ScoobyNet.com - Subaru Enthusiast Forum

ScoobyNet.com - Subaru Enthusiast Forum (https://www.scoobynet.com/)
-   Interior (https://www.scoobynet.com/interior-15/)
-   -   Paint code similar to newage centre console? (https://www.scoobynet.com/interior-15/1013659-paint-code-similar-to-newage-centre-console.html)

corno 17 October 2014 03:13 PM

Paint code similar to newage centre console?
 
Previous owners kindly scratched the living day life out of the grey centre console fascia on my hawk, has anyone had any luck in repainting this with a similar colour? Wouldn't mind refreshing mine a little bit :thumb:

PhilWrx100 18 October 2014 09:40 AM

Free bump as I'm interested too :) as mine is slightly damaged.

modrich 18 October 2014 09:33 PM

I had mine painted at the body shop I use, they took it to their paint supplier and they matched it, but don't know the paint code unfortunately so can't help in that respect. Some paint suppliers have a scanner that can reproduce colours but they charge about £20+paint for the privilege.

romford-boy 22 October 2014 12:05 PM

Do it yourself. The whole silver section of dash comes out dead easy (lots of how to guides online) and then you can spray paint it freely without worrying about accidentally spraying non silver parts of the interior. And because you are respraying everything that is silver you don't need to worry about an exact colour match.

I particularly recommend plastidip in matt black. Very easy to use and gives a beautiful JDM style finish.

Here is a google picture of a plastidip interior:

http://i72.photobucket.com/albums/i1...i/P4290021.jpg

corno 22 October 2014 12:49 PM


Originally Posted by romford-boy (Post 11544920)
Do it yourself. The whole silver section of dash comes out dead easy (lots of how to guides online) and then you can spray paint it freely without worrying about accidentally spraying non silver parts of the interior. And because you are respraying everything that is silver you don't need to worry about an exact colour match.

I particularly recommend plastidip in matt black. Very easy to use and gives a beautiful JDM style finish.

Here is a google picture of a plastidip interior:

http://i72.photobucket.com/albums/i1...i/P4290021.jpg

That looks really good! But how did you do the HVAC controls?

romford-boy 22 October 2014 02:36 PM


Originally Posted by corno (Post 11544940)
That looks really good! But how did you do the HVAC controls?

Not my car. In mine I left the HVAC controls silver, but it looks fine in my opinion.

You can get a transfer kit for new HVAC controls but they are (1) hard to find, and (2) apparently the symbols don't quite match up with the back lighting so can look a bit odd.

What I did do, however, was paint the hazard light in matt red.

ScoobTypeR 06 November 2014 04:46 PM

2 Attachment(s)
Ive recently done mine aswell due to a few scratches... Did the gear surround plate aswell....

corno 07 November 2014 09:38 AM


Originally Posted by ScoobTypeR (Post 11555306)
Ive recently done mine aswell due to a few scratches... Did the gear surround plate aswell....

Really like that! What was it exactly that you used?

romford-boy 11 November 2014 11:12 AM


Originally Posted by corno (Post 11555828)
Really like that! What was it exactly that you used?

Don't know about the post above, but I used Plastidip in matt black.

http://www.plastidip.co.uk/eStore/in...DL-0009&menu=0


All times are GMT +1. The time now is 02:40 PM.


© 2024 MH Sub I, LLC dba Internet Brands