best turbo for 600hp
Looking for a turbo to make 600hp or there abouts with uber fast spool.
Thanks just looking for advice really. |
Stop smoking crack
|
A lot of people will ask what supporting mods you have got first
As that will help people help you to choose the best suitable turbo Steve |
here you go, get the wallet out : https://www.scoobynet.com/car-parts-...iles-only.html
|
Engine specs are as follows.
Ej25 rebuilt and forgedn 750cc injectors Fuel pump upgrade Blitz nur spec exhaust Custom short route piping fmic Hks fmic Hks cam belt Rcm crank, alternator and power steering pulley Air con delete Td05 been rebuilt Mishimoto rad thew irelivant bits like samco hoses and just bits that make it look better Cant think of anything else at the minute. |
Originally Posted by yabbadoo4
(Post 11586977)
here you go, get the wallet out : https://www.scoobynet.com/car-parts-...iles-only.html
|
then you have your answer m8 :D
|
Plan to change some of the spec anyway
|
Is this a real laggy turbo? Anyone had it before. Also i will be needing rotated down pipe
|
What's been done to your block so far? Has it been closed decked? You will need to bin them 750cc injectors aswell
|
Nice shouldn't be a problem then
Take it your using a 6 speed and suitable clutch with this planned power? Steve |
Yes closed deck and fully forged. As for things gearbox wise i plan to do a 6 speed swap from a new age so my current clutch exedy twin plate will have to go im sure
|
Only really want to do more head work i.e. springs retainers valves and ect.. might change a thew parts for named brands alot of ebay jobby shiny bits from the bloke i brought it from
|
what brake set up do you have?
|
New age brembos on rear and ap racing 6 pot front
|
cool, decent brakes will obviously be needed at that power level. is it a classic or newage?
|
Classic type r
|
Need to sort body work out first as its in a bad way but after that turbo is next and all the things that go with it
|
So basically you have nothing to support the turbo like engine, injectors or gearbox.....
|
Originally Posted by benboxall11
(Post 11587024)
Yes closed deck and fully forged. As for things gearbox wise i plan to do a 6 speed swap from a new age so my current clutch exedy twin plate will have to go im sure
|
What do you need to know mate if you read carefully i have 750cc injectors but have come to here for advice for what i need and as said 6 speed conversion is going in i dont see what makes you think im not to sure about the engine
|
And yes it was converted cdb
|
Originally Posted by fat-thomas
(Post 11587043)
So basically you have nothing to support the turbo like engine, injectors or gearbox.....
|
If it helps i can add specs of the internals? Just want the best advice and if this will help i will provide
|
Originally Posted by benboxall11
(Post 11587070)
read full thread mate
|
Originally Posted by benboxall11
(Post 11587068)
And yes it was converted cdb
|
To be fair thats one thing i dont know was just how i bought it
|
What heads etc?
You seem to like branding, just because stuff is branded HKS, doesn't mean it's great. |
Again mate how i brought it i havent personally done alot to it this is how i bought it
|
Heads have been flowed thats all
|
All times are GMT +1. The time now is 10:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands