Can I blank these pipes off
Long story short I am starting a little DIY project and I just want to know what all of the pipes go to from the turbo inlet hose, and if I can blank them off... I know one of them goes to the recirc valve and I currently have that blanked off... its just the others.
http://www.scoobyworx.com/ekmps/shop...005-1752-p.jpg |
Hi there
Yes you can blank them off,we run too blanked off intake pipe Thanks,Jura |
Excellent! Thanks Jura. So do I need to blank off both ends I.E the pipe on the intake and also the pipe that was on it or do I just let them breathe to atmosphere?
|
Originally Posted by SAM-UK300
(Post 11494585)
Excellent! Thanks Jura. So do I need to blank off both ends I.E the pipe on the intake and also the pipe that was on it or do I just let them breathe to atmosphere?
Please check which pipe you want to blank off,I think on yours you have probably still evap and in this case you will need to do,evap delete I think on the Nasioc is good guide how to do Thanks,Jura |
It's a 2002 bugeye wrx and I currently only have the recirc valve blanked off, everything else standard. I googled evap remove and not much came up...
|
Originally Posted by SAM-UK300
(Post 11494597)
It's a 2002 bugeye wrx and I currently only have the recirc valve blanked off, everything else standard. I googled evap remove and not much came up...
https://www.google.co.uk/search?q=ev...m=122&ie=UTF-8 Thanks,Jura |
Top man, thanks
|
All times are GMT +1. The time now is 01:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands