ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Wales (https://www.scoobynet.com/wales-26/)
-   -   Thanks To Three Arches (https://www.scoobynet.com/wales-26/1025572-thanks-to-three-arches.html)

Cannon Fodder 06 June 2015 06:48 AM

Thanks To Three Arches
 
Just a quick post to thank Dean and Dan at Three Arches for taking good care of my car yesterday, they fitted a Prodrive sports cat and a Scorpion deresonated centre section for me yesterday.

Dan even supplied and fitted for me a turbo heat shield modified to suit the new downpipe as otherwise it would have meant cutting up my factory item to suit.

Thanks again and thoroughly recommended. :)

The Trooper 1815 06 June 2015 11:24 AM

It did look good yesterday Ty, far play.

Cannon Fodder 06 June 2015 02:49 PM


Originally Posted by The Trooper 1815 (Post 11693138)
It did look good yesterday Ty, far play.

Thanks Ian, they did a great job as always.

Here is a quick video clip of the exhaust, it sounds a little raspy at the moment but once it's bedded in the tone should change.

http://i580.photobucket.com/albums/s...psb35xgi0a.jpg

S3LDM 08 June 2015 09:15 AM

Nothing but good feedback from the boys at Three Arches fair play

And it Sounds lovely Ty, your car is looking lovely now in all fairness :)

STI Glenn 08 June 2015 04:50 PM

Nice one .how loud is it with deresonated centre section

Cannon Fodder 08 June 2015 05:59 PM

It's louder Glenn but not massively, the tone has changed but once the centre section has bedded in it'll be less raspy. :)

Cannon Fodder 08 June 2015 06:02 PM


Originally Posted by S3LDM (Post 11693975)
Nothing but good feedback from the boys at Three Arches fair play

And it Sounds lovely Ty, your car is looking lovely now in all fairness :)

Thanks Lee. :thumb:

ScoobyNudge 01 July 2015 08:04 AM

Think I'm gonna book a service there heard good things

fpan 01 July 2015 10:27 AM

For what it's worth the OEM heat shield fitted fine over the Prodrive downpipe I had fitted in mine.

What's the clearance like from the steering knuckle?

I had to heat and bash mine to minimise the touching of the steering knuckle when cornering hard on left hand bends.

Cannon Fodder 01 July 2015 12:10 PM


Originally Posted by fpan (Post 11704779)
For what it's worth the OEM heat shield fitted fine over the Prodrive downpipe I had fitted in mine.

What's the clearance like from the steering knuckle?

I had to heat and bash mine to minimise the touching of the steering knuckle when cornering hard on left hand bends.

The clearance on mine is fine, no knocking on cornering or needing to 'modify' the downpipe to suit. :)


All times are GMT +1. The time now is 12:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands