330mm kits with AP 6 pots £1250
We are offering a few of our 330mm brake kits at £1250 , kits come complete and ready to fit , includes-
AP CP7040 black 6 pot calipers Godspeed 330mm x 30mm grooved discs with black anodised aircraft spec alloy bells Godspeed aircraft spec black anodised alloy brackets , with bolts. Either DS2500 or PF Z rated pads We make this kit with maximum offset bells so will clear just about every 17" wheels , it is a straight forward bolt on kit requiring no modifications. We use the latest style AP calipers with the proper dust sealing , so as well as being a very capable powerful caliper, they are very reliable and need no cleaning care to stop the Pistons dusting up. We even offer a 12 month guarantee on our discs against warping even if you do track days http://img.photobucket.com/albums/v1...pss3vgfv2i.jpg It doesn't get any better than this for the price Any questions please ask. We take all major debit and credit cards , PayPal or bank transfer . Shipping to a mainland UK address is £15 , highlands , N & S Ireland £22 , most of Europe £29.50 , please ask for a quote to anywhere in the world Cheers Ian 01656 723060 |
Do you do any other sizes. (Larger)
|
Can offer you our 355mm kit for £100 more
|
You have a PM
|
Do u do finance?
|
Originally Posted by Godspeed Brakes
(Post 11605763)
Can offer you our 355mm kit for £100 more
|
Originally Posted by b3nmw
(Post 11605953)
Do u do finance?
Originally Posted by cookstar
(Post 11605966)
Excellent. :thumb: do you do a matching set for rear?
Cheers Ian |
Originally Posted by Godspeed Brakes
(Post 11605973)
We don't sorry, only buy now pay now ;)
We can offer you grooved rear discs to match , or supply you a full AP rear kit Cheers Ian I think I'd prefer the rear APs. What options are available for rears please. |
AP offer a one piece disc , along with there 4 pot calipers for the rear , I'll get a current price for you tomorrow, is it a classic you have as its a different kit for early and later cars
Cheers Ian |
Originally Posted by Godspeed Brakes
(Post 11605977)
AP offer a one piece disc , along with there 4 pot calipers for the rear , I'll get a current price for you tomorrow, is it a classic you have as its a different kit for early and later cars
Cheers Ian |
Originally Posted by cookstar
(Post 11605982)
I have a 99 classic, but.. With Newage STI rear hubs to suit 6 speed conversion.
Cheers Ian |
Originally Posted by Godspeed Brakes
(Post 11605987)
Ok I'll get you a price tomorrow, the later kits actually use a larger disc , and are cheaper than the early smaller kits
Cheers Ian |
Hi Ian,
Spoke a few months ago about your AP Racing CP9040 kit. Is the CP7040 Kit acceptable for hard track/competition use (IE Piston seals adequate etc) Is this kit available with Genuine AP discs? Are your discs available yet with J-Hooks? What pads would you recommend for Track use? Ready to order this week, just want the best bang for buck :-) Sorry for all the questions :-) Tom |
Originally Posted by b3nmw
(Post 11605953)
Do u do finance?
Haha brakes on the Chucky! Love it! |
[QUOTE=Godspeed Brakes;11605973]We don't sorry, only buy now pay now ;)
No probs. will require some new brakes soon though, uncertain as to what. Currently got standard brembos, with your own discs and blue stuff pads. Cheers |
Originally Posted by P1-Murph
(Post 11606698)
Hi Ian,
Spoke a few months ago about your AP Racing CP9040 kit. Is the CP7040 Kit acceptable for hard track/competition use (IE Piston seals adequate etc) Is this kit available with Genuine AP discs? Are your discs available yet with J-Hooks? What pads would you recommend for Track use? Ready to order this week, just want the best bang for buck :-) Sorry for all the questions :-) Tom |
Originally Posted by P1-Murph
(Post 11606698)
Hi Ian,
Spoke a few months ago about your AP Racing CP9040 kit. Is the CP7040 Kit acceptable for hard track/competition use (IE Piston seals adequate etc) Is this kit available with Genuine AP discs? Are your discs available yet with J-Hooks? What pads would you recommend for Track use? Ready to order this week, just want the best bang for buck :-) Sorry for all the questions :-) Tom We have a few customers using this kit for Tarmac rallying , I'm using the 7600 4 pot road calipers on my clio rally car , as the dust seals are big as they cover the full piston just about , they can melt with very hard sustained use , on my clio I didn't bother fitting new dust seals , but then it doesn't do a lot of mileage , and I have had no issues with them , I do left foot brake a lot so probably get them hotter than the average driver. You will get zero issues with the hydraulic seal , but may get issues with the dust seal with very hard use , seeing very high temps. No AP 330mm discs won't suit this setup as the pads are too wide , our 330mm rotors for this setup have a much wider pad area , we could offer this kit with either 355mm or 362mm AP discs , kits would work out about £400 more. No we don't offer our discs with J hooks , only curved grooves as in the photo. For track use , I would either go with CL RC 6 or 8's , or ds3000's , or even PF 08's , the price would vary depending on which of these you go for as they are more expensive than the DS2500's or Z rated PF's. Hope this helps Cheers Ian |
Hi Ian,
Is this a permanent deal? As ill proberly get a set in the summer? Cheers Jamie |
Originally Posted by JamieJerkovic
(Post 11608054)
Hi Ian,
Is this a permanent deal? As ill proberly get a set in the summer? Cheers Jamie Cheers ian |
Hi Ian,
Just a quick thank you for your time, and answers on the phone earlier - top man! I will call tomorrow/Thursday at the latest to order myself a set as discussed. Many thanks :-) |
Originally Posted by P1-Murph
(Post 11608248)
Hi Ian,
Just a quick thank you for your time, and answers on the phone earlier - top man! I will call tomorrow/Thursday at the latest to order myself a set as discussed. Many thanks :-) |
Hi Ian
Was there any news about the classic AP 4 pot rears for 180 hubs or is there any way to make classic AP 4 pot rears for 160 hubs fit R180. |
Originally Posted by bwanaiguana
(Post 11614776)
Hi Ian
Was there any news about the classic AP 4 pot rears for 180 hubs or is there any way to make classic AP 4 pot rears for 160 hubs fit R180. No , you can do it the other way around , 180 to a 160 swap with thicker handbrake shoes , but you cannot go from a smaller 160 handbrake to a larger 180 handbrake Cheers Ian |
Till the end of Feb we are offering a free Braided hose kit and dot 5.1 fluid with all orders for these kits
|
Is this a straight swap for the classic 4 pots, and what is the usual RRP for this kit?
|
Originally Posted by Zuber
(Post 11630540)
Is this a straight swap for the classic 4 pots, and what is the usual RRP for this kit?
Yes its a straight forward fit , the full retail price is £1650 Cheers Ian |
Hi Ian, so that would be £1265 all in to include UK lowland delivery and you get free braided hose kit and dot 5.1 thrown in on the deal, I'm seriously wanting to pull the trigger here!
|
Originally Posted by Zuber
(Post 11631130)
Hi Ian, so that would be £1265 all in to include UK lowland delivery and you get free braided hose kit and dot 5.1 thrown in on the deal, I'm seriously wanting to pull the trigger here!
Cheers Ian |
Thanks Ian, for a fantastic deal,looking forward to trying these 6 pots out.
|
Just a quick question Ian if you know that is, I have the Porchse calliper and 356mm AP disc set up that PowerStation sold fitted to my fronts, are the callipers interchangeable using the same bracket do you know, Reason I ask is I have AP rear 4 pots and was wanting a matching set of 6 pots for the front...it's not going time as simple as just getting the 6 pot calliper and swapping it for the Porsche one or is it or am I going to need brackets and different bells too?
|
All times are GMT +1. The time now is 08:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands