Subaru Fast ii EPC - 2002 Prodrive Style STI Type UK
Hi folks.
has anyone had any experience of using this program? I have it (several blasted versions now :lol1:) and try as I might in whatever combination of iso installs on Windows 7, 8 or XP, I simply cannot get it to show any models past G10 Impreza, I have a Bugeye Prodrive Style so need it to show G11 :brickwall:brickwall:brickwall Any help would be much appreciated and I am happy to share my files as long as I am not breaching any forum rules. Thanks for any help anyone can give:confused: |
...Would this question get a response if it was about fitting something shiny to my Prodrive? lol...I reckon it would. I must remember in future to title queries thus;
"Fitting some Generic Shiny Carlos Fandangos to an STI" lol |
Originally Posted by Sti Prodrive Edition
(Post 11648163)
...Would this question get a response if it was about fitting something shiny to my Prodrive? lol...I reckon it would. I must remember in future to title queries thus;
"Fitting some Generic Shiny Carlos Fandangos to an STI" lol you start with smart comments. I am sure someone may well answer when they are home from work etc... |
Point taken and understood...but still nothing wrong with injecting a little humour into the proceedings. I thought I was just getting shunned cos people were jealous of my rare Type UK Prodrive (only 312 left on the road) LOL So far to date including buying the actual car...the entire project only owes me £800...plus £500 for a 2.5 litre WRX engine which is actually an Sti casting block...putting in EJ257 pistons conrods and crank to convert to full EJ257 spec then I am looking at about £2000 on the road albeit running a 5 speed box for the short-term as I haven't been lucky enough to find someone selling one who doesn't know the value of it LOL But not bad so far for a potentially £5,500 motor.
|
It's not jdm so no one really cares.
|
I have it. But I have it on discs. I also have the Jdm epc too.
|
Originally Posted by Raptorman
(Post 11648230)
It's not jdm so no one really cares.
You would if you had one LOL and I do so I do :luxhello: |
1 Attachment(s)
Originally Posted by Sti Prodrive Edition
(Post 11648227)
Point taken and understood...but still nothing wrong with injecting a little humour into the proceedings. I thought I was just getting shunned cos people were jealous of my rare Type UK Prodrive (only 312 left on the road) LOL So far to date including buying the actual car...the entire project only owes me £800...plus £500 for a 2.5 litre WRX engine which is actually an Sti casting block...putting in EJ257 pistons conrods and crank to convert to full EJ257 spec then I am looking at about £2000 on the road albeit running a 5 speed box for the short-term as I haven't been lucky enough to find someone selling one who doesn't know the value of it LOL But not bad so far for a potentially £5,500 motor.
Attachment 74224 |
Originally Posted by rob84
(Post 11648233)
I have it. But I have it on discs. I also have the Jdm epc too.
Thanks so much for replying...how did you do the install? I can't get it to show anything past G10? Any advice is gratefully received |
|
Originally Posted by Raptorman
(Post 11648230)
It's not jdm so no one really cares.
seen your whip mate and I am well jel :lol::lol::lol::lol: |
Originally Posted by Sti Prodrive Edition
(Post 11648243)
seen your whip mate and I am well jel :lol::lol::lol::lol:
And which "whip" of mine did you see? Perhaps the green classic wagon in my profile which was sold over a year ago and I just haven't changed the pic. I can see you are going to fit in just fine. |
Originally Posted by Sti Prodrive Edition
(Post 11648236)
Thanks so much for replying...how did you do the install? I can't get it to show anything past G10? Any advice is gratefully received
Mine follows a path c:\subarucd\sfcdlr2 and 3 |
Although there are a lot of people on here with helpful knowhow, there are not a lot with a sense of humour!
I thought you're 2nd post was quite funny ! Regarding your actually issue though.... Not a clue! |
Originally Posted by rob84
(Post 11648291)
You have to go into the setup program after installing and point the directory to the installed Subaru folder otherwise it wont read anything that's been installed
Mine follows a path c:\subarucd\sfcdlr2 and 3 Cheers Rob. Will give it a whirl. Love your motor by the way...very very nice spec :notworthy |
Originally Posted by Sti Prodrive Edition
(Post 11648320)
Cheers Rob. Will give it a whirl. Love your motor by the way...very very nice spec :notworthy
|
Originally Posted by Raptorman
(Post 11648247)
You obviously don't get the joke but that's fine.
And which "whip" of mine did you see? Perhaps the green classic wagon in my profile which was sold over a year ago and I just haven't changed the pic. I can see you are going to fit in just fine. |
Originally Posted by rob84
(Post 11648324)
Cheers But I sold the white hatch at the end of January and bought a new 2015 sti :luxhello:
You lucky fecker ;-) They are nice...There's a black one near me...They look a bit evo-y but still look mean as hell :thumb: |
Originally Posted by Sti Prodrive Edition
(Post 11648358)
You lucky fecker ;-) They are nice...There's a black one near me...They look a bit evo-y but still look mean as hell :thumb:
https://farm9.staticflickr.com/8664/...4bcafca3_c.jpgUntitled by Rostle84, on Flickr |
I've had a thought, you say you cant get past model code g10, have you tried using your vin number instead. I'm assuming your clicking the model code box and then g10, I've tried mine and it only shows g10 and b11 but My vin search shows the classic right through to latest saloon
|
She's a beauty Rob...nice one...well done mate.
|
Just had a look my Japanese EPC has G11 model code option and shows the prodrive style bumpers. My uk epc only has g10 model code. but if you vin search it should work
|
Thanks again Rob...will try now. Cheers
|
Nah that doesn't work either Rob...I am using the 17 digit number and it comes up vin unacceptable? If I just had the original discs and not my downloaded ones then I reckon I would understand it all better as I have the pdf manual which says how to install but on my downloaded isos I don't know which is which...bugger lol
|
At last...Fast ii EPC fully functional...Cheers Rob
Originally Posted by rob84
(Post 11648371)
I've had a thought, you say you cant get past model code g10, have you tried using your vin number instead. I'm assuming your clicking the model code box and then g10, I've tried mine and it only shows g10 and b11 but My vin search shows the classic right through to latest saloon
|
All times are GMT +1. The time now is 09:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands