Sheds
I am in the process of getting a new shed. Or to be precise the Insurance Company are getting me a new shed, after the last one burnt down.
Anyway been offered a choice of two. One has 12mm cladding pressure treated. One has 20mm cladding not treated. Identical other than this cladding. Which is best? |
Pressure treated...... will not rot (as quickly) :)
|
I'd go for the 20mm to get the strength then slap about 3 coats of wood preserver on it!
|
Pressure treated ......... pity they dont do a 20mm pressure treated though.
How did the old one catch fire? |
Originally Posted by OllyK
I'd go for the 20mm to get the strength then slap about 3 coats of wood preserver on it!
That was my thoughts, but then the consensus in the opffice was to go for the thinner one which is pressure treated. |
Originally Posted by Chrisgr31
That was my thoughts, but then the consensus in the opffice was to go for the thinner one which is pressure treated.
|
Originally Posted by r32
Pressure treated ......... pity they dont do a 20mm pressure treated though.
How did the old one catch fire? How it caught fire is a matter of some debate. Next doors garden caught fire, either through sun glinting through a piece of glass (at 9pm in June?!) or an electical fault in their pond filtration equipment. That in turn set fire to the fence and our shed. An intersing point is that our insurance does not cover us for plants that are damaged, not a real problem to us, as the plants involved were limited in number. Another neighbour though lost a fully mature Silver Birch in the fire, which cost £900 to remove. His insurance (fortunately for him) covered plants. We would have had to pay that bill ourselves. Also in the case of a fire you can't calim off the person in who's garden it started unless you can prove they were negligent. |
Mmmmmm.... She-e-e-e-edssss. :luvlove:
I too would go for the 20mm cladding and use a good quality preservative, not a paint or stain. Cuprinol do a good one.http://www.duluxdecoratorcentre.co.u...0202&langId=-1 I would do the underside of the floor before putting it together, and mount the bearers on pads of slate so that it isn't in contact with the floor. Damp is the death of sheds. Sort the roof (the supplied felt is always ****e) and the floor (not in contact with the ground) and the walls will last for feckin' ages even without preservative. :) My twopenn'orth. :) |
Mines only 12mm pressure treated :(
Still, only the one side is exposed to the elements and it weathering nicely, apart from the knots falling out :mad: Concrete/slab base, perspex roof and proper guttering is the way to go :thumb: |
Originally Posted by Shark Man
Mines only 12mm pressure treated :(
Still, only the one side is exposed to the elements and it weathering nicely, apart from the knots falling out :mad: Concrete/slab base, perspex roof and proper guttering is the way to go :thumb: Cheapskate. :mad: |
I know :( but it's right against a fence so it doesn't see the elements, quite cosy in there after I bubble wrapped the roof :)
|
Is it ship-lap, or v-groove t&G? :)
|
Originally Posted by Bubba po
12 mil? You could poke your finger through that!
Cheapskate. :mad: they'll be posting polls to vote on next-is my shed a shed kind of thing richie:D |
Shiplap :o
|
Anyroad, Chrisgr31 (catchy handle) would you consider adding your shed to this cavalcade of seductive outbuildings when you have it erected? :)
|
Originally Posted by Shark Man
Shiplap :o
|
You'll be saying my wiggly tin favela isn't good enough next, you heartless ogres :cry:
|
20mm and preserve it well before knocking it up.. ooh err
Andy |
Originally Posted by Bubba po
Anyroad, Chrisgr31 (catchy handle) would you consider adding your shed to this collection of mini shanty towns when you have it erected? :)
richie |
Originally Posted by Bubba po
So it's actually somewhere between 5 mil and 12 mil for a third of the width of the board? :cry:
Err, something like that. But the other side is a old fashioned 8" thick claybrick wall with single cavity and a dampcourse :D |
Originally Posted by richieh
sorry couldnt help it:lol1:
richie Besides, I'm getting a new, better one... ask Shark man. http://undercovered.co.uk/guestbook1...miles/smug.gif |
Originally Posted by casualhero
You'll be saying my wiggly tin favela isn't good enough next, you heartless ogres :cry:
|
Originally Posted by Bubba po
My shed looks much better than that, these days.:mad:
Besides, I'm getting a new, better one... ask Shark man. :smug: richie:D |
Originally Posted by Bubba po
Surely Sheds have to be wood? :confused:
Anyway, I've seen Shed Seven and they were made out of Yorkshiremen :razz: |
Originally Posted by casualhero
Anyway, I've seen Shed Seven and they were made out of Yorkshiremen :razz: |
Go back Bubbagek u are not welcome here :razz:
|
Originally Posted by Bubba po
Anyroad, Chrisgr31 (catchy handle) would you consider adding your shed to this cavalcade of seductive outbuildings when you have it erected? :)
|
A man's shed is his true castle. It's a right of passage into midlife when you own your first shed :)
|
Mid life at 27 :thumb: :o
I've started keeping the Fushias in there over winter with the pots nestling happily in the bores of a defunct Rover V8 :D |
|
All times are GMT +1. The time now is 04:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands