Engine Management Light on
 

Hi Guys
I really need some help
I have a subaru sti 2004 and the engine Management light keeps coming on we have changed the crank sensor then it went off drove the car for 30 miles then come back on, all 3 sensors are working, can any one help I am very stuck :-(


Thanks

daft question but what code is it throwing up ?

engine Management light keeps coming on P0365
 

Hi Guys
I really need some help
I have a subaru sti 2004 and the engine Management light keeps coming on we have changed the crank sensor then it went off drove the car for 30 miles then come back on, all 3 sensors are working, can any one help I am very stuck :-(


P0365 Camshaft Bank 1 Sensor B
Changed sensor and wiring loom checked wiring to the block near the Air box
Checked Block connector
Do you think its a Value Timing problem.


Please help



Thanks

Cam sensor error code but you have changed 3 crank sensors ?

all 3 have been replaced

under what driving conditions did the light first come on?

also could be worth following the wiring back to the connectors and make sure no water has got in:
https://www.scoobynet.com/general-te...on-sensor.html

Have you had the timing belt changed recently? Sounds like could be one tooth out