New turbo 2000 sti replica build
 

well so far ive bought the car and thats as far as its gone after a v5 6 interior to start as the one in this is beyond cleaning ! the woman had cats 1 owner from new 103k rough all round bone stock but a solid engine and turbo so im happy :)

http://i61.photobucket.com/albums/h4...ps9dcefae9.jpg

http://i61.photobucket.com/albums/h4...ps1c909742.jpg

Why a sti replica, in what respect are you making it a sti rep.....

Want to start with the arches, will cost you more than you think to create a replicater, just enjoy the car now and then buy a sti

cost is not a issue im going to respray the whole car anyway and ill do that myself as she is pretty rough replica in the sense of looks. i like the v5 look clean and subtle

are the arches wider or are you refering to the rust ..

EFA :thumb:

As above mate, you'll end up spending a fortune, but it's your money :D and if that's what makes you happy then good luck to you.:thumb:

Presumably you got it nice and cheap, the arches can be quite a big job though so I'd have a good poke around in the boot before you start, there is a thread on here posted by F1 fan showing just how bad they can be, might be worth a look before you start cutting any metal out.:thumb:

The arches are indeed a complete pig. I thought I'd cut out and repair the little bubble that was showing on mine and it turned into 3 weekends of serious cutting and welding from the outer arch skin, almost right round the edge of the inner skin, up inside the strut tower, all the way down to the very bottom of the skirt behind the bumper and finally the two corners at the bottom of the boot. I have some photos somewhere, I'll try to get them posted up later.

oh im no stranger to rust ive had 10 suzuki swift gtis and they don't rust they dissolve ! you dont know rust till you've done a suzuki lol

bodywork and maintenance are first on the list yea cheap it was ;)

http://i61.photobucket.com/albums/h4...ps2e383551.jpg
http://i61.photobucket.com/albums/h4...ps4bd3bd9a.jpg

http://i61.photobucket.com/albums/h4...ps21814c17.jpg

http://i61.photobucket.com/albums/h4...ps8eb3576b.jpg

heres one i repaired earlier lol it started off looking so innocent

Cool looks like your reasonably handy with the tin snips, put some pics up of the subaru when you start, maybe a thread in projects too.:thumb:

so i got the car up on the ramp today and was impressed with how rust free it was :luxhello: also impressed with the roomyness underneath looks eaiser to work on than i thought it would be and then i got the pry bar out


brakes all round are shot so new ones have been ordered

rear diff bishes and axle mounts are way worn changing hard feels like your being kicked in the back so they have been ordered too

found some oil leaks one is off a power steering pipe and one is somewere on the front looks like engine oil

looks like the cross over pipe ? is this common ... seems to drip on the exhuast manifold wich is worrying


http://i61.photobucket.com/albums/h4...ps01d8380e.jpg

http://i61.photobucket.com/albums/h4...psc8250857.jpg

http://i61.photobucket.com/albums/h4...ps9e034da9.jpg

thanks all advice appreciated

Looks like crossover pipe http://www.importcarparts.co.uk/part...en=&searchKey=

What bushes did you get? I need to get my diff ones done