++++ BREAKING 420BHP 1998 STI, JDM 6 SPEED, B.C's, GT SPEC, 740cc, BREMBO, DEFI ++++
 

Hi all here we have my own car in for breaking the vehicle has been built and perfected over the past 3 year the spec and parts list is great spec/parts list below the vehicle is mechanically 100% it has never missed a beat, colour code for all panels is 52D.

ENGINE:
forged 2.5 with sti 4 cylinder heads and loads of cosworth bits pump gaskets and studs etc this has only done 5000 miles due to only being a weekend toy. Full parallel fuel rail set up with fuel lab pressure regulator and Nismo 740cc injectors with rails that where sourced from rcm 3 years ago, AFP TD05 20g, 3 bolt gt spec headers (dei wrapped), Large fmic, Silicone intake pipe, HKS/zero sprts induction kit, GEMS ECU with anti lag, Refurbished inlet manifold, GFB blue light weigh pulleys, RCM catch tank.

RUNNING GEAR:
JDM version 7 sti full 6 speed transmission (that has just been fitted with a as new spec c gear kit form teg) plus R180 hubs and shafts all round from a 2004 sti, Brembos calipers front and rear with god speed disc's and mintex pads, B.C Coilovers, 24mm Whiteline rear anti roll bar with billet drop links, whiteline anti lift kit, H-Brace, Rear diff brace, 18" O.Z superleggeras with falken fk452 tyres, alloy wishbones, AP racing organic clutch with lightened flywheel

INTERIOR / EXTERIOR / STYLING:
STI 7 jdm front and rear seats, STI 8 steering wheel, Defi gauges with all sensors and pod smoked face blue illumination, STI RA roof flap (complete kit) Zero/sports side skirts, STI rear lamps, Alloy bonnet, Zero/sports bonnet undertray, STI replica spoiler, 3D facelift grill, Zero/sports slam panel cover,

AS USUAL CONTACT US ON THE THREAD OR VIA PM IF ANYTHING IS NEEDED, I SOMETIMES STRUGGLE TO GET TO THE COMPUTER TO ANSWER THESE, SO I AM SORRY IF THERE IS A DELAY IN REPLY I WILL GET BACK TO EVERYONE AS SOON AS POSSIBLE, FOR A QUICK REPLY CALL US ON 01253 871188 AS WE ARE A VERY BUSY TEAM DOWN HERE

THANKS SCOTT

http://i1118.photobucket.com/albums/...ps2a43d216.jpg

http://i1118.photobucket.com/albums/...ps79dc6da3.jpg

http://i1118.photobucket.com/albums/...ps18f06ded.jpg

http://i1118.photobucket.com/albums/...psbc5d7b10.jpg

http://i1118.photobucket.com/albums/...pscb72f40a.jpg

http://i1118.photobucket.com/albums/...ps0937c890.jpg

http://i1118.photobucket.com/albums/...psd51076cc.jpg

http://i1118.photobucket.com/albums/...psb0fc81ed.jpg

http://i1118.photobucket.com/albums/...ps81e9468f.jpg

http://i1118.photobucket.com/albums/...ps824f12e4.jpg

http://i1118.photobucket.com/albums/...ps27063a5b.jpg

http://i1118.photobucket.com/albums/...ps9335bd37.jpg

http://i1118.photobucket.com/albums/...ps29819539.jpg

http://i1118.photobucket.com/albums/...ps5d4b2139.jpg

http://i1118.photobucket.com/albums/...psd5d6d20f.jpg

The car was planned to be used a sprint car but another car was built/finished in time so there is a few extras/spares that where sourced but not fitted and also a few spares that where already replaced,

induction kit for 97/98 jdm maf
http://i1118.photobucket.com/albums/...ps35cc9aaa.jpg

swirl pot with bosch 044 and sytec bracket and fuel lab filter
http://i1118.photobucket.com/albums/...psc474957d.jpg

BRAND NEW COMPBRAKE 4 pot caliper with bells and rotors plus hawk pads (one mounting bracket is missing but can be bought from compbrake for £50)
http://i1118.photobucket.com/albums/...ps55fa956e.jpg

800cc injectors
http://i1118.photobucket.com/albums/...psf3ddfd15.jpg

another set of parallel rails
http://i1118.photobucket.com/albums/...psa7fc0fd3.jpg
http://i1118.photobucket.com/albums/...psa4ca7240.jpg

GT30 billet (stock mount) made 450bhp on previous car
http://i1118.photobucket.com/albums/...ps4d4b0b99.jpg

How much is the gt30? How many miles has it done, is there any play in it?

BC's delivered to Coventry???

How much for the 18`s ? I dont need the tyres.


Thanks

Do these roof vents fit the newage? ....ie interior trim side?

£950 there is un normal movement in the shaft no smoke/oil passing through

£420 delivered to you door :thumb:

£500 with tyres or £420 without


i have seen a couple fitted to the newage models over the years so i presume they do fit

scott...

How much for the injectors?

£235 delivered for the phase 2 nismo 740cc injectors

scott...

The induction kit in the first couple of pics, is that for sale?

sorry no the rcm one is sold

scott...

How much for the complete Jdm 6 speed conversion to fit in my classic?

How much is the roof vent and any pictures of the interior side of it Scott.....

What's included in the 6 speed set up ?
Will it be everything I need to convert my v5 classic ?

Price for it please, and for injectors with braided fuel lines

Which model and spring rate are the BC's? What's the condition like? Any pics?

How much for blue pulley set and do you have any adjustable top mounts ?

How much for the headlights and sidelights?

how much for the swirl pot?
And steering Wheel?

Seperate prices on DoubleDin Centre console piece & Sti rear lights please?

sss

gearbox, propshaft, cradle, selector, r180 3.9 diff £2250 just had a new spc c gearkit fitted

roof vent £200 interior trim is like new no damaged

gearbox, propshaft, cradle, selector, r180 3.9 diff £2250 just had a new spc c gearkit fitted

injectors pus rails and lines £400

sorry sold

gfb pulleys £80 with matching belt to suit small pulley

sorry sold

swirl pot £50 steering wheel £125

silver center console £40, sti rears £130

scott...

Scott, HOw much are you looking for on the GT Spec Headers delivered?

Just need the ph2 injectors and braided lines as I've got the rails
Got any paperwork for them ?

Also what price is the 20g ?
Any photos of it
Cheers

hi bud the headers are £300 plus £10 shipping they arewrapped in dei wrap

injectors and lines are £350
20g turbo is £400 no photos at the moment as its still fitted

scott...

please check pm re turbo and headers and alternative fmic
thanks

Are the 740cc injectors still available?

How much for the lightened flywheel?

How much for the 20g scott?

Is it billeted? Any play in the shaft and will It be a direct fit to a hawk sti?

Thanks

Steve

Price posted for the full Brembo set?

how much for the engine?