ScoobyNet.com - Subaru Enthusiast Forum - Apexi AVCR revs reading low

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)

- Engine Management and ECU Remapping (https://www.scoobynet.com/engine-management-and-ecu-remapping-453/)

- - Apexi AVCR revs reading low (https://www.scoobynet.com/engine-management-and-ecu-remapping-453/1024110-apexi-avcr-revs-reading-low.html)

Cullenmin

04 May 2015 10:22 PM

Apexi AVCR revs reading low

Hi Folks,

my Apexi AVCR is reading too low. Does anyone know if there is a function on the ACVR that I can adjust to correct it?

At idle it is reading approx 600 rpm, whilst the Apexi Commander reads 1000 rpm and the instrument cluster reads 1000 rpm.

Cheers
Rich

timmy2take

05 May 2015 07:26 AM

Try a master reset

Cullenmin

05 May 2015 02:10 PM

Would that not wipe the current boost settings on it?

Thought there might be something I could adjust myself, but may have to just get it set up again by my mapper

Dubzy

05 May 2015 05:21 PM

Go through your settings and check that the value for cyl: is set to 4 and not 6.

Cullenmin

21 May 2015 06:04 PM

Quote:

Originally Posted by Dubzy (Post 11676101)

Go through your settings and check that the value for cyl: is set to 4 and not 6.

Hi mate, thanks for your suggestion, this has cured my issue.

I have no idea why it decided to go to 6 cyl! :confused:

Cheers
Rich

All times are GMT +1. The time now is 12:19 PM.