Fuel filler door catch.
Been a while since I visited the site and I know this request has seemingly been covered in the past, but read on. ;-))
I am looking for the name and part number for the little plastic catch, which incorporates a single leaf-spring, fits on the inside of the fuel filler door on a 1999 Classic wagon. Hope someone can help please. |
I would say it's number 11 from the list shown as 3 in a circle on the diagram but it's hard to make out.
http://opposedforces.com/parts/impre...llustration_1/ |
I got one of these from MB developments on here, if it's the catch that goes on the opposite side of the hing. Can't remember how much but it was a cheap as chips.
|
Originally Posted by FMJ
(Post 11571967)
I would say it's number 11 from the list shown as 3 in a circle on the diagram but it's hard to make out.
http://opposedforces.com/parts/impre...llustration_1/ |
Originally Posted by Davec30
(Post 11572006)
I got one of these from MB developments on here, if it's the catch that goes on the opposite side of the hing. Can't remember how much but it was a cheap as chips.
Just to be clear, it is the catch that is fitted to the door not the retracting button within the fuel filler space. If this is the one you bought can you send me a link to MB Developments please. Cheers. |
Originally Posted by Fiasco
(Post 11572304)
Thanks Dave, You don't happen the have the invoice with the part number on?
Just to be clear, it is the catch that is fitted to the door not the retracting button within the fuel filler space. If this is the one you bought can you send me a link to MB Developments please. Cheers. Where are you based? |
Thanks Dave I will look him up.
I am near Tonbridge in Kent. ;-)) |
I'll check to see if I have one. I got a new filler flap but I'm not sure if there's one on it. If there is you can have it for the price of posting and a pint
|
Originally Posted by FMJ
(Post 11571967)
I would say it's number 11 from the list shown as 3 in a circle on the diagram but it's hard to make out.
http://opposedforces.com/parts/impre...llustration_1/ Clip (fuel lock) 57651FA040 |
Just seen you have a wagon. If someone can confirm the catch is the same as a 2000 saloon then I have one here!
If you want it let me know. |
Hi Dave
Sorry for the pause. Been looking for a comparison photo of the two models and the fuel door looks the same to me on both. Can you send me a photo of the catch you have so that I can see if it looks the same as mine. Wonders of modern technology and all that. ;-)) BTW Is it new? |
Originally Posted by 2pot
(Post 11572447)
Correct.
Clip (fuel lock) 57651FA040 |
|
Hey, if the other guy doesn't have it off you then I will please. Must be common on the classics! |
If you pm me a PayPal link that would be OK. Or WHY? |
So does it just slide onto the door's protruding 90-deg. metal tang thing, then -- so that said remote-release will then work?! |
Sorry to mess you about buy I have found a brand new one locally. Hopefully Ellie will buy this one from you and all will be well. Thanks Dave and all for your help and for your interest. |
..And if Ellie should forego it for any reason, then can I be next in line?! :D
|
Originally Posted by joz8968
(Post 11573244)
My own MY1999 is without this bit, too (ergo the remote door-release lever from within the car is currently 'unemployed' lol). :(
So does it just slide onto the door's protruding 90-deg. metal tang thing, then -- so that said remote-release will then work?! Seems I may have started a marketplace here...... |
Originally Posted by Fiasco
(Post 11573294)
Yes it does......they are a bit fragile around the bit where the spring fits to the plastic. Hence my need for a replacement. ;-))
Or do the two bits come as an assembled single module i.e. one Subaru part no.? |
Originally Posted by joz8968
(Post 11573295)
- Does the actual metal spring bit come separate to the plastic body bit then - i.e. are they two separate Subaru items, as regards parts numbers?
Or do the two bits come as an assembled single module i.e. one Subaru part no.? |
Cheers mate! :)
|
Originally Posted by joz8968
(Post 11573302)
Cheers mate! :)
http://www.ebay.co.uk/itm/SUBARU-ISU...item519806a5e9 |
Originally Posted by joz8968
(Post 11573295)
- Does the actual metal spring bit come separate to the plastic body bit then - i.e. are they two separate Subaru items, as regards parts numbers?
Or do the two bits come as an assembled single module i.e. one Subaru part no.? |
Originally Posted by Fiasco
(Post 11573322)
Single module, yes.
|
Originally Posted by 2pot
(Post 11573315)
- But literally just had a response from Unity, Subaru Leic. and they have it in. :) £2.07 + VAT. :cool: (Can't believe it - knowing main stealers, I assumed it would've been £30+ :rolleyes:) |
Originally Posted by joz8968
(Post 11573348)
Have enquired, thanks.
- But literally just had a response from Unity, Subaru Leic. and they have it in. :) £2.07 + VAT. :cool: (Can't believe it - knowing main stealers, I assumed it would've been £30+ :rolleyes:) |
'Tis a small world, for sure. :thumb:
|
All times are GMT +1. The time now is 08:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands