ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   ScoobyNet General (https://www.scoobynet.com/scoobynet-general-1/)
-   -   JDM 2.0 STI or UK 2.5 STI (https://www.scoobynet.com/scoobynet-general-1/1015766-jdm-2-0-sti-or-uk-2-5-sti.html)

Aaron_P85 24 November 2014 03:54 PM

JDM 2.0 STI or UK 2.5 STI
 
Hi all..
Having previously owned a JDM classic STI a few years back, and a friend recently buying two Type R's fresh from Japan (one to sell) I've got the Scooby itch BIG time. I currently own a completely standard CLS 500 and love the car but will not be able to keep this AND an impreza... so.... my dilemma...

I've been looking at Hawkeye JDM STI 2.0's.... depending on the auction these can be gotten for anyway from £4.5 to 9k + transport/insurance/taxes/registration ETC ETC ontop of a 6-8 week wait....I'm an impatient **** and don't fancy waiting... so that got me looking at the hawkeye UK stis... but they have a 2.5 block and having a quick scan of the interweb it appears this engine is very weak, all the cars im looking at are sub 60k miles... is this the magic mileage where things go pop?

JDM or UK????

Few cars I've seen in the UK I like the look of...are ANY of them known to the forum? would like to pick the brains of previous owners/go through their build threads eTC

This one has a few choice mods... alot of mods for little mileage?

This one I like, but not the mesh so much.... LOVE white impreza's to, but can I agree with the price increase just for the paint?

This one states it has already had a forged rebuild, but no mention of whom done it...yes I could ask, but I don't like wasting people's time, especially when I haven't narrowed down a colour yet (White or Grey incase you hadn't realised)

Anyway, you get the idea..... JDM or UK? I couldnt afford a rebuild £5k? if they're prone to popping...I don't bray my cars everywhere, but I also don't want to be scared of hitting the loud pedal...

Has anybody had any experience with the mentioned dealerships? I'm always dubious..

all comments welcomed and thanks in advance!

BBB3 24 November 2014 04:15 PM

Use the search mate, it's all what ever get asked on here.

lloydsound 24 November 2014 04:55 PM

Let me know where you see a jdm hawkeye for 4.5k and I'll consider getting one too

mickeymouse 24 November 2014 04:56 PM

If buying a 2.5 then either get a ready made forged or factor in atleast 4k..

Prob best to avoid Cheshire performance! (Search for them..you'll understand)

I would also suggest that if your spending that much monies.. Then just get an AA inspection or similar... IMHO worth it's weight in gold.

BBB3 24 November 2014 05:01 PM

Find a JDM hawk for 9k let us know :)

Trinity 24 November 2014 05:23 PM

Here we go again...:)

Just wait...

RAF1 24 November 2014 05:40 PM

£4.5k in Japan he means and then adding on all other costs involved like shipping / agent fess / taxes / vat / custom / registration etc..

richie001 24 November 2014 05:50 PM

Buy an Evo 9 :thumb:

jameswrx 24 November 2014 06:18 PM

Just be patient and wait for one to come up that's had a proper engine build, or a JDM to come up over here. Looking at the prices in Japan I can't see you'd be better off buying one from there when it's finally on the road here.

BBB3 24 November 2014 07:34 PM


Originally Posted by richie001 (Post 11567632)
Buy an Evo 9 :thumb:

Buy a spec c :thumb:

urban 25 November 2014 07:59 AM


Originally Posted by Aaron_P85 (Post 11567581)
is this the magic mileage where things go pop?

2.5's can go bang whenever they feel like it.
Personally I'd avoid a standard one, get a forged motor.

Aaron_P85 25 November 2014 09:07 PM

Thanks for the replies people...

atleast I've decided now that it has to be white, and a hawkeye... if I get JDM I'll get standard unequal headers and have them ported so I can get hte burble back...

If I get a UK one, i'll start saving for a forge rebuild :( What sort of build would I be looking at if there was nothing wrong with the engine but drove it into, for argument sake, API/Engine Tuner for a forged rebuild? nowt fancy or upgraded?.... prevention better than cure and all that.... I'm hoping it's cheaper than waiting for the engine to shat itself then rebuild from there....

lloydsound 25 November 2014 09:13 PM

What about silver? http://www.hurstcars.co.uk/used-cars...01409147382066

RS_Matt 25 November 2014 09:15 PM

How much for a JDM Hawk WRX? Can Litchfield etc source one?

plenty 25 November 2014 09:17 PM

There's a white 55 plate JDM hawk on PH for £12,799. I have no connection with the seller.

Aaron_P85 25 November 2014 09:25 PM

well spotted!!! £12,799 is out my budget alass but bloody good find...does make you wonder why all that work was done within 1000 miles and then being sold... I assume RCM's headers are unequal?

mickeymouse 25 November 2014 09:34 PM


Originally Posted by Aaron_P85 (Post 11568479)
Thanks for the replies people...

atleast I've decided now that it has to be white, and a hawkeye... if I get JDM I'll get standard unequal headers and have them ported so I can get hte burble back...

If I get a UK one, i'll start saving for a forge rebuild :( What sort of build would I be looking at if there was nothing wrong with the engine but drove it into, for argument sake, API/Engine Tuner for a forged rebuild? nowt fancy or upgraded?.... prevention better than cure and all that.... I'm hoping it's cheaper than waiting for the engine to shat itself then rebuild from there....



Don't quote me as I'm no expert... But I'm not sure if fitting unequal length manifold to a JDM is a straight swap...??

One of the other lads will be able to help better:thumb:

Get the forged rebuild done by a reputable builder.. Like the ones you've just mention.. Your looking at around 3.5k minimum.. You'll want other things whilst it's apart like updated head bolts, modified oil pump, up rated head gaskets etc... The list is long... Very long... IMHO I wouldn't do it again without getting the block closed... Stupid me:cuckoo:

Maz 25 November 2014 09:42 PM


Originally Posted by RS_Matt (Post 11568491)
How much for a JDM Hawk WRX? Can Litchfield etc source one?

Ask them.

Trinity 25 November 2014 09:49 PM


Originally Posted by Aaron_P85 (Post 11568479)
Thanks for the replies people...

atleast I've decided now that it has to be white, and a hawkeye... if I get JDM I'll get standard unequal headers and have them ported so I can get hte burble back...

Thats the most retarded thing I have ever heard.

You have NO IDEA what a JDM sounds like!:brickwall

mickeymouse 25 November 2014 09:53 PM


Originally Posted by Trinity (Post 11568545)
Thats the most retarded thing I have ever heard.

You have NO IDEA what a JDM sounds like!:brickwall



So instead of ripping sh11t out of him... HELP him:cuckoo:

scoobyboy1 25 November 2014 10:00 PM

You want a JDM hawk and in white??? Hope you got a lot of money!! Think you will struggle to pick one up for less then £13-14k. Even a white JDM blob your looking over £10k+.

£9K might get you a early blob JDM, but cant see it being white unfortunatly!!!

scooby k 25 November 2014 10:28 PM

I was looking at the white jdm hawk too, it been on there a while.

harrisard 25 November 2014 10:34 PM

[QUOTE=Aaron_P85;11568479]

atleast I've decided now that it has to be white, and a hawkeye... if I get JDM I'll get standard unequal headers and have them ported so I can get hte burble back...







A JDM hawk is twin scroll and have equal length headers which is why they have no burble and I think buying one and changing that set up would be a shame as that's what a JDM is all about!! So you would probably be best off finding a forged UK hawk imho!!

Harri

Mark_S 25 November 2014 10:36 PM


Originally Posted by lloydsound (Post 11568489)

Ruddy hell, that's my old car!

joe v3sti 25 November 2014 10:45 PM


Originally Posted by RS_Matt (Post 11568491)
How much for a JDM Hawk WRX? Can Litchfield etc source one?

If you were going to go to the hassle of importing, surely you would import the STI?

lloydsound 26 November 2014 04:09 AM

Is the burble something that can be recreated with an exhaust?

RS_Matt 26 November 2014 09:49 AM


Originally Posted by joe v3sti (Post 11568614)
If you were going to go to the hassle of importing, surely you would import the STI?

Nope. JDM Newage WRX will be a far faster car and a lot more usable once tuned up to 360bhp (460 STI equivalent).

I can't think of a better car to own tbh now knowing what I do about them.

joe v3sti 26 November 2014 09:53 AM


Originally Posted by RS_Matt (Post 11568764)
Nope. JDM Newage WRX will be a far faster car and a lot more usable once tuned up to 360bhp (460 STI equivalent).

I can't think of a better car to own tbh now knowing what I do about them.


C'mon Matt you can't be serious pal?

Trinity 26 November 2014 10:08 AM


Originally Posted by lloydsound (Post 11568686)
Is the burble something that can be recreated with an exhaust?

My JDM burbles beautifully. It'll cost you a Genome exhaust system.

and dont destroy the better JDM engine at great expense by losing the manifold and replacing it with a poverty spec one, that is quite retarded. If your bothered about a sound, get a CD, record a poverty spec UK car, then put it on on your CD player.

As soon as youve heard a JDM redline formula one scream, that silly burble addiction will of gone faster than a prostitute that just got paid.

joe v3sti 26 November 2014 10:11 AM

I agree with trinity, If I could have run avcs heads in s2 I would have gone twinscroll, the but le does nothing for me


All times are GMT +1. The time now is 07:00 AM.


© 2024 MH Sub I, LLC dba Internet Brands