Sourcing Parts for my Type R
 

Hi guys

I'm currently restoring my 1997 Type R and I'm trying to source replacement parts. My local subaru aren't being the greatest help at the moment.

I'm unsure if it's even possible to source some of parts I require but was hoping somebody could point me in the right direction.

I'm looking for new wings with the plastic inserts and all bolts/clips

Bumper bar front and back including bolts

Front splitter and clips/bolts

All the bolts and clips for the front bumper, back bumper and side skirts

Before

https://cimg8.ibsrv.net/gimg/www.sco...cdeb5409fa.jpg


Now

https://cimg1.ibsrv.net/gimg/www.sco...a820fe39dc.jpg


:(

Should be well worth it in the end

Any helps much appreciated

Thanks

ICP can prob help mate

http://www.importcarparts.co.uk/

Thanks Tidgy

This is going to be expensive . . . . . .

hahaha yeah, my R's just havin the engine rebuilt so i feel your pain

As already said, ICP is a good place to start, phone up and ask to speak to Luke. The front wings are the same as other GC8's so you will have no problems finding new front wings. Looks like a very nice V3 you have there, it will be well worth it in the end as these cars are getting rare to find these days, not many coming up in Japan anymore either! Future classic for sure!!

Search eBay for Subaru Trim Clips, the world is your oyster. I have sourced loads over the last few months for the bumpers, wheel arch liners and various other bits.

ICP are good quality parts but they can be had for less.

Drop M3_stu a message on here, he's done a full restoration on a P1 so may be able to tell you where he sourced his parts from.

Think I'll just keep adding to this rather than make a new thread for all my questions

So the glass guy came down today to remove my rear screen and windscreen. The windscreen needs replaced, he advised me that Japanese cars come with a bronze tint and I'll probably only be able to source a green tinted one here.

Does anyone know if I'll have any chance of finding a new original replacement ?

I'm also not having much luck with my local Subaru. Can anyone confirm if Subaru supply front wings with plastic insert/liner brand new ? If so I'll just phone the main parts department direct.

Anyway, I've got started ordering replacement parts from elsewhere


https://cimg0.ibsrv.net/gimg/www.sco...b8700d252f.png


So as I've mentioned already I'm needing to source new bolts/clips for the front and back bumper.

Are the V3 front and back bumpers the same fitment as the UK Turbos ? I know they differ in appearance but are all the mounting points the same ? I'm assuming it'll be alot easier to source the required parts for a UK car as opposed to my car.

Just one more question for now, why on earth do my doors weigh so much ?

Any input appreciated guys

Try seller impartsb46 on ebay for very cheap OE parts from Subaru UK.

The same age UK Turbo car will have the same spec bumpers. You may want to have a look inside the doors to see if they have had Dynamat stuck in.

The Version 3 Type R's are heavier than equivalent saloons and the doors are much bigger.

Type R 1240 Kg
WRX RA 1190 Kg
WRX STi Type RA 1200 Kg

Thanks for the input

I'll look that user up on eBay and see if they can be any help. Also going to send m3 stu a pm in the hope he can help with a few bits

A few more pics for now

Shot blasted all the small bits of surface rust

https://cimg7.ibsrv.net/gimg/www.sco...f5663de378.jpg

2nd skim of filler to repair the roof. Bonnet latch failed :( didn't do a great amount of damage but will require some work to make perfect. Wouldn't like to think of the damage had the bonnet been steel !

https://cimg6.ibsrv.net/gimg/www.sco...650744197b.jpg

Bronze glass is for the earlier cars. MY97 Type R is green(ish).
They aren't heavy compared to 2x doors from a 4 door car:
GC8 parts weight
:thumb:

I'm in the middle of restoring/tidying up my 98 Type R so Luke @ ICP is getting a bit of my cash as well :)

You should be able to get any of the tinted glass for your car (my glass said he could anyway),I've has to replace my windscreen (green tint) andf it was a brand new part.

It would be easier to cut the roof skin out and weld in a new one than try to skim and get right. Or, matt wrapit after.

Little more work done

Roof repaired

https://cimg6.ibsrv.net/gimg/www.sco...34da37bffe.jpg

I know it may not look nice but trust me it's a excellent repair

Doors have been stripped and repaired

https://cimg1.ibsrv.net/gimg/www.sco...ac79ca5c52.jpg

https://cimg3.ibsrv.net/gimg/www.sco...ac7c7d1707.jpg

Bodywork repaired

https://cimg4.ibsrv.net/gimg/www.sco...f971ea3cb3.jpg

I've also received a majority of my parts from Subaru

https://cimg5.ibsrv.net/gimg/www.sco...78dee74b23.jpg

Front and rear bumper bar. Windscreen and rear screen weather strips. Both plastic trims that run from front to back, last 2 in the country :)

https://cimg4.ibsrv.net/gimg/www.sco...12aee25ef4.jpg

New front wings and new plastic inserts

https://cimg9.ibsrv.net/gimg/www.sco...4de5e1581c.jpg

https://cimg1.ibsrv.net/gimg/www.sco...0845728eb4.jpg

Bolts and clips . . . . .

https://cimg8.ibsrv.net/gimg/www.sco...f43c4ad857.jpg

Just wish I knew where they all went :D

Still waiting on bolts/clips for side skirts, weather strips for the doors and those ridiculous clips that hold the scuttle panel on.

Hopefully the progress will speed up over the next few weeks

So some priming has been done


https://cimg4.ibsrv.net/gimg/www.sco...91f5907166.jpg




https://cimg6.ibsrv.net/gimg/www.sco...de9ac2e0f3.jpg


https://cimg8.ibsrv.net/gimg/www.sco...37553d603c.jpg

I'd just like to point out those rattle cans weren't used for priming lol

What I did use them on however was my front inner archers and surrounding area. The plan was to roll the car in the booth but decided I'll get a good enough job this way. Plus I don't need to fit/refit coilovers a ridiculous amount if times


https://cimg4.ibsrv.net/gimg/www.sco...d8f133a738.jpg



https://cimg5.ibsrv.net/gimg/www.sco...204d2f9395.jpg


https://cimg7.ibsrv.net/gimg/www.sco...0fa6326f2e.jpg


https://cimg9.ibsrv.net/gimg/www.sco...f04b919099.jpg


https://cimg1.ibsrv.net/gimg/www.sco...70127c82e3.jpg

Tomorrow I'll lacquer them then blast it with a ridiculous amount of cavity wax.

Finish lines so far away !

https://cimg8.ibsrv.net/gimg/www.sco...1a9a386fc4.jpg


https://cimg0.ibsrv.net/gimg/www.sco...c3a46e7491.jpg


https://cimg3.ibsrv.net/gimg/www.sco...fb9e13d604.jpg

I keep forgetting to take my camera to work so crap mobile phone ones will have to do for now

Nice one.

If you get chance, why not stick a thread in projects forum? I love a good thread like this and would have missed this normally.

So I've finished the front arches for now. Had to refit the coilovers as the car has to be mobile by Friday. I'll go back and tart up the brakes ect at a later date

https://cimg6.ibsrv.net/gimg/www.sco...ca770606b0.jpg


https://cimg7.ibsrv.net/gimg/www.sco...9523d1ee94.jpg


https://cimg8.ibsrv.net/gimg/www.sco...ab46ee53c4.jpg

Also repaired and resealed the sills. Rubbed them down and shot blasted a few small spots of rust. Primed then stone guard.

https://cimg2.ibsrv.net/gimg/www.sco...6d7730b9a9.jpg



https://cimg5.ibsrv.net/gimg/www.sco...5dec805e64.jpg


https://cimg6.ibsrv.net/gimg/www.sco...0c1c1a8849.jpg


https://cimg7.ibsrv.net/gimg/www.sco...dc19ba74e0.jpg

Not perfectly straight :D

Kept the interior nice and clean throughout


https://cimg9.ibsrv.net/gimg/www.sco...70b8b05f0c.jpg



https://cimg1.ibsrv.net/gimg/www.sco...22e656116e.jpg

Keep finding new jobs to do. Need to remove the fuel filler neck and I also found small rust patches inside the rear quarter where the coilovers sits that I missed previously

As it stands


https://cimg4.ibsrv.net/gimg/www.sco...53d76eb880.jpg

Decided I best do something about the interior


https://cimg1.ibsrv.net/gimg/www.sco...f0c51fac75.jpg


https://cimg2.ibsrv.net/gimg/www.sco...4a825661c2.jpg

Wheels back on


https://cimg3.ibsrv.net/gimg/www.sco...fce8dc1fed.jpg

Then outside for a blow down


https://cimg7.ibsrv.net/gimg/www.sco...47d05dea6b.jpg



https://cimg8.ibsrv.net/gimg/www.sco...22c7721620.jpg


https://cimg9.ibsrv.net/gimg/www.sco...87c92f65b2.jpg


https://cimg0.ibsrv.net/gimg/www.sco...04d5d4bb23.jpg


https://cimg1.ibsrv.net/gimg/www.sco...1985abc670.jpg

How are you getting along sourcing the front splitter?

Speak to Nathan about getting my 3 piece front splitter. Its my facelift parts (P1 front end, genuine V6 boot spoiler ect.) that's at his place just now. Just get him to pass on my number to you and can sort something out. I have original splitters here with spares for V3/4.

Car looked well when I seen it a while ago !

Kyle.

Small world :)

I'm after an original replacement, what kind of condition is the one you have in ? There's a p1 coming in for a respray that's after a boot if yours is available ?

Not asked subaru yet lol

A few more photos, more work on the roof

https://cimg4.ibsrv.net/gimg/www.sco...c5636284c6.jpg


https://cimg5.ibsrv.net/gimg/www.sco...5c0fafb328.jpg


https://cimg8.ibsrv.net/gimg/www.sco...0b2d26c627.jpg

Found a small amount of rust on the bottom of one of the doors. Repaired and resealed.

https://cimg0.ibsrv.net/gimg/www.sco...574d0a3e3f.jpg



https://cimg1.ibsrv.net/gimg/www.sco...ae40e9d30f.jpg

Inside painted


https://cimg5.ibsrv.net/gimg/www.sco...4af1b87d2a.jpg


https://cimg6.ibsrv.net/gimg/www.sco...b2d1d58831.jpg


https://cimg8.ibsrv.net/gimg/www.sco...d0cc34ec35.jpg

Inside of the boot and underside of the bonnet


https://cimg5.ibsrv.net/gimg/www.sco...6323567139.jpg

https://cimg9.ibsrv.net/gimg/www.sco...15fb236b12.jpg


https://cimg1.ibsrv.net/gimg/www.sco...fab56f38ab.jpg

Better quality pictures coming soon !

Fantastic thread
Inspiring for me too

Started repairing/prepping the inner rear arch and repaired the lip

https://cimg4.ibsrv.net/gimg/www.sco...e7c7dc39c6.jpg


https://cimg6.ibsrv.net/gimg/www.sco...e5632e92c0.jpg

More paint. Very happy with the quality


https://cimg4.ibsrv.net/gimg/www.sco...e8d46ec5e8.jpg



https://cimg5.ibsrv.net/gimg/www.sco...eec0a77b9a.jpg


https://cimg8.ibsrv.net/gimg/www.sco...62ac1363ab.jpg


https://cimg0.ibsrv.net/gimg/www.sco...93fd01d6c2.jpg


https://cimg1.ibsrv.net/gimg/www.sco...9e00bc1e86.jpg


https://cimg2.ibsrv.net/gimg/www.sco...2daf897b53.jpg


https://cimg3.ibsrv.net/gimg/www.sco...36a6d15867.jpg


https://cimg4.ibsrv.net/gimg/www.sco...2d8d9841c4.jpg


https://cimg5.ibsrv.net/gimg/www.sco...d57310b491.jpg

Not the best pictures, again. I will take my camera next time. They also make my workshop look more messy than it actually is, honest :)

Hi Stef,

Cars looking well! Sorry I haven't been in touch sooner.

The P1 bumpers and V6 tailgate and spoiler are mine due to be sprayed white for my Type R. I was in a bit of a mishap with my job situation and have asked Nathan to put it all on hold for the time being. I'm going back to Audi now so can get back on with getting the stuff sorted.

I'll get some pics and fire them over to you on Facebook or something. They are original splutters but they have been through a battle or three. Nothing Nathan couldn't sort though he a brilliant painter.

Kyle

So I'm quite far behind with this. Cars painted now and currently being put back together.

So here's some older photos

Inside of the rear arches done

https://cimg4.ibsrv.net/gimg/www.sco...b38f5ff484.jpg



https://cimg5.ibsrv.net/gimg/www.sco...6abdf8d1da.jpg

Mirrors, bonnet scoop and rear bumper

https://cimg0.ibsrv.net/gimg/www.sco...c76cd90df8.jpg



https://cimg2.ibsrv.net/gimg/www.sco...ffdd2040ae.jpg


https://cimg3.ibsrv.net/gimg/www.sco...34af17dc4b.jpg


https://cimg5.ibsrv.net/gimg/www.sco...f40d2da357.jpg

Roof


https://cimg3.ibsrv.net/gimg/www.sco...430c6a7130.jpg


https://cimg5.ibsrv.net/gimg/www.sco...be549b3d63.jpg


https://cimg6.ibsrv.net/gimg/www.sco...9f4860a620.jpg

Still a small dent in the roof that will need repaired again unfortunately

Had the door hinges, bonnet hinges, rear strut mounts and bracing bars all shot blasted. Have been primed, painted and lacquered.


https://cimg1.ibsrv.net/gimg/www.sco...b4d93de39b.jpg


The painter has all the photos of the respray on his phone that I'll get shortly. The finish is ridiculously good

That's all I have for now. If anyone in the dundee area knows how to build a classic back together with just a box of random bolts your more than welcome to come down haha

So starting to come along nicely

Had the windows refitted today along with all new weather strips including roof rails


https://cimg9.ibsrv.net/gimg/www.sco...7294b7b0e2.jpg


https://cimg0.ibsrv.net/gimg/www.sco...ae19a225e0.jpg


https://cimg1.ibsrv.net/gimg/www.sco...3a015d9622.jpg


https://cimg2.ibsrv.net/gimg/www.sco...38bc53a538.jpg


https://cimg3.ibsrv.net/gimg/www.sco...d6a29b0298.jpg


https://cimg4.ibsrv.net/gimg/www.sco...048bd4d053.jpg


Fitted the doors along with new weather strips, seals and bolts to go with my freshly painted hinges


https://cimg5.ibsrv.net/gimg/www.sco...53f22f76ea.jpg


https://cimg6.ibsrv.net/gimg/www.sco...d9b004a769.jpg


Seem to be having a bit of trouble replacing a few rubber seals.

I need to find a seal to run around the edge of the rear 1/4 window frame. Also need a replacement seal that runs along the top edge of the side skirts and front splitter.

Any suggestions would be much appreciated