Bugeye 2001 clock
 

Need one of these whether it just be the clock or wth the plastic surround as mine has gone :confused:

http://i523.photobucket.com/albums/w...pstvc2hhwq.jpg

We have plenty in stock pm me if needed

Easy enough to fix too matey if you have a soldering iron.

This is a common failure & is very easy to fix, all you need is a small screwdriver, a soldering iron & a drop of solder. :thumb:

This is the guide I used to fix mine, one word of advice do both ends because I only did the one end on mine that had failed & ended up having to do it all again a month or so later when the other end did the same, that was nearly 3 years ago now & it has been fine ever since. :thumb:

http://subarudiymodifications.blogsp...clock.html?m=1

Thanks. I wasn't aware this is a common problem. I will give this a go!

Gave this a go today and it didnt wotk for me.

Strange!, did you do both ends & make sure all the solder melted properly?

Have you checked the fuse?

Fuse is fine, not to worry I bought a replacement now.

Thanks