office hours for a chat. No obligation to buy anything!
|
Is it possible to use standard avcs heads and valve train on a 2.35?
|
Originally Posted by just me
(Post 11719995)
Is it possible to use standard avcs heads and valve train on a 2.35?
|
Originally Posted by banny sti
(Post 11719853)
I helped fud source parts for his 2.35 on his race RA, the full long engine inc worked avcs heads cost him £12k
|
Originally Posted by AS Performance
(Post 11720337)
seemed to recall i "helped" just a little also.............:lol1:
|
should have been back at the end of this season also for a refresh apart form he's now scattered the parts far and wide.............
wonder what he'll get next :norty: |
I may consider a 2.35 next, or a 2.1
|
My next build will be a 2.35
|
Im trying my hardest not to add it all up lol... Its a lot of the small items and the things you dont think about that quickly add up too..
https://cimg8.ibsrv.net/gimg/www.sco...538c74530b.jpg |
^^^That picture sure brings back some memories,and their not good ones.Good luck with your project mate;).SJ.
|
Another good options a fully built trick 2.1
Built heads, cams, full mashings I know a couple of people running them to very very good effect |
Originally Posted by joe v3sti
(Post 11720820)
Another good options a fully built trick 2.1
Built heads, cams, full mashings I know a couple of people running them to very very good effect I'm so excited to get it back as I had a "basic" ODB standard cams etc etc etc build on the last one, that did 535+hp for 30k miles, the new one with the all singing and dancing heads and cdb etc I have high hopes for..... |
Originally Posted by frayz
(Post 11720777)
My next build will be a 2.35
Which to be honest I've stopped commenting on, due to sounding like a stuck record. There's only so many times I can say I love it haha. Fair play to both you and Dave mate
Originally Posted by JGlanzaV
(Post 11720844)
Definitely, can attest that my 2.1 was very good! So good that I'm building another one!
I'm so excited to get it back as I had a "basic" ODB standard cams etc etc etc build on the last one, that did 535+hp for 30k miles, the new one with the all singing and dancing heads and cdb etc I have high hopes for..... When will it be done by? |
All times are GMT +1. The time now is 09:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands