ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Lighting and Other Electrical (https://www.scoobynet.com/lighting-and-other-electrical-14/)
-   -   horn upgrade (https://www.scoobynet.com/lighting-and-other-electrical-14/1014122-horn-upgrade.html)

mikey111111 26 October 2014 09:19 AM

horn upgrade
 
Hi All,
Anyone upgarded horn for more noise?:notworthy

JamieJerkovic 26 October 2014 09:57 AM

Hi mate, go for a pair of hella supertones.. 10x better than the oem horn

See them just through the grill depending where you mount them.

http://i740.photobucket.com/albums/x...psjdxnse0i.jpg

mikey111111 26 October 2014 10:13 AM

Horns upgrade
 
Thanks Mate
Hela it is
ta.

Cpt Jack Sparrow 26 October 2014 10:36 AM


Originally Posted by mikey111111 (Post 11547538)
Thanks Mate
Hela it is
ta.

Don't fall for the cheap fake ones on eBay, buy genuine for a few quid more:thumb:

myblackwrx 26 October 2014 02:40 PM

I went for the PIAA horns from Scoobyparts.

daddyscoob 27 October 2014 08:37 PM

I got some from this place. Over this side of the water but a genuine Hella supplier
http://www.ebay.co.uk/itm/GENUINE-HE...e=STRK:MESE:IT

Flat4x4-again 03 November 2014 06:50 PM


Originally Posted by myblackwrx (Post 11547678)
I went for the PIAA horns from Scoobyparts.

Easy to fit ?

myblackwrx 03 November 2014 07:15 PM

From what I remember yes they were easy to fit as they come with wiring and instructions.

Mine are mounted just behind the front grille badge and to the left and the right so the 'hard' part was making a bracket for them.

Flat4x4-again 03 November 2014 08:05 PM

Thanks :thumb:

abre 06 November 2014 08:30 PM

I've got PIAAs and they were easy to fit.

I used the original center mount for the right horn and there was a matching hole on the other side of the center strut that I used for the left horn. You can feed both horns from the original right horn feed, but if you're going to remove the second horn from the offside front then you can pick up a feed from here and run a wire to the second horn.

Tip... You can get to this horn through the side vent in the bumper if you aren't removing the bumper, but you'll need to remove the grill to get to the centre horn, which is held in place by 6 screws 4 of which are a challenge to get to with the bumper on, but it is possible!

I originally left the bling PIAA stickers on the horns, but after a year I didn't like the look so removed the stickers so they are now just black and blend into the grill and radiator.


All times are GMT +1. The time now is 01:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands