|
DV blanking plate
Does anyone know Where I can get my hands on a DV blanking plate and bung?
I fancy a change in noise and I'm getting a map tweek on Tuesday so I thought try and get this sorted before. Cheers in advance Tom |
Can the turbo run DV-less, some don't like it? What are you running? Classic or newage?
Someone on here was making them a while ago. |
Originally Posted by BrownPantsRacing
(Post 11669896)
Can the turbo run DV-less, some don't like it? What are you running? Classic or newage?
Someone on here was making them a while ago. |
Yep, that will most certainly be ok DV-less then.
There was definitely someone on here making and selling them at one point. Will have to do a search. P.s. car sounds lovely! |
Originally Posted by BrownPantsRacing
(Post 11669957)
Yep, that will most certainly be ok DV-less then.
There was definitely someone on here making and selling them at one point. Will have to do a search. P.s. car sounds lovely! i thought I remember a member on here that did them but I cant seem to find their details again :mad: I suppose I was pushing my luck with needing it for tuesday anyway. |
Pm sent
|
Just cut a coke tin to shape with a pair of scissors. Job done.
|
Originally Posted by rb5 stu
(Post 11670555)
Just cut a coke tin to shape with a pair of scissors. Job done.
Really??????? |
Thats basically what i done except used a small thin alloy sheet from B&Q, traced around the oe valve, cut to shape, drill 2 small holes then place inbetween the i/c and the oe valve..Job done...
Done it to mine some time ago but soon got fed up of the noise(too loud) lol. |
Originally Posted by rb5 stu
(Post 11670555)
Just cut a coke tin to shape with a pair of scissors. Job done.
I sold one of for a £1 one day on ebay plus postage for a laugh. it was that, a piece of tin cut to shape! o aye, and place it between gasket & existing dumpvalve |
Yes it just slides in between the dumpvalve and intercooler. Works perfectly and you cant see it. Ive had mine like that for years.
|
You dont even need to cut it and drill holes in it. I cut it to about the size of a two pound coin , loosen the two bolts a bit and slide it in between and retighten the bolts. Two min job. The bit that actually needs blocked is only a small hole, its not the size of the dumpvalve.
|
Originally Posted by rb5 stu
(Post 11670658)
You dont even need to cut it and drill holes in it. I cut it to about the size of a two pound coin , loosen the two bolts a bit and slide it in between and retighten the bolts. Two min job. The bit that actually needs blocked is only a small hole, its not the size of the dumpvalve.
|
Im not the one that made his own droplinks because you didnt want to spend money buying them. Stick that in your pipe and smoke it! lol
|
Cheers for the replies guys!!
Think I'll just bodge it with a steel plate between stock DV for tuesday then and then get a real solution on order from Whitenoise. Thanks for the help Tom |
| All times are GMT +1. The time now is 04:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands