Boot debadge glue
Hello i brought a boot which had been debadged and you can still the the outline of the letters any ideas how to get this out? Also will be removing the wrx badge whats the best way to do this?
|
Use a good polish to remove the old glue outline or a bit of t/cut.
To remove the Wrx badge use a hair dryer/ heat gun and some dental floss. Just be carefull how hot you get the paint |
I used a bit of turpentine and a cloth, came off straight away then washed the paintwork immediately with car shampoo to remove the turps!
|
Use a good tar remover first to lift any remaining adhesive then i usually clay the area then use a polish to buff up any remaining out line off where the badges were then seal with a wax/sealant etc....job done.SJ.
|
Originally Posted by stonejedi
(Post 11406493)
Use a good tar remover first to lift any remaining adhesive then i usually clay the area then use a polish to buff up any remaining out line off where the badges were then seal with a wax/sealant etc....job done.SJ.
^^ This :thumb: |
A can of sticky stuff remover from Halfruads did the job for me, spray on and leave for a bit then wash off and polish.
|
Awesome guys ;)
|
All times are GMT +1. The time now is 11:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands